Choose any of the following combinations of keys to reset the front panel of a Maytag fridge:
- Simultaneously hold down the ‘lighting’ and ‘power save’ buttons for about 8 seconds.
- Press the ‘ref’ and ‘freezer’ buttons at the same time and hold them for about 8 seconds.
- Hold the ‘vacation’ and ‘quick freeze’ buttons down at the same time for 8 seconds.
- Simultaneously, hold down the ‘filter reset’ and ‘ice type’ buttons for 10 seconds.
Full Answer
How to troubleshoot the Maytag ice maker?
How to Troubleshoot the Maytag Ice Maker 1 Ice maker turned off 2 Ice maker jammed 3 Water filter needs to be replaced 4 Water system needs to be flushed 5 Check water supply line More ...
Is there a reset button on an ice maker?
Most ice maker models also have a reset button. Models with a display panel can be reset by consulting your manual for the reset instructions. Other models may have a “test” button or a place to insert a pin to reset the ice maker. Do not press the reset button repeatedly, as it can cause damage to the ice maker or water to overflow.
How do I Reset my ice maker on my LG refrigerator?
Unplug your GE refrigerator for 30 seconds, and within 15 seconds of restoring power, press down the ice feeler arm three times in succession. This video tutorial from LG will show you how to reset your LG refrigerator ice maker quickly. Scotsman ice machines can be reset simply by holding down the “Off” button for about 10 seconds.
How do I Reset my Manitowoc ice maker?
Most Frigidaire models have a hard reset that can be accomplished by holding down the On/Off button until the LED light turns red. Wait 10 seconds and hold down the same button until the LED light turns green. This guide can walk you through the steps of resetting the various models of Manitowoc ice makers.
Where is the on/off switch on a Maytag ice maker?
Why does my Maytag ice maker stop working?
What temperature should my Maytag ice maker be?
Why does my ice maker hum?
What to do if ice maker switch is defective?
Why does my ice maker need to be down?
What happens if you crack an ice tray?
See more
Is there a reset button on a Maytag ice maker?
Try a Simple Reset If it is not a mechanical or parts failure, this simple fix may get your ice maker working again. Most ice maker models also have a reset button. Models with a display panel can be reset by consulting your manual for the reset instructions.
How do you reset the icemaker on a Maytag refrigerator?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
Where is the reset button on ice maker?
You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.
How do I manually reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
Why did my Maytag fridge stop making ice?
There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your water supply line, or a clogged water filter.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
How do I test my Maytag ice maker?
2:2120:28How to Test and Replace Maytag/Whirlpool Gold Ice Maker ...YouTubeStart of suggested clipEnd of suggested clipYou have to get into diagnostics. And you do that by shutting. The left door holding the twoMoreYou have to get into diagnostics. And you do that by shutting. The left door holding the two leftmost buttons on the display hold it for three seconds.
Why would an ice maker suddenly stop working?
If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Why is my ice maker not working but water does?
Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won't fill with water to make ice, replace the water inlet valve.
How long does it take for the ice maker to reset?
Leave the refrigerator unplugged for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again.
How do you reset ice O Matic?
0:291:17Resetting and Restarting an Ice O Matic Elevation Series Machine 1YouTubeStart of suggested clipEnd of suggested clipOkay now to reset these flashing lights all you have to do is press and hold both of these twoMoreOkay now to reset these flashing lights all you have to do is press and hold both of these two buttons at the same time for three seconds when you see the blue.
How do you troubleshoot an ice maker?
1:025:02Ice Maker Not Working? - Check these 6 Things first! - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsually on all ice makers there's an on off switch you want to find out where that's at on thisMoreUsually on all ice makers there's an on off switch you want to find out where that's at on this particular. Model it's an easy on off switch right here if it's not on the on.
What causes an ice maker to stop working?
There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your water supp...
Not dropping ice
If your ice maker is not dropping ice, it could be that there’s a blockage in the ice tray, or an ice cube is jammed between the bin and the lever....
Not making enough ice
There could be several reasons your ice maker might not be making enough ice, including low water pressure or a kink in the water line. To check if...
Not making any ice
The culprits behind your ice maker not making any ice may cover a wide range, as listed below:Make sure your freezer’s thermostat is set to 0ºF for...
Leaking into freezer or on floor
Water leaking from the ice maker could mean that either your refrigerator or ice maker isn’t level. A faulty water line could also be responsible.L...
Ice is too small or tastes funny
Ice that has a weird taste or ice cubes that come out too small could be caused by the water line, or food odors from your freezer being absorbed b...
Maytag Refrigerator Control Panel Problems and How To Fix It
Most refrigerators, those from Maytag included, are usually built pretty well and are designed to last for a long time. That being said, modern fridges are a lot more complicated than they used to be, and nowadays fridges come with features like internal cameras, the ability to connect to a home network, and a built-in control panel. Maytag refrigerators are known to be susceptible to certain ...
HOW-TO: Maytag Refrigerator ICE Ice maker not making ice
How to Replace Icemaker Cycling Thermostat for Maytag ICE Ice maker not making ice #AP6010137. Step by step instructions on how to replace a Icemaker Cycling Thermostat for Maytag ICE Ice maker not making ice #AP6010137 for Freezer, Ice Machine, Refrigerator made by Whirlpool, KitchenAid, Roper, Kenmore, Maytag, Magic Chef, Norge, Admiral, Dacor, Jenn-Air, Estate, Crosley, Jade, Hoover, Amana.
Where is the on/off switch on a Maytag ice maker?
Depending on the model, the on/off switch may be located on the ice maker or be accessed through the digital display on the front of the refrigerator. If you have a digital display, check that the “ice on” icon is selected, ...
Why does my Maytag ice maker stop working?
In most cases, the ice maker stops working because of ice build-up or the need for a new water filter. The next most common cause is a fault with the water inlet valve, which is relatively easy to check and replace. Read on to get your Maytag ice maker working again.
What temperature should my Maytag ice maker be?
For your Maytag ice maker to work correctly, the freezer temperature should be between 0 to 5 degrees Fahrenheit (-18 to -15 degrees Celsius). Checking and adjusting the refrigerator and/or freezer temperature may get the ice maker working again. If the temperature is too high, cleaning debris off the refrigerator condenser coils will often fix ...
Why does my ice maker hum?
The water inlet valve can become defective if the valve becomes blocked with mineral deposits, which stop the part from opening. An unusual hum coming from the refrigerator when the ice maker should be filling up with water indicates a blocked valve. If the valve is blocked, it is recommended that the valve be replaced.
What to do if ice maker switch is defective?
If the ice maker switch seems defective, test it for continuity with a multimeter to determine if it needs to be replaced.
Why does my ice maker need to be down?
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
What happens if you crack an ice tray?
If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.
Why is my ice maker not working?
What causes an ice maker to stop working? There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your water supply line, or a clogged water filter.
How to get ice out of a fridge?
Remove the ice bin to see if there’s ice accumulation. Remove any blocked ice by carefully chipping at it with a plastic knife. If the ice is too large, you may have to let the ice melt by defrosting your fridge. 2.
What does it mean when water leaking from the ice maker?
Leaking into Freezer or On Floor. Water leaking from the ice maker could mean that either your refrigerator or ice maker isn’t level. A faulty water line could also be responsible. Level your refrigerator if you find that it’s unlevel or wobbly.
Why is my ice maker not making enough ice?
There could be several reasons your ice maker might not be making enough ice, including low water pressure or a kink in the water line. To check if that may be the case, follow the steps below. Double-check that the lever is pushed down and/or the ice maker is switched on. Unplug your refrigerator. Cut off the water supply.
Why does ice taste so small?
Ice that has a weird taste or ice cubes that come out too small could be caused by the water line, or food odors from your freezer being absorbed by the ice. Check your water line and look for any kinks, bulges or damage. If you see any, you’ll need a replacement.
Can an ice maker make ice?
Your ice maker won’t make any ice if the temperature exceeds 5ºF. Learn more about the best refrigerator and freezer temperatures with this guide. If your freezer has an arm lever, make sure it’s pushed down. If the arm is up, your ice maker won’t make any new ice.
How to reset Maytag refrigerator water filter?
To reset the water filter on a Maytag refrigerator after changing the water filter, follow the steps below: Step 1: Find and press the ‘water filter’ button on the control or display panel in front of your Maytag fridge. Step 2: Hold it down for about 5 seconds then release it.
How to reset Maytag fridge after power outage?
To reset your Maytag fridge after a power outage, unplug it from the power source and let it cool for about thirty minutes. This is to give the compressor time to stabilize and be able to restart. This is especially true if the duration of the power outage is very brief.
How to reset a refrigerator?
Hold down the ‘power cool’ and ‘power freeze’ buttons together for 8-10 seconds. Press the ‘vacation’ and ‘power freeze’ buttons of your fridge for 8-10 seconds. Doing any of the above will reset the front panel of your refrigerator.
Why won't my fridge reset after power outage?
If these still don’t reset your fridge after a power outage, it is time to get professional help . This is because the problem could be with the wiring.
How to lower the temperature on a refrigerator?
Press the door alarm key on the control panel in front of the fridge and hold it . Then, go to the key that decreases the temperature of the freezer and press it, too.
How long does it take for a fridge to stabilize?
Step 5: Stabilize Temperature. Give the fridge about 24 hours in order to stabilize the chosen temperature. Your fridge’s compressor is reset. However, if this reset procedure does not work, it is time to get a professional to take a look at it. It could be time to replace the compressor.
How to change the number on a refrigerator?
Change the numbers on the display by pressing the keys that decrease or increase fridge/freezer temperature. The up key for freezer temperature moves the decimal point while the up key for fridge temperature displays the numbers.
Is the ice maker turned on?
Verify that the ice maker is turned on. If the ice maker’s water supply is not connected to water supply line, turn the ice maker off. If the ice maker is on, but disconnected to water supply line, the following could happen:
Is the ice maker jammed?
First, ensure that ice is not jammed in the ejector arm of the ice maker. Remove jammed ice from the ejector arm using only a plastic utensil so the ice maker is not damaged. This will likely resolve the issue.
Does your water filter need to be replaced?
A clogged or incorrectly installed water filter will reduce the water flow to the ice maker and could cause thin, low or no ice production.
Was the water system flushed after filter installation or replacement?
Flush the system is needed every time the filter is changed or once the refrigerator is installed to the water supply line for the first time. Air in the water system may cause dripping at the dispenser or small/hollow ice cubes.
Check the water supply line
When checking the water supply line, ensure the water supply is properly connected to a cold water supply and the water shutoff valve is fully opened.
How to reset a portable ice maker?
How to Reset Portable Ice Makers. If your tabletop ice maker doesn’t have a reset button, simply turn it off and unplug it. You can check the water tray, or clean it up as necessary, but wait at least 10 minutes before you plug it back in to achieve the reset.
What to do if your ice maker is not working?
1. If your ice maker is running but not producing ice, check the thermostat.
Why won't my ice maker stop making ice?
If your ice maker has gone into overdrive and won’t stop producing ice, it is usually because the bail arm (sometimes called feeler arm) is off balance. If moving the arm up and down manually doesn’t help, then pushing it to an “Off” position and resetting your ice maker is usually the answer.
Why does my ice maker stop dispensing ice?
The primary reason ice makers stop dispensing ice is that the ice chute has been clogged. Usually, cleaning out the bin and manually checking the chute can resolve this issue. If the problem persists, you may have a clogged water line or built-up frost that needs cleaning out. This guide from GE can help.
Can you reset an ice maker?
Thankfully, resetting your ice maker can go a long way in getting your machine back up and working properly. However, if that doesn’t work, there are still a few other things you can check before calling a professional.
The refrigerator ice maker was not working
After finding out the cost that we would have to pay for the repair locally, I went to Appliance parts pro.com. with the intention of finding out the cost for parts. We had been quoted $100 for the first hour which included repair if it could be done under the first hour plus parts.
Ice maker module stopped working
I ORDERED THE MDULE ON A THURSDAY EVENING AT 3:35 PM. AT 8:30 AM ON FRIDAY MORNING UPS DELIVERED THE PARTS TO MY DOOR! BY 11;00 AM MY ICE MAKER WAS PRODUCING ICE ONCE AGAIN. A VERY GOOD EXPERIENCE ALL THE WAY THROUGH.
Water leaking from ice maker
Ordered all moving parts, received them quickly and rebuilt ice maker. Installed ice maker and within 8 hours it was making ice.
Leaking ice maker in freezer causing ice block & icicles
Ordered water inlet valve, watched repair video and installed it very quickly. Totally solved problem. Defrosted freezer and working great now.
Icemaker stopped producing ice
I searched You Tube for videos on icemaker troubleshooting/repair for a Whirlpool refrigerator until I found a couple that matched my refrigerator. From the You Tube videos I learned how to remove the icemaker and locate the model number.
The icemaker stopped working
I went on youtube and searched out all the possibilities of why it wasn't making ice. That search was came down to the icemaker. I ordered a icemaker from you and had it fixed in about 10 minutes.Having that unit as a slide in and a plug-in makes it awfully easy to fix it. Everything is working fine.
Ice maker wouldnt make ice
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!! The do it yourself video was extremely helpful and made the repair very easy.
Where is the on/off switch on a Maytag ice maker?
Depending on the model, the on/off switch may be located on the ice maker or be accessed through the digital display on the front of the refrigerator. If you have a digital display, check that the “ice on” icon is selected, ...
Why does my Maytag ice maker stop working?
In most cases, the ice maker stops working because of ice build-up or the need for a new water filter. The next most common cause is a fault with the water inlet valve, which is relatively easy to check and replace. Read on to get your Maytag ice maker working again.
What temperature should my Maytag ice maker be?
For your Maytag ice maker to work correctly, the freezer temperature should be between 0 to 5 degrees Fahrenheit (-18 to -15 degrees Celsius). Checking and adjusting the refrigerator and/or freezer temperature may get the ice maker working again. If the temperature is too high, cleaning debris off the refrigerator condenser coils will often fix ...
Why does my ice maker hum?
The water inlet valve can become defective if the valve becomes blocked with mineral deposits, which stop the part from opening. An unusual hum coming from the refrigerator when the ice maker should be filling up with water indicates a blocked valve. If the valve is blocked, it is recommended that the valve be replaced.
What to do if ice maker switch is defective?
If the ice maker switch seems defective, test it for continuity with a multimeter to determine if it needs to be replaced.
Why does my ice maker need to be down?
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
What happens if you crack an ice tray?
If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.