| Tap Size | Drill Size |
| M14 x 2 | 15/32 |
| M16 x 1.5 | 14.7mm |
| M16 x 2 | 35/64 |
| M18 x 1.5 | 16.8mm |
| Tap size | Basic major dia (mm) | Drill size (mm) |
|---|---|---|
| M14 x 1.5 | 14mm | 12,5mm |
| M16 x 2 | 16mm | 14mm |
| M16 x 1.5 | 16mm | 14,5mm |
| M18 x 2.5 | 18mm | 15,5mm |
What is hole diameter for a M16 bolt?
11 rows · Tap Drill (mm) M4 x 0.35. 3.60. M10 x 0.75. 9.25. M16 x 1. 15.0. M24 x 1.5. 22.5.
What are the standard drill sizes?
Hex Shank Combination Drill Bits/Taps for Drills and Screwdrivers. With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic.
How to disassemble a M16?
58 rows · inch metric drill size decimal equivalent drill size decimal equivalent 0-80 3/64 .0469 54 ...
What is a bullet size of M16?
39 rows · Tap Size. Drill Size. M1.6 x 0.35. 1.25mm. M2 x 0.4. 1/16. M2.5 x 0.45. 2.05mm. M3 x 0.5 #40. ...
What size is M16 drill bit?
ISO Metric FineSize (mm)Pitch (mm)Drill (mm)M16.7515.25M16115M161.2514.75M161.514.595 more rows
What size hole do I drill for M16?
Metric threadsThreadDrill size for tapping standard metric threadsClearance holeM1210.213.5M141215.5M161417.5M1815.52020 more rows
What is the correct size of tap drill for tapping M16 thread?
Tap SizeTap SizeDrill SizeM16 x 1.514.7mmM16 x 235/64M18 x 1.516.8mmM18 x 2.515.8mm34 more rows
What size is a 16 drill?
Drill Bit Size ChartSizeDecimal EquivalentSize690.029211/64".75 mm0.029517680.0314.40 mm1/32"0.03121647 more rows
How do I know what size drill bit to use?
Check the Shank Typical drill bits have markings somewhere on the shank above the threads. It's small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
What size is M4 hole?
Use these tables for calculating the relevant size drill bit and clearance hole for ISO metric coarse and fine threads. All dimensions are in millimeters (mm)....Fine Thread.SizePitchDrillM3.50.353.15M40.353.65M40.53.5M50.354.6559 more rows•Apr 8, 2022
How do you read a tap drill chart?
0:236:17Tap and Drill Chart Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are three sections to this chart. The first outlines fastener specifications. The secondMoreThere are three sections to this chart. The first outlines fastener specifications. The second outlines required tap drill sizes. And the third outlines industry standard clearance drill sizes.
How is tap drill depth calculated?
To determine the ideal minimum drill depth, start with the basic rule: the tap drill depth should be at least one thread or one pitch beyond the chamfer of the tap. In other words, for a 1/4-20 tapped hole requiring a 3/8" (. 375") thread depth, using a two-thread bottoming chamfer with a length of .
What is clearance hole?
clearance hole (plural clearance holes) A hole through an object which is large enough to enable threads of a screw or bolt to pass through but not the head of the screw or bolt.
What is the number 16 drill bit?
What size is a #16 drill bit? Numbered drill bit gauge sizes range in ascending order from 80 (smallest) to 1 (largest). Thus, drill bit #16 is on the larger side of your standard drill set.
Do they make drill bits smaller than 1 16?
Fractional-inch drill bit sizes For Morse taper-shank drill bits, the standard continues in 1/64 inch increments up to 1¾ inch, then 1/32 inch increments up to 2¼ inch, 1/16 inch increments up to 3 inches, 1/8 inch increments up to 3¼ inches, and a single 1/4 inch increment to 3½ inches.
What is a 1/4 drill bit in MM?
Drill Bit Hole DiametersMetric SizeFractional Size7 mm.27561/48 mm.315017/649 mm.35439/3277 more rows