How much does a mill and overlay cost?
An asphalt overlay costs $1 to $3 per square foot and lasts 8 to 15 years. After surface repairs, pavers apply a 1.5" to 2" thick asphalt topcoat. An asphalt mill and overlay costs $1.25 to $3.75 per square foot.
How much does an asphalt overlay cost per square foot?
An asphalt overlay costs $1 to $3 per square foot and lasts 8 to 15 years. After surface repairs, pavers apply a 1.5" to 2" thick asphalt topcoat.
Do I need to mill and repair my pavement before overlaying?
However, a seriously deteriorated pavement may require milling and repair before overlaying. The overlaying process involves: Evaluation — not all asphalt surfaces are subject to overlay.
How much does it cost to Mill an asphalt driveway?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does it cost to recycle asphalt?
The cost of recycled asphalt ranges from $7 to $60 per ton depending on geographic location and the percentage of recycled material in the mixture. Homeowners typically spend between $55 and $460 for asphalt millings to pave a standard-sized double driveway. That cost does not include installation labor and materials.
What is asphalt milling?
Asphalt millings are recycled asphalt, milled, heated and reused in various residential projects. Recyclers crush and reuse asphalt to pave driveways, patios, sports courts and parking lots. They spread, then compact the pieces to create a smooth surface. Not only is it more cost-effective, but it's also more environmentally friendly ...
How much does a ton of asphalt cost?
One ton of asphalt millings covers 80 square feet at a few inches thick. A ton costs between $7 and $60, depending on the amount of recycled asphalt pavement in the mixture. The fewer recycled materials the more expensive the mix.
How thick is a ton of asphalt?
A ton of asphalt millings typically covers about 80 square feet at 3 to 4 inches thick.
What is recycled asphalt used for?
Recycled asphalt can be used in a variety of residential and commercial applications. It's a good alternative for driveways, patios, walkways, basketball and tennis courts, playgrounds and small parking areas.
How much does it cost to build a tennis court?
A 78 by 36-foot tennis court requires 35 tons of recycled asphalt at an average cost of $702. The cost to build a basketball court averages $35,000. Part of that cost includes the cost of materials like asphalt. Using recycled asphalt instead of virgin materials can lower the material cost.
Is recycled asphalt good for driveways?
Recycled asphalt is a great option for driveways. It offers a solid, smooth surface for parking vehicles, and it holds up to extreme temperatures. It doesn't require as much maintenance as traditional asphalt surfaces. Homeowners don't have to fill cracks or periodically seal the blacktop.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How much does it cost to resurface an asphalt driveway?
Stamping, patterns, or colored asphalt resurfacing costs $3 to $8 per square foot. The average cost to resurface an asphalt driveway is $400 to $1,800, depending on the blacktop size and condition.
How long does asphalt last?
Asphalt resurfacing lasts 8 to 15 years on average. However, a newly reconstructed asphalt pavement lasts between 20 and 30 years with proper maintenance. Resurfacing is only a long-lasting solution when the original pavement foundation is strong.
How much does it cost to remove asphalt?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does stamped asphalt cost?
Colored or stamped asphalt overlays cost $3 to $8 per square foot total. Stamped asphalt mimics the look of stone or brick pavers. After resurfacing, contractors compact a wire template onto the hot asphalt. Coloring is either a surface coating or colored-rock paving additive.
How much does it cost to resurface a parking lot?
The average cost to resurface a parking lot is $1 to $3 per square foot or $300 to $900 per parking space. The average parking space needs 300 square feet to include room for the stall, lanes, entrances, and exits. Additional fees for inspections and permits vary by city.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot or $600 to $1,800 for a 24×24 (2-car) driveway. Installing gravel is easier and typically includes minor grading and leveling. Return to Top.