Receiving Helpdesk

mr heater troubleshooting guide

by Stella Simonis Published 3 years ago Updated 2 years ago

Heater Big Maxx?

  1. Check to make sure that proper, sufficient gas is available to the heater. ...
  2. Continuous, quick cycles indicate electronics issues. Complete these checks, if the exhaust fan comes on briefly, then shuts off.
  3. Check for exhaust venting next for too much back pressure, if the burners and sensors are not the problem.
  4. Mr Heater Big Maxx heat waves. ...

More items...

Full Answer

How to fix Mr heater?

Mr. Heater University | Golf Cart Heater. The patented Golf Cart heater is mounted to the top of a 1lb propane bottle and rests in a cup holder in your golf cart. The unit features a wind resistant burner and pilot system for optimal heat output in windy conditions and when the golf cart is moving. It also features a unique safety tip over ...

How do I troubleshoot Mr. heater Big MAXX?

Mr Heater BIG MAXX garage heater died???

  • Melensdad. Finally got some really cold temps and my garage heater craps out. ...
  • MrLovable. You didn't say if you have gas coming out. ...
  • bczoom. Are you running off natural gas or propane? ...
  • Melensdad. And I can see no way to manually light it.
  • bczoom. Did you check/try the reset switch (es)? ...
  • road squawker. ...
  • Big Dog. ...
  • Melensdad. ...
  • Big Dog. ...
  • Melensdad. ...

More items...

What are some common problems with Mr. Buddy heaters?

The instructions go:

  1. Inspect the device, the fittings and make sure everything is ready and safe to use.
  2. Attach a 1 lb. disposable propane canister that is compatible with a No. ...
  3. Make sure the heater and canister are in an upright position. ...
  4. At this point, if the heater is ready to go, press the on button for 30 seconds. ...

More items...

How to install a Mr. heater garage heater?

  • Lift the Gas Heater with Block and Tackle. ...
  • Clamp the Heater to the Joists and Bore Clearance Holes. ...
  • Secure the Gas Heater to the Joists with Carriage Bolts. ...
  • Attach the T-shaped Flue and Mark Its Position at the Roof. ...
  • Cut a Hole in the Roof for the Flue Pipe. ...
  • Install the Funnel-shaped Flashing to Waterproof the Flue Opening. ...

More items...

How to tell if a thermocouple is bad?

Why is my lighter not emitted?

Why will my Mr. Heater not stay lit?

When a propane heater won't stay lit, often what is happening is that the propane heater may sense that the flame is defective in some way, triggering the propane heater's safety functions and causing it to shut off. The problem may be a genuine defect or it could be an issue with the sensor.

How do I fix the pilot light on my Mr. Heater?

1:224:20Easy Mr. Buddy Heater FIX - No pilot light and won't stay lit - YouTubeYouTubeStart of suggested clipEnd of suggested clipLight. Here i just took a capful. And i'm going to take my q-tip. And put it in the alcohol. We'reMoreLight. Here i just took a capful. And i'm going to take my q-tip. And put it in the alcohol. We're going to go ahead and stick. It into the pilot light and it's going to go all the way.

How do you bypass the safety switch on a Mr. Heater?

1:414:05Little Buddy Mr Heater Tip sensor bypass - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe gas on the unit here so by pulling those apart I bet this one in a little bit and slid it insideMoreThe gas on the unit here so by pulling those apart I bet this one in a little bit and slid it inside to make connection.

How do you service a Mr. Heater?

0:432:30Portable Buddy - Cleaning and Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide the nozzle extension two inches into the pilot tube and blow out the tube with three or fourMoreSlide the nozzle extension two inches into the pilot tube and blow out the tube with three or four quick bursts of air now check for dust lint or spider webs in the casing.

What would cause propane heater to stop working?

The most common reasons for a non-working propane heater are a dirty thermocouple, a thermocouple that is too far from the flame, a blocked pilot tube, an empty/overfilled gas canister, and drafts. Fortunately, the majority of homeowners will be able to take care of these issues on their own.

How do you bypass a thermocouple on a Mr heater?

3:556:48How to bypass your thermocouple on a propane heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipMore waiting for the stupid thermocouple. To light now. That's how you bypass it oh and let me showMoreMore waiting for the stupid thermocouple. To light now. That's how you bypass it oh and let me show you which one this is just one of us here is let me show you the parts.

How does a heater tip over switch work?

A common use of Tip-Over switches is in portable domestic Electric & Gas heaters to prevent fire & shock. If the heater is tilted more than a specified angle, the Tip Over switch is used to switch off the heater. Normally closed (tilt to open) and Normally open (tilt to close) switches are available.

How do you hook up a Mr heater to a propane tank?

2:085:17How to connect 20 lb Propane tank to Mr. Heater Big Buddy - YouTubeYouTubeStart of suggested clipEnd of suggested clipBelow where you can find the mr heater 12 foot hose connector. They also make a five foot hose. AsMoreBelow where you can find the mr heater 12 foot hose connector. They also make a five foot hose. As well as mr heater big buddy if you need some extra space heat we'll have all those links.

How do I store my Mr Buddy heater?

3:304:21Portable Buddy - Operation and Accessories - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd maintenance video for tips on how to take care of your heater. Mr. Heater is America's mostMoreAnd maintenance video for tips on how to take care of your heater. Mr. Heater is America's most popular brand of portable heaters.

Why does my Mr heater make a whistling noise?

The pilot gas tube is the lowest tube in the heater and all the oil that makes it past the filter migrates there and gets forced through the orifice(if you're lucky)making a whistling gurgling noise.Our mr heater emits an annoying low whistle. didn't used to do this ...https://www.amazon.com › ask › TxGFQBCVCIVYHYhttps://www.amazon.com › ask › TxGFQBCVCIVYHYSearch for: Why does my Mr heater make a whistling noise?

Why does my propane heater flare up?

Insects get in the air tubes and clog it up in the summer time, you need to clean the gas/air tube where the 2 holes are that let air in to mix with the gas. I had the same problem once, the station that filled my propane tank put too much in and it was flaming up about 2-3 inches above the chrome gaurd.Question on Mr. Heater flaming???? - Outdoor Gear Forumhttps://www.in-depthoutdoors.com › equipment_269023https://www.in-depthoutdoors.com › equipment_269023Search for: Why does my propane heater flare up?

How do you clean a propane heater?

0:4618:23Cleaning a vent free gas heater pilot light - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow see all the dust in this heater. There's a lot of dust. And. This is just from the you know theMoreNow see all the dust in this heater. There's a lot of dust. And. This is just from the you know the heat vacuuming up through here it gets a lot of dust.Cleaning a vent free gas heater pilot light - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you clean a propane heater?

12 Common Mr. Heater Buddy Problems & Troubleshooting Tips

2. Pilot Flame Stays On When I Release the RED ON Button? This is another common issue among the entire family of Mr. Heater Buddy products. More likely than not, either the TIP switch or the OFF switch will need to be restarted.

What Are Some Common Problems With Mr. Buddy Heaters?

Common problems with Mr. Heater Big Buddy heaters include clogged regulator and control valves, noisy and weak fans, leaking hoses and fuel inefficiency, states TacticalIntelligence.net. The heaters can also not be repaired once damaged.

How to Light a Mr Heater: Solving Common Problems and Tips

1. Sensors - this is a very common issue you may face more than once in the time you own a Mr. Heater. The sign that lets you know this is the problem is when the pilot light won’t stay lit. When the sensors go bad, the device may trigger its safety options and shut the flame down.

Mr. Heater Repair Questions & Solutions, Tips & Guides - Fixya

View recent Mr. Heater questions, problems, & answers. Get free expert DIY tips, handy support, troubleshooting help & repair advice for all Mr. Heater products.

Common Mr. Heater Big Maxx Problems - HouseholdAir

The Mr Heater Big Maxx is a convection heater that can heat up to 1850 sq ft of space with its max setting. This unit can supply heat for up to 12 hours on one tank of gas, which is very convenient.

How to tell if a thermocouple is bad?

What are the symptoms of a bad thermocouple? 1 The heater does not light up as the thermocouple is not signaling the release of gas. 2 The pilot light is not able to stay on consistently due to a malfunctioning thermocouple. 3 The pilot light is flaming red or orange due to excessive gas release based on the thermocouple’s mixed signals.

Why is my lighter not emitted?

Another cause of a malfunctioning pilot is a draft. This is because too much wind will keep putting off the flame. To remedy this situation, ensure you place the heater away from the room’s drafty part being heated.

BUSINESS HOURS

UPCOMING SPECIAL HOURS: The office will close at 3:00 pm EST Friday, February 18th through Monday, February 21st. W e will resume seasonal business hours at 8:00 am EST on Tuesday, February 22nd. Thank you.

TO ORDER SERVICE PARTS ONLY - IN CANADA

For Canadian customers only - If you know which part number (s) to order, please visit LionCove Canada to place your order.

Small Pilot flame on MrHeater MHBF20lpt & pilot won't stay on

You will probably need to remove the pilot orifice and clean it out use a small needle or orifice cleaning rod. The pilot flame is not big enough to keep the thermocouple engaged.

When I press down and

When the pilot lights continue holding the button down for a full minute and then release. It should stay lit then to allow you to turn it to the on position. If the pilot will not stay lit after holding it for the full minute, then the thermocouple will need to be replaced. Hope this helps.

Mr. Heater Big Maxx - Green light is off. I put in a new 3 amp fuse (even thought the original looked ok) and light is still off. Checked wires at connection and have good volts. Basically new unit

With multimeter check l1 to ground on control board. Also check 24vac to ground to verify high and low voltage present at board.

My mr. Heater lights only stays lit for about 3 minutes and then it goes out

I had this same problem with my heater. I cleaned the propane tube where the flame comes out (after it’s off and cooled down) with a Qtip and some alcohol. After removing some cotton, it will fit all the way down to the end of the tube. Repeat until it comes out clean and stays lit.

Pro installed new Mr. Heater 2500btu radiant natural gas heater to Mr.Heater specs. when checked ceiling and the wall are hot 180 degrees is this normal or is something wrong or need heat shields?

There is nothing on line about heat shields I would go direct to M r heater with model and serial number and ask them .

Why does my Big Buddy Mr. Heater make a whistling or humming noise?

mr heater makes a whistling sound as gas escapes around the gasket of the ceramic heating elements, that is ,all around the outside edges of the ceramic heating elements.

How do i disable the oxygen sensor on a mr buddy heater

The responses so far I don't believe are answering the question. Instead, they are mentioning potential problems not related to the question.

How to tell if a thermocouple is bad?

What are the symptoms of a bad thermocouple? 1 The heater does not light up as the thermocouple is not signaling the release of gas. 2 The pilot light is not able to stay on consistently due to a malfunctioning thermocouple. 3 The pilot light is flaming red or orange due to excessive gas release based on the thermocouple’s mixed signals.

Why is my lighter not emitted?

Another cause of a malfunctioning pilot is a draft. This is because too much wind will keep putting off the flame. To remedy this situation, ensure you place the heater away from the room’s drafty part being heated.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version343msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[16:50:32] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[16:50:32] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[16:50:32] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[16:50:32] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[16:50:32] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[16:50:32] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[16:50:32] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[16:50:32] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[16:50:32] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (13.86ms)
  • Application (329ms)
  • 1 x Application (95.83%)
    328.95ms
    1 x Booting (4.04%)
    13.86ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed308ms
    • select * from `posts` where `published_at` <= '2025-06-08 16:50:32' and `slug` = 'mr-heater-troubleshooting-guide' and `posts`.`deleted_at` is null limit 1
      2.67ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-08 16:50:32
      • 1. mr-heater-troubleshooting-guide
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 36491 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      12.46msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 36491
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      830μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      350μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      240μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      291ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 43977 limit 1
      890μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 43977
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        E6yH6riVN4bsIDE3ncl2ccbjlqSV2ywzDKmhRBPt
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/mr-heater-troubleshooting-guide" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /mr-heater-troubleshooting-guide
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=d572a33a66363d7b.1749381621.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlV5UGMwalRJZmJWbFpBV2plZHByT3c9PSIsInZhbHVlIjoiUXZhZ1ZGNWVIRzBvNTQxSjVPTFN2d0c3K2NvZHJtNDU1bEQ1QWlKTDJkT0J5L1NxanlEdkR5UHlGTWxqQUN0eEtjMmR6eVcxdE9ZWGJHVlB0UGxyaTUzR2hjdUVTdEJWSVB0bjJPeFpnR3RRNGQvZTA0YnBQZ2ZnZlZDREdCUlAiLCJtYWMiOiI1OThiNGYyNDYyZDMyYjg0NjhiOTk2NTIxOTY5YjI2ZDlkNjg2YjJkNmE0YzlmNWE0OGY3ZmMzZTg0NzJkNDZiIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6Ik5jaEhKeXQ5YUhqRTUzbXRnTklhVEE9PSIsInZhbHVlIjoiNWgvL1hPMHJDRitFYWoyUE15bllqdWNXc1V0V3REMmRFbzVjUzl2S29IQzlveGM1Nm4zTHlob3ZqTGdjR1RKeXpOckFiOTBQR3ltRGJNaktYMGVUTGNFMm5sd3pJdTVSR0plMFp5VFdFbEVwVjl1ODRwL2o2MklBK0c3dSs5RG4iLCJtYWMiOiI0NDliZWJhNGQ1MTA4NGQ1MWFiYTIyNDA2MjU4Y2Y5ZTkxMWJmODNkMTg1YWFlNTUxMDhmNmE4NWZiNmFjNjY3IiwidGFnIjoiIn0%3D_pk_id.64.7c30=d572a33a66363d7b.1749381621.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlV5UGMwalRJZmJWbFpBV2plZHByT3c9PSIsInZhbHVlIjoiUXZhZ1ZGNWVIRzBvNTQxSjVPTFN2d" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.225" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94c80021fcbc0046-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.225, 172.70.127.189" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/mr-heater-troubleshooting-guide" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/mr-heater-troubleshooting-guide" "REMOTE_PORT" => "60750" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.127.189" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=d572a33a66363d7b.1749381621.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlV5UGMwalRJZmJWbFpBV2plZHByT3c9PSIsInZhbHVlIjoiUXZhZ1ZGNWVIRzBvNTQxSjVPTFN2d0c3K2NvZHJtNDU1bEQ1QWlKTDJkT0J5L1NxanlEdkR5UHlGTWxqQUN0eEtjMmR6eVcxdE9ZWGJHVlB0UGxyaTUzR2hjdUVTdEJWSVB0bjJPeFpnR3RRNGQvZTA0YnBQZ2ZnZlZDREdCUlAiLCJtYWMiOiI1OThiNGYyNDYyZDMyYjg0NjhiOTk2NTIxOTY5YjI2ZDlkNjg2YjJkNmE0YzlmNWE0OGY3ZmMzZTg0NzJkNDZiIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6Ik5jaEhKeXQ5YUhqRTUzbXRnTklhVEE9PSIsInZhbHVlIjoiNWgvL1hPMHJDRitFYWoyUE15bllqdWNXc1V0V3REMmRFbzVjUzl2S29IQzlveGM1Nm4zTHlob3ZqTGdjR1RKeXpOckFiOTBQR3ltRGJNaktYMGVUTGNFMm5sd3pJdTVSR0plMFp5VFdFbEVwVjl1ODRwL2o2MklBK0c3dSs5RG4iLCJtYWMiOiI0NDliZWJhNGQ1MTA4NGQ1MWFiYTIyNDA2MjU4Y2Y5ZTkxMWJmODNkMTg1YWFlNTUxMDhmNmE4NWZiNmFjNjY3IiwidGFnIjoiIn0%3D_pk_id.64.7c30=d572a33a66363d7b.1749381621.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlV5UGMwalRJZmJWbFpBV2plZHByT3c9PSIsInZhbHVlIjoiUXZhZ1ZGNWVIRzBvNTQxSjVPTFN2d" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.225" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94c80021fcbc0046-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.225, 172.70.127.189" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749381632.3296 "REQUEST_TIME" => 1749381632 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "E6yH6riVN4bsIDE3ncl2ccbjlqSV2ywzDKmhRBPt" "askhelpdesk_session" => "d3b01SkRms7xHmBu8oOLC6HRUjkbRIA0LSOE7mHc" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sun, 08 Jun 2025 11:20:32 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InRjVXpwQ1BSR1VzL2RxVi85ZVY3RGc9PSIsInZhbHVlIjoiMktIbC92YktPQkUrdVEyY3hkYWM3WFFaUEdSK1JKWWJMUUMrQTNFWHUxM0hlT2lzNkZiMjJlQndLdU1neU80em4rb1ZaSEJHUElneDZiaHlkdGtHUHRObTE2UG5SclUwYUhYNlNMRmhUd0xwZzdQTzhnaWVFVkJVcjZvMFpaQkwiLCJtYWMiOiJiN2YzMDIxZWFhYzQxYWQ1MGI5ZjliMTVlOGU3MWE3YmQ5ZmM0N2NlZmRmNTQ0OWJmMGYwZTM2ZDM0YjU2MmQ1IiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 13:20:32 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6InRjVXpwQ1BSR1VzL2RxVi85ZVY3RGc9PSIsInZhbHVlIjoiMktIbC92YktPQkUrdVEyY3hkYWM3WFFaUEdSK1JKWWJMUUMrQTNFWHUxM0hlT2lzNkZiMjJlQndLdU1neU80em4rb1ZaS" 1 => "askhelpdesk_session=eyJpdiI6Ik9zQnpFWU00V1p5VW5UcU9YS09Ccnc9PSIsInZhbHVlIjoiMDdtcytuOFNSV2FQM01ybmNDc2JuczFScFlaMkwxaVliY1VNYXdtemxqOWg1a2pkSzM5T0VzbmE5WkllajBFRnBTamRNa0p1d1VKTmdlUm1nU2lUQVhtQlZlSWdLeEZXRjhkdTd6MnQwOExQYTN2OVZ4QXk3cEtMa1VHM1VnY1YiLCJtYWMiOiI0NDZlNGU3ZWI4Yzk0M2Y5ZWU1N2VhZTllNjBjYjY4ZTM2YjkyN2Y5MGY0YjNjYmI5MDM2ZjY2YjQ4N2JlYTQwIiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 13:20:32 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6Ik9zQnpFWU00V1p5VW5UcU9YS09Ccnc9PSIsInZhbHVlIjoiMDdtcytuOFNSV2FQM01ybmNDc2JuczFScFlaMkwxaVliY1VNYXdtemxqOWg1a2pkSzM5T0VzbmE5WkllajBF" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InRjVXpwQ1BSR1VzL2RxVi85ZVY3RGc9PSIsInZhbHVlIjoiMktIbC92YktPQkUrdVEyY3hkYWM3WFFaUEdSK1JKWWJMUUMrQTNFWHUxM0hlT2lzNkZiMjJlQndLdU1neU80em4rb1ZaSEJHUElneDZiaHlkdGtHUHRObTE2UG5SclUwYUhYNlNMRmhUd0xwZzdQTzhnaWVFVkJVcjZvMFpaQkwiLCJtYWMiOiJiN2YzMDIxZWFhYzQxYWQ1MGI5ZjliMTVlOGU3MWE3YmQ5ZmM0N2NlZmRmNTQ0OWJmMGYwZTM2ZDM0YjU2MmQ1IiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 13:20:32 GMT; path=/XSRF-TOKEN=eyJpdiI6InRjVXpwQ1BSR1VzL2RxVi85ZVY3RGc9PSIsInZhbHVlIjoiMktIbC92YktPQkUrdVEyY3hkYWM3WFFaUEdSK1JKWWJMUUMrQTNFWHUxM0hlT2lzNkZiMjJlQndLdU1neU80em4rb1ZaS" 1 => "askhelpdesk_session=eyJpdiI6Ik9zQnpFWU00V1p5VW5UcU9YS09Ccnc9PSIsInZhbHVlIjoiMDdtcytuOFNSV2FQM01ybmNDc2JuczFScFlaMkwxaVliY1VNYXdtemxqOWg1a2pkSzM5T0VzbmE5WkllajBFRnBTamRNa0p1d1VKTmdlUm1nU2lUQVhtQlZlSWdLeEZXRjhkdTd6MnQwOExQYTN2OVZ4QXk3cEtMa1VHM1VnY1YiLCJtYWMiOiI0NDZlNGU3ZWI4Yzk0M2Y5ZWU1N2VhZTllNjBjYjY4ZTM2YjkyN2Y5MGY0YjNjYmI5MDM2ZjY2YjQ4N2JlYTQwIiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 13:20:32 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6Ik9zQnpFWU00V1p5VW5UcU9YS09Ccnc9PSIsInZhbHVlIjoiMDdtcytuOFNSV2FQM01ybmNDc2JuczFScFlaMkwxaVliY1VNYXdtemxqOWg1a2pkSzM5T0VzbmE5WkllajBF" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "E6yH6riVN4bsIDE3ncl2ccbjlqSV2ywzDKmhRBPt" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/mr-heater-troubleshooting-guide" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]