9.89 automotive nylon Quick Connect fuel line fittings
| Parts | Material | Supplier | Supplier | Application |
| Body | PA12 GF30 | ARKEMA | EVONIK | Fuel |
| PA66 GF30/35 | BASF | DUPONT | Fuel Steam | |
| PA6/6T GF25 | BASF | HT Fuel | ||
| PA9T GF30 | KURARAY | HT Fuel |
Full Answer
How to measure fuel line fittings?
Tapered Thread
- Thread Types: Straight Thread - With straight thread the threads run parallel. ...
- AN Standards. High-end racing and performance fuel delivery systems most frequently implement fuel lines and fittings manufactured to AN Standards.
- Common Types of Fittings. ...
How to properly seal fuel fittings and fuel lines?
what do I use to seal fuel line npt fittings with?
- fumplet. Im workin on a carbed fuel system that Im using an aftermarket electrical can style fuel pump from autozone.
- CJ_1080. Use pipe thread sealant from permatex, or regular liquid thread sealant.
- KIAMBU. ...
- KIAMBU. ...
- fumplet. ...
- 68NovaSS. ...
- Overdriv. ...
- cobalt327. ...
- fumplet. ...
- fumplet. ...
How do you put fitting on steel braided fuel lines?
Tools Required
- Bench mounted vice
- Imperial spanners that have a polished face (avoid marking the anodised finish)
- 3 in 1 or similar
- A Fine tooth saw such as junior hacksaw
- Masking tape
- Pliers and snips
- Hobby knife
- Personal Protective Equipment (gloves and glasses)
- Cloth to wipe off excess oil
- Vice Jaws. ...
How to disconnect common fuel line fittings?
- AADITYA ENGINEERING WORKS
- CASA Brands India Private Limited
- Arrowtech Motors Private Limited
- Hydrokrimp A.C. Private Limited. ...
- Mahesh Engineering
- Inderjit Engg Works. ...
- Jay Kay Technical Services. ...
- Milind Enterprises
- STI Sanoh India Private Limited. ...
- Indomaksson. ...
Can nylon tubing be used for fuel line?
Nylon fuel line. Many late-model production cars are now using hard, black nylon tubing with special connectors to attach fuel-feed lines to the gas tank sending unit/fuel pump modules. This gas-resistant nylon tubing can be purchased by the foot or in short sections with the proper ends already attached to one end.
Will nylon fittings work with gasoline?
NYLON FITTINGS Nylon is resistant to a broad range of chemicals including most agricultural chemicals, ammonium compounds, detergents, diesel fuel, ethanol, gasoline, hexane, magnesium sulphate, most sodium compounds, trichloroethylene, and zinc sulphate.
How do you attach nylon fuel line?
2:544:24BEST ways to repair dorman nylon plastic fuel line tubing - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow that the hose is on you want to put the hose clamp on and then take a pair of flush. Cut pliers.MoreNow that the hose is on you want to put the hose clamp on and then take a pair of flush. Cut pliers. And crimp it on tightly.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
Can you replace steel fuel lines with nylon?
One option for replacing metal fuel lines is with a nylon tubing and specific fittings. Nylon tubing can be used for an entire length of fuel line or just a section. This option can be a cost-effective and time-efficient repair when pre-bent lines are not available.
What type of plastic is resistant to gasoline?
A sturdy plastic like high-density polyethylene (HDPE) is commonly used to make plastic gas cans and barrels because it insulates its contents, and shields gas from the heat of its environment. It's also antibacterial to prevent contamination and is rust-resistant, meaning nothing will leak out of rusted sections.
How do you attach a nylon fuel line to a metal fuel line?
2:2213:42How to replace, fix or repair a steel or nylon gas fuel line leak - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this sides for the nylon nylon line I got 15 feet of that wait 10 feet of that. But yeah theMoreAnd this sides for the nylon nylon line I got 15 feet of that wait 10 feet of that. But yeah the nylon side has a little nylon fitting it goes in here like this you just put the nut over that.
How do you soften nylon hose?
Boiling water usually works, but don't dip too much of the end into it else you no longer have a stiff tube to push, it also takes a minute in the water to soften it.
How do you install a compression fitting on a fuel line?
0:262:20How to use brake line fuel line compression fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you screw your cap on has to be perfectly straight for it to thread on properly then youMoreAnd then you screw your cap on has to be perfectly straight for it to thread on properly then you hold the center piece with a wrench and tighten the cap.
Is braided fuel line better?
Braided hose provides better heat dissipation and better flow, which is important when choosing performance car parts. Additionally, braided lines are able to withstand more pressure than rubber lines. When you need a flexible hose, you may not be able to use metal.
Are braided fuel lines safe?
Modern fuels have additives that harden and deteriorate traditional rubber hose including stainless steel-braided hose. This leads to potentially dangerous leaks and weeping.
Is PVC pipe resistant to gasoline?
Due to the nature of PVC and other plastics as well, they are not well suited to use for fuel gas or kerosene. PVC and other plastics deform easily in high temperature environments, and may leak or rupture.
Dorman OE Solutions Fuel Line Repair Kit
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line Unions
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line Unions
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line Repair Kit
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Connector
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
What is a hose coupling?
Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.
What is a barbed end fitting made of?
Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.
What is a plastic push on hose?
Plastic Push-On Barbed Hose Fittings for Water. Made of nylon, these fittings are lighter in weight than metal barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.
What is an instant fitting?
Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.
What is a built in shut off valve?
A built -in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.
What is fuel line?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.
What is the hose from fuel cell to filter?
The main line from fuel pumps to regulators (under hood) is a single neoprene 1/2 id hose. I do not see any deterioration, other than some contaminants in filter and carburetor float bowls.
What type of hose is used for a small engine?
Marine hose is rated for 40 psi and will work in a pinch for carbureted passenger cars and light trucks. Tygon fuel hose. Small engines on your lawnmower, ATV or motorcycle use a gas-resistant vinyl tubing called Tygon.
What causes water contamination in fuel cells?
What causes water contamination in a fuel cell is the condensation that does and can form in the empty portion of the tank itself and it occurs no matter what fuel you use. With gasoline, the water instantly separates and creates a layer of water, with ethanol blends, it will absorb up to a certain amount.
Can you clamp a worm gear with a neoprene hose?
Neoprene with an outer steel braiding is also offered for custom applications; however, it is difficult to clamp with a standard worm gear clamp. Special AN-type fittings are often necessary with steel-braided fuel line. When a bent filler neck hose is necessary, wire-inserted fuel hose is also offered.
Is methanol hose ozone resistant?
It is approved for all fuel blends including straight methanol, and the outer coating is also ozone- and abrasion-resistant. High-pressure fuel-injection hose can also be used in low-pressure applications, but the difference in pricing may convince you to save it for where it is needed. Nylon fuel line.
Can additives be used to prevent deterioration of fuel line?
Therefore, even the most liberal use of additives will not prevent the deterioration of fuel line not formulated to withstand it. Caution and vigilance is required, including keeping abreast of the ever-changing state of modern pump gas and it's compatibility with whatever fuel line you employ. Reply.