What is Novec 1230?
How does Novec 1230 work?
Is Novec 1230 a fluoroquinone?
Is Novec 1230 a non-conductive solution?
See more
About this website
Is Novec 1230 harmful to humans?
Relative to most fire suppression chemicals, Novec™ 1230 is not dangerous. Unlike carbon dioxide, Novec™ 1230 is considered safe to use in occupied spaces. That means if Novec™ 1230 is released inside of a room with people in it, there is no suffocation risk or other serious health impacts.
What does Novec 1230 stand for?
Novec 1230 Fire Protection Fluid is based on a proprietary chemical from 3M called a fluroroketone. The full chemical name for this compound is dodecafluoro-2-methylpentan-3-one.
What is the difference between FM-200 and Novec 1230?
Environmental Impact According to the National Fire Protection Association, Novec™ 1230 has a GWP of 1 while FM-200™ has a GWP of 3350. This means Novec™ 1230 is the more environmentally-friendly choice.
What gas is Novec 1230?
3M Novec 1230 fluid is a fluoroketone, while chemical clean agents like FM-200™ are HFCs (HFC-227ea).
Which gas is used in NOVEC?
Novec 1230 fluid extinguishes a fire before it starts by rapidly removing heat. In a typical total flooding system, the fluid is stored as a liquid in cylinders pressurized with nitrogen. Automatic detection sensors trigger release when the fire is at the incipient stage, extinguishing it in mere seconds.
What type of gas is NOVEC?
Novec1230 gas is synthetic/chemical fire suppression gas/agent. Novec1230 is a waterless fire suppressant and extinguishes a fire by removing the free radicals or heat element of the fire triangle (Oxygen, Heat and Fuel). The concentration of Novec 1230 is typically between 5.3% to 5.6% of the room volume.
What does NOVEC stand for?
NOVEC stands for Nederlandse Opstelpunten voor Ethercommunicatie and is the largest operator of antenna towers for radio-communication in the Netherlands.
What is the best fire suppression system?
FM-200 is the best fire suppression system for a number of situations, including:Offices or other places where people may be present during a fire. ... Places where entry and exit areas could be blocked—since FM-200 is a gaseous agent, it is able to respond quickly to fires.More items...
Is NOVEC same as FM-200?
The two systems differ when it comes to impact on the environment. Both agents cause no ozone depletion. FM200 has a global warming potential of 3500 while Novec 1230 has a global warming potential of 1, making Novec more environmentally friendly.
Where is Novec 1230 used?
Novec 1230 is used as gaseous fire suppression agent in scenarios where water-based fire suppression (for example, from a fire sprinkler) would be impractical or where it could damage expensive equipment or property, such as museums, server rooms, banks, clean rooms and hospitals.
What is Novec fluid?
3M™ Novec™ Engineered Fluids are non-flammable fluids used in a wide variety of industrial applications, including vapor degreasing, solvent cleaning of industrial parts, and thermal management of electronics.
Is Novec 1230 a Pfas?
PFAS, or Poly-Fluorinated Alkyl Substances. are general class of chemicals and intermediate materials used to make non-flammable dielectric fluids like Solvay Corporation's Galden® fluids as well as 3M's Novec® and Fluorinert® fluids. All of these chemicals are classified as PFAS.
SAFETY DATA SHEET 3M™ Novec™ 1230 (Fire Extinguishing Agent ...
SAFETY DATA SHEET 3M™ Novec™ 1230 (Fire Extinguishing Agent, Pressurized and Non-pressurized) Revision Date: April 10, 2015 Page 2 of 9 2.
Novec 1230 Fire Protection Specs – Fire Suppression | 3M US
Copy and paste the following text into your specification or download the full specification example.. Summary of work A. Design, supply and install a complete clean agent total flooding fire suppression system using Novec 1230 Fire Protection Fluid (hereafter referred to as SYSTEM) which meets all the performance criteria described herein.; Clean Agent Fire Suppression Fluid A. Clean agent ...
3M Novec 1230 Fluid TDS
3M™ Novec™ 1230 Fire Protection Fluid The following graph displays an example of the unique properties that differentiate Novec 1230 fluid from other agents. Over a wide range of temperatures, a high boiling material like Novec 1230 fluid, when superpressurized with nitrogen
What is Novec 1230?
Novec 1230 fluid is available to protect most hazards traditionally protected with halon 1301. The physical properties of each halon alternative determine how much agent is required to provide an equivalent level of protection.#N#Novec 1230 fluid will require approximately twice as much agent by weight as the equivalent halon system, although end use design concentrations will be similar, resulting in minimal increases in storage space for the containers.#N#It is likely that any existing pipework would need to be replaced or at least supplemented, although the exact requirement for any particular system can only be determined after a detailed review of the existing installation.#N#Room Integrity Testing#N#Room Integrity Testing has become an important feature of the commissioning of gaseous fire fighting systems. The integrity test is performed to check that enclosures can maintain a sufficient extinguishing agent concentration for the required time following discharge.#N#This time may vary according to the hazard and the available response time for the emergency services although 10 minutes is often considered to be an acceptable period.
How long does Novec 1230 last?
Novec 1230 has no harmful impact on the environment. It has an atmospheric lifetime of only five days while the closest chemical alternative has an atmospheric life time of 33–36 years.
Why is Halon 1301 important?
It is therefore available to protect most hazards traditionally protected with halon 1301 and will be particularly important in Marine applications and others where high margins of safety and long term sustainability are considered to be important features.
Is Novec 1230 a liquid?
Novec 1230 fluid has low toxicity and has a boiling point of 49 degrees C and therefore exists as a liquid at room temperature. Like halon 1301 it is super-pressurised with nitrogen to 25 bar.
Does Novec 1230 have bromine?
Novec 1230 fluid contains neither bromine nor chlorine and has zero 0zone depleting potential. The atmospheric lifetime of Novec 1230 fluid is estimated to be in the range of 3-5 days and with a global warming potential of 1, it is considered that the Novec 1230 fluid has no measurable impact on climate change.
What is Novec 1230?
When you choose Novec 1230 fluid as your clean agent, you’ll need to specify it as part of a complete fire suppression system. The system you select is based on the agent. These 3M approved original equipment manufacturers (OEMs) understand the unique chemistry of Novec 1230 fluid and have engineered their listed or approved systems to optimize its extinguishing performance and protect your critical assets.
Can you specify Novec 1230 without a brand name?
If you are required to specify without a brand name, you can also specify based on the agent's unique properties. Novec 1230 fluid combines exceptional sustainability with the highest margin of safety among clean extinguishing agents, and is not targeted for regulatory phasedown.
What is a 3M Novec 1230?
3M™ Novec™ 1230 Fire Protection Fluid is an environmentally sustainable agent that quickly extinguishes fires without damaging electronics or other valuable assets. With no residue left after a discharge, a system using 3M Novec 1230 fluid is the optimal solution for minimizing downtime and protecting people, processes and irreplaceable assets.
What is the benefit of using 3M Novec 1230 fluid?
In addition to the benefits of using 3M Novec 1230 fluid as an extinguishing agent, this system also provides the added benefits of Fike’s patented Impuls e Valve Technology, which are derived from a rupture disc-based valve:
Is Novec 1230 halocarbon?
With a global warming potential less than one, Novec 1230 fluid has 99.9 percent lower global warming potential than any halocarbon agent accepted for use in occupied spaces. It is also backed by 3M’s 20-year Blue Sky SM Warranty to protect system owners from certain regulatory bans or restrictions.
How does Novec 1230 work?
Like other halocarbon halon alternatives, Novec extinguishes principally by removing heat from the fire. Upon discharge, Novec 1230 fluid creates a gaseous mixture with air. This agent/air mixture has a heat capacity much larger than that of air alone. A higher heat capacity means that this gas mixture will absorb more energy (heat) for each degree of temperature change it experiences. At the system design concentration, the agent/air mixture absorbs sufficient heat to upset the conditions required for combustion to occur. The amount of heat the fire loses to the surroundings is increased by the presence of the agent. This causes the combustion zone to cool to the point that the fire extinguishes. Novec 1230 fluid has the highest heat capacity of the commercially available halon alternatives resulting in the lowest extinguishing concentrations for a given fuel. The design concentration for Class A combustibles is a minimum of 4.5 vol% for designs based on UL 2166 in the USA. Different minimum design concentrations may be required in other countries based on local approvals.
What is Novec 1230 fluid?
Novec 1230 fluid as a commercial product is supplied by 3M with the expressed intent and purpose for use in fire protection systems designed for its use as a clean extinguishing agent in total flooding and streaming applications. Considered a sustainable halon replacement alternative to HCFCs and HFCs, it is a specialty chemical uniquely designed for use in the highly regulated fire suppression market to help protect critical assets needing such high-performance protection. As reviewed and approved by the US Environmental Protection Agency, Novec 1230 fluid is manufactured, supplied, supported and approved specifically for such use only. It is not approved for use in any other non-fire protection/suppression applications. Novec 1230 fluid is not approved for battery immersion applications.
What is the vapor pressure of Novec 1230?
Although Novec 1230 fluid is a liquid at room temperature, its vapor pressure is sufficient for the agent to readily achieve vapor extinguishing concentrations in air. At 25⁰C, one could form vapor concentrations with Novec 1230 fluid up to 39 percent volume prior to reaching saturation. Typical fire suppression design concentrations for most applications are in the range of 4.5 to 6 percent by volume of the protected space. That large differential between design and saturation concentrations dictates that condensation of vapor will not occur.
How does Novec 1230 affect the atmosphere?
The very low water solubility of Novec 1230 fluid and the low degree to which it partitions into liquid water was found to preclude atmospheric hydrolysis from being a meaningful removal mechanism. The principal atmospheric sink for Novec 1230 agent is photolysis. It exhibits strong absorption of energy at near UV wavelengths, resulting in a very short atmospheric lifetime. The rate of photolysis under atmospheric conditions and the mechanism of decomposition of this compound have been investigated by two different research groups1,2. The photolysis rate of the fluoroketone leads to an atmospheric lifetime of approximately 1 week, which is consistent with the 3M study that found the atmospheric lifetime of Novec 1230 fluid to be on the order of 5 days.
What is Novec 1230 used for?
Novec™ 1230. Novec 1230 is used as gaseous fire suppression agent in scenarios where water-based fire suppression (for example, from a fire sprinkler) would be impractical or where it could damage expensive equipment or property, such as museums, server rooms, banks, clean rooms and hospitals.
What is Novec 649?
Novec 649 is a low temperature heat transfer fluid. It has been used as a full-immersion fluid in a proof of concept data center cooling system by Intel and SGI. As it boils off easily due to its 49 °C (120.2 °F) boiling point, it is used in two-phase immersion cooling system with a condensing loop running cold water. Effects of evaporative cooling was utilized to remove additional heat. Novec 649 is also being considered to be used for cooling silicon photomultiplier (SiPM) sensors to −40 °C (−40 °F) in single-phase configuration as part of Large Hadron Collider’s high luminosity upgrade.
What is Novec 1230?
3M™ Novec™ 1230 Fire Protection Fluid helps give you the peace of mind that you’ve made the smart choice to help safeguard all the things in your care.
What is the NOAEL for fire extinguishing agents?
The NOAEL (No Observed Adverse Effect Level) is the internationally established limit for the various extinguishing agents. The design concentration is the amount of extinguishing agent required to extinguish the fire safely. The margin of safety for humans arises from the relative difference between the design concentration and the specific NOAEL.
Is Novec 1230 waterless?
Helps protect valuable assets including electronics, irreplaceable paper documents, artefacts and archives. Because Novec 12 30 fluid is a waterless fire suppression solution, it leaves no residue and is electrically non-conductive. ...
Is Novec 1230 a non-conductive solution?
Because Novec 1230 fluid is a waterless fire suppression solution, it leaves no residue and is electrically non-conductive. Provides the highest margin of safety for human occupancy of any clean agent solution. Is not subject to the HFC phasedown under the F-Gas Regulation in Europe or any global regulatory body, including the Montreal Protocol.
What is a Novec 1230?
3M™ Novec™ 1230 Fire Protection Fluid is a clean agent fire extinguisher which was developed as a halon extinguisher replacement and hydrofluorocarbon (HFC) alternative. It belongs to a family of chemicals called halocarbons, a group which includes HFCs and fluoroketones. Novec 1230 fluid is a fluoroketone, while chemical clean agents like FM-200™ and ECARO-25® are HFCs (HFC-227ea, HFC-125). Novec 1230 fluid has a global warming potential (GWP) of less than one while these HFCs have a GWP of more than 3000. Novec 1230 fluid has the highest margin of safety for human occupancy among clean agents, including inert gas.
Is Novec 1230 a fire suppression system?
Because Novec 1230 fluid is a waterless fire suppression solution, it leaves no residue and is electrically non-conduc tive. Provides the highest margin of safety for human occupancy of any clean agent solution, making it ideal as a building fire suppression system. Is not subject to the Halon 1301 phaseout or HFC phasedown under any global ...
What is Novec 1230?
3M™ Novec™ 1230 Fire Protection Fluid is a clean agent fire extinguishant which was developed as a halon replacement and hydrofluorocarbon (HFC) alternative. It belongs to a family of chemicals called halocarbons, a group which includes HFCs and fluoroketones. Novec 1230 fluid is a fluoroketone, while chemical clean agents like FM-200™ and ECARO-25® are HFCs (HFC-227ea, HFC-125). Novec 1230 fluid has a global warming potential (GWP) of less than one while these HFCs have a GWP of more than 3000. Novec 1230 fluid has the highest margin of safety for human occupancy among clean agents, including inert gas.
How does Novec 1230 work?
Novec 1230 fluid extinguishes a fire before it starts by rapidly removing heat. In a typical total flooding system, the fluid is stored as a liquid in cylinders pressurized with nitrogen. Automatic detection sensors trigger release when the fire is at the incipient stage, extinguishing it in mere seconds.
Is Novec 1230 a fluoroquinone?
Novec 1230 fluid is a fluoroketone, while chemical clean agents like FM-200™ and ECARO-25® are HFCs (HFC-227ea, HFC-125). Novec 1230 fluid has a global warming potential (GWP) of less than one while these HFCs have a GWP of more than 3000.
Is Novec 1230 a non-conductive solution?
Because Novec 1230 fluid is a waterless fire suppression solution, it leaves no residue and is electrically non-conductive. Provides the highest margin of safety for human occupancy of any clean agent solution. Is not subject to the Halon 1301 phaseout or HFC phasedown under any global regulatory body, including the Montreal Protocol.