Receiving Helpdesk

lg washing machine reset button

by Mrs. Stacy Prosacco II Published 3 years ago Updated 2 years ago

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.
May 10, 2018

Full Answer

Is there a reset button on my LG washer?

Where is the reset button on a LG dryer?

  • Power the dryer OFF and unplug it from the electrical outlet (You can also trip the circuit breaker if that's easier).
  • Press and hold the START/PAUSE key for 5 seconds while the unit is without power.
  • Turn the breaker back on, and power on the unit.

How do I Reset my LG inverter direct drive washing machine?

If your LG washing machine won't start, try doing a hard reset on the unit. To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds.

How to unlock LG front loader washing machine?

  • Turn off the washer and unplug the appliance.
  • Locate the retaining tabs and/or screws that hold the top horizontal panel down.
  • Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
  • Put the lid back down and plug the washing machine back into the electrical outlet.

How to start a LG washing machine?

Plug In the Washer and Start a Normal Cycle

  • Plug the washing machine back in and start a normal cycle.
  • As it fills, watch for any signs of a leak. If you see water leaking from the washing machine, press the cancel button. ...
  • If it passes the leak test, start a spin cycle to test the drain.

Is there a reset button on my LG washer?

What does resetting a washing machine do? LG washing machines like most other machines in recent times come with a reset button. This feature allows you to restart the washer if there is an error code flashing in the digital display in the control panel.

How do I reset my LG automatic washing machine?

A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed. If Still Issue not resolve ..

How do you reset a washing machine?

1:243:47Washer Not Spinning - How to Reset Motor (Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe machine gives you 30 seconds to lift the lid and close. It six times and once you start liftingMoreThe machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.

How do I hard reset my LG front loader?

Unplug the appliance. Hold the power/start button down for five seconds. Then hold the play/pause button down for five seconds. Plug the machine back in and turn it on.

How do I fix error on my LG washing machine?

To fix this:Unplug the washer for 10 seconds.Plug the washer back in, and press power button. Press the spin speed button until no spin is highlighted.Once the washer is drained, restart the washing cycle process.

Why is my LG washing machine not working?

No power issues are typically caused by a tripped circuit breaker, a faulty electrical outlet, a power outage in the home, or in rare cases a unit that requires a repair.

Do washing machines have reset buttons?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.

Why is my washing machine not starting?

0:111:52Top-Load Washer Won't Start — Washing Machine TroubleshootingYouTubeStart of suggested clipEnd of suggested clipYou should first determine if the electrical outlet the appliance is plugged into is getting powerMoreYou should first determine if the electrical outlet the appliance is plugged into is getting power if not check to see if the circuit breaker has tripped.

What causes a washing machine to stop working?

1 Be sure the machine is plugged in and turned on. If necessary, check the receptacle it's plugged into for power, using a working lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2 If the receptacle seems dead, check the circuit breaker or the fuse that serves it.

Where is the fuse on a LG washing machine?

0:502:48Diagnose Front-load Washer - No Power At All - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is actually where the fuse is located. It's on a big control board that looks something likeMoreThis is actually where the fuse is located. It's on a big control board that looks something like this and the fuse is in here.

How do I force drain my LG washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

How to reset LG washer?

To complete a power reset on your LG washer, unplug the machine from its power source. Wait at least five minutes before plugging the unit's electrical cord back into the outlet. Unless there are other problems with the machine, the washing machine should reset. If it does not reset, you need to call a technician.

How long does it take to reset a washing machine?

Unplug the machine and plug it back in after five minutes to reset the machine after draining it into a bucket. If it fails to reset, contact your service technician. Advertisement.

What does it mean when a LG washer says two letter code?

LG washers have a built-in error monitoring system that helps you diagnose issues with your washer; these codes appear when this system has detected an issue. Not all the error codes displayed by the washer require you to do something, as some resolve by themselves.

Why does my washer have a LE code?

The LE code also appears if you added too much detergent or used a detergent not designed for high-efficiency washers. The wrong detergents can create more suds in the machine and cause an LE error code to appear on the control panel.

How to drain a washing machine without spin?

Unplug the machine and let it sit for 30 minutes so the suds can dissipate. After 30 minutes , plug the machine back in, press the Power button, and then press the Spin Speed button, selecting the No Spin option . To drain the machine, press the Start-Pause button. Remove the items from the washer after this has completed.

How to drain a washer?

To drain the machine, press the Start-Pause button. Remove the items from the washer after this has completed.

What does DE mean on a washer?

The letters DE indicate a door error in that the door did not lock or shut properly or won't open. Sometimes the DE comes on during or at the end of a cycle. Other issues that cause this error code include a too-full load pressing against the door, something caught in the door or the door's gasket is damaged. After completing a power reset by unplugging the washer and waiting for 5 minutes before plugging it back in, the washer should reset if it is a minor problem. If not, call a technician.

How to reset LG washing machine?

To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

How to reset a washing machine without a reset button?

Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.

How do I force drain my LG washer?

Subsequently, question is, how do I force drain my LG washer? If it is necessary to drain the water from the washer, power the machine on and press the spin speed key until no spin is selected then press start . If done correctly, 1 minute of estimated time will display on the clock, the unit will drain out the water, and the cycle will end.

Why is my washing machine filling with water?

This may be caused by a faulty inlet valve, and the machine could be filled with water while it is turned off. To fix this: Turn off the water to the unit, perform a drain only or spin only cycle to drain out any excess water, then unplug the unit until repair service is completed.

What does resetting a washing machine do?

LG washing machines like most other machines in recent times come with a reset button.

Resetting a washing machine

To reset the washing machine, you may need to unplug it from the electrical socket and turn the circuit breaker off. After a few minutes, plug the machine again into the power outlet once the circuit breaker is back on. Make sure that you keep a note of the error code that comes on the display in case you need the help of a service technician.

How do you do a factory reset on a washing machine?

After having checked all other options as to why your machine is not starting, you may need to do a factory reset or hard reset.

Why does my LG washing machine not start?

Sometimes, the LG washing machine won’t start because of the following problems: Power connection: Washing machines need a proper electrical outlet to get connected. They also need to have a power cord working properly.

How do I know if my washing machine needs replacing?

There are a few clear signs that your washing machine needs replacing.

Wrapping Up

The reset feature in the LG washing machine is a great way to get the machine started, if it doesn’t start the first time. Such a feature is especially helpful if you have limited access to service assistance or if you are the type to fix minor glitches in appliances.

About the Author

Neha is the one who is aware of current trends and best practices in our desi community. She also helps and educates people looking for a solution to their problems via online. Her work has been published on countless blogs and notable magazines.

How to reset LG washing machine?

To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

Why is my LG washing machine not working?

Beside above, why is my LG washing machine not working? This may be caused by a faulty inlet valve, and the machine could be filled with water while it is turned off. To fix this: Turn off the water to the unit, perform a drain only or spin only cycle to drain out any excess water, then unplug the unit until repair service is completed.

How to reset LG washer?

To reset, you can just unplug the washer, press the POWER/START button for five seconds, then do the same with the PLAY/PAUSE button. Plugging it back in, your LG washer should be blinking with lights, ...

Why won't my LG washer turn on after reset?

If your LG washer won’t turn on even after a reset, then bust out your multimeter and check if power is getting delivered to the machine. If that isn’t the case, then it can be any one of the many components that is failing.

How to fix LG washer that won't turn on?

To fix your LG washer if it doesn’t work after a reset, check the power source with a multimeter to see if it’s working. If the power supply is working as it should, check the noise filter and the main control board. If your LG washer still doesn’t turn on, you may need to schedule it for repair. What are the things that you should do ...

Why does my LG washer make a noise?

LG uses a noise filter to cut down on electromagnetic noise on some of their washer models . When it fails, you will hear a very loud buzzing or static sound coming from your washer, or it will not turn on at all.

What to do if your second appliance doesn't work?

If that second appliance doesn’t work, you may want to replace the receptacle. You can try this Leviton Duplex receptacle from Amazon. Or you might want to use an extension cord like this Cable Matters 2-Pack extension cord while you wait for an electrician to do the replacement for you.

What to do if your washer is busted?

If you cannot replace the busted component yourself, you can call in a repair technician as the manufacturer suggests, or consider replacing it with a new washer. Buying a new, even more expensive washer might help you save money and avoid stress in the long run.

What to do if LG washer won't power on?

LG is very direct-to-the-point on this one. If your washer won’t power on even after doing a reset, then you should have it repaired. You can go to this page to request a repair. However, the company does have a rather dismal customer service, according to reviewers on TrustPilot.

Check Power Source

When your LG washing machine won’t turn on, don’t panic. You’ll want to check your equipment and make sure the power supply is working properly. Inexperienced appliance repair workers or homeowners often try to diagnose the symptoms before checking a few basic components.

LG Washer Start Button Stuck

LG washing machine start button not working? LG’s custom support team has a trick to fix it: shut off your machine, unplug it, and try tapping or applying pressure on the areas around the start button.

Hard Reset LG Washer

Try performing a hard reset if your LG washing machine won’t start. This can be done by unplugging the unit, plugging it back in, then holding the power button/play button down on the front of the machine for 5 seconds each. If this resets your washing machine to factory settings, you may need to set your preferred cycles and options again.

Blown Thermal Fuse

LG washers come with thermal fuses installed. If the washer’s interior temperature goes beyond a certain point, the fuse will trigger to protect the machine from overheating. The protector will blow up if the machine gets too hot. This happens when the machine shuts off, like it does when you push the start button on your washer for a few seconds.

Faulty Lid Switch

LG washers have an additional safety feature that prevents the unit from turning on when the lid isn’t closed. When you open the washer door, the lid switch turns on or off according to whether it senses that the door is open or closed. That can be handy when you need to retrieve clothing from inside the tub.

Defective Control Board

An LG washer won’t start because of a few possible issues. The most common issue is that the user control board is defective and no longer provides an electronic response when pushed. If this is the issue, it may be necessary to replace the board.

Broken Timer

Your LG washer’s timer is a vital part of the washer. Without it, your washer’s cycles won’t start and you won’t be able to set a wash schedule. If your washer isn’t working, it could be due to any number of reasons. Timer problems can include a broken spring or gear, a faulty motor, or even water in the mechanism.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.17PHP Version2.24sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[12:07:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[12:07:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[12:07:42] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[12:07:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[12:07:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:07:42] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (52.22ms)
  • Application (2.18s)
  • 1 x Application (97.62%)
    2.18s
    1 x Booting (2.34%)
    52.22ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.13s
    • select * from `posts` where `published_at` <= '2025-05-06 12:07:42' and `slug` = 'lg-washing-machine-reset-button' and `posts`.`deleted_at` is null limit 1
      11.05ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-05-06 12:07:42
      • 1. lg-washing-machine-reset-button
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 127062 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      9.7msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 127062
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      840μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      1.1ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      1.28ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.1s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 39667 limit 1
      870μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 39667
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        iflF9lnBljKKGiSMfp7ZyC6buU8RV8W2ZLCqCWEO
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/lg-washing-machine-reset-button" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /lg-washing-machine-reset-button
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "3.145.86.34" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "93b6787558ee4fa4-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "3.145.86.34, 172.70.126.36" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/lg-washing-machine-reset-button" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/lg-washing-machine-reset-button" "REMOTE_PORT" => "60728" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.126.36" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "3.145.86.34" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "93b6787558ee4fa4-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "3.145.86.34, 172.70.126.36" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1746513462.7579 "REQUEST_TIME" => 1746513462 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Tue, 06 May 2025 06:37:42 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Ilh1a05PTFBDaURJWlFmOWh4a2xSRnc9PSIsInZhbHVlIjoiK2tUdkZZQWY0Y3R0T0xPdUUzR291SjJWM3FvZFRjUTlPR1A1NGQrMUVmdGhZdUZ0TjhNNHcyQzR2SVpsRTFZRFQ5bWRld2M1ZVlJREp5dDVOOWxxTTJhQW1PTytiS0FMMjRFWFMzZEV6ei8yRHcvTTRsaTJVMHdURG13OVB4dG8iLCJtYWMiOiI3MGFkNzI3ZDlmOWI0M2I3NWJhOTYxOWU3NTMyNWE4ZTRlOGVmYTZiNDUxOTFmODc4ODEyOTZjM2E2ZWRiMWEwIiwidGFnIjoiIn0%3D; expires=Tue, 06-May-2025 08:37:44 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6Ilh1a05PTFBDaURJWlFmOWh4a2xSRnc9PSIsInZhbHVlIjoiK2tUdkZZQWY0Y3R0T0xPdUUzR291SjJWM3FvZFRjUTlPR1A1NGQrMUVmdGhZdUZ0TjhNNHcyQzR2SVpsRTFZRFQ5bWRld" 1 => "askhelpdesk_session=eyJpdiI6IjJWYmp1Ni9zcC9RSk1pTlZjU01xRUE9PSIsInZhbHVlIjoib3lPRGtCVVhjajg4dEE0SGNJVG5ldENlcTdjRWhVaERGckhvUnBEU3VaVGI5TW9rcnAyZ0lLaHNZd3p0bGNnNFpHMmtJVTZLc0Rkb3VNR0FWR2ZqelNHOUlxNlBNN1ZpOTNPRXFQZGlXRDlPLzdzNGpjODZHQ2FyWEpWRThIajUiLCJtYWMiOiI1NzA1MWY4ODNjYzQ3ZDM5MWMzNTRjNmZmN2RhNjYwNzc3MjNlOWMzMTZiMjJlZTVmYzQ1NmVjOWZmMDc4OTdhIiwidGFnIjoiIn0%3D; expires=Tue, 06-May-2025 08:37:44 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6IjJWYmp1Ni9zcC9RSk1pTlZjU01xRUE9PSIsInZhbHVlIjoib3lPRGtCVVhjajg4dEE0SGNJVG5ldENlcTdjRWhVaERGckhvUnBEU3VaVGI5TW9rcnAyZ0lLaHNZd3p0bGNn" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Ilh1a05PTFBDaURJWlFmOWh4a2xSRnc9PSIsInZhbHVlIjoiK2tUdkZZQWY0Y3R0T0xPdUUzR291SjJWM3FvZFRjUTlPR1A1NGQrMUVmdGhZdUZ0TjhNNHcyQzR2SVpsRTFZRFQ5bWRld2M1ZVlJREp5dDVOOWxxTTJhQW1PTytiS0FMMjRFWFMzZEV6ei8yRHcvTTRsaTJVMHdURG13OVB4dG8iLCJtYWMiOiI3MGFkNzI3ZDlmOWI0M2I3NWJhOTYxOWU3NTMyNWE4ZTRlOGVmYTZiNDUxOTFmODc4ODEyOTZjM2E2ZWRiMWEwIiwidGFnIjoiIn0%3D; expires=Tue, 06-May-2025 08:37:44 GMT; path=/XSRF-TOKEN=eyJpdiI6Ilh1a05PTFBDaURJWlFmOWh4a2xSRnc9PSIsInZhbHVlIjoiK2tUdkZZQWY0Y3R0T0xPdUUzR291SjJWM3FvZFRjUTlPR1A1NGQrMUVmdGhZdUZ0TjhNNHcyQzR2SVpsRTFZRFQ5bWRld" 1 => "askhelpdesk_session=eyJpdiI6IjJWYmp1Ni9zcC9RSk1pTlZjU01xRUE9PSIsInZhbHVlIjoib3lPRGtCVVhjajg4dEE0SGNJVG5ldENlcTdjRWhVaERGckhvUnBEU3VaVGI5TW9rcnAyZ0lLaHNZd3p0bGNnNFpHMmtJVTZLc0Rkb3VNR0FWR2ZqelNHOUlxNlBNN1ZpOTNPRXFQZGlXRDlPLzdzNGpjODZHQ2FyWEpWRThIajUiLCJtYWMiOiI1NzA1MWY4ODNjYzQ3ZDM5MWMzNTRjNmZmN2RhNjYwNzc3MjNlOWMzMTZiMjJlZTVmYzQ1NmVjOWZmMDc4OTdhIiwidGFnIjoiIn0%3D; expires=Tue, 06-May-2025 08:37:44 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6IjJWYmp1Ni9zcC9RSk1pTlZjU01xRUE9PSIsInZhbHVlIjoib3lPRGtCVVhjajg4dEE0SGNJVG5ldENlcTdjRWhVaERGckhvUnBEU3VaVGI5TW9rcnAyZ0lLaHNZd3p0bGNn" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "iflF9lnBljKKGiSMfp7ZyC6buU8RV8W2ZLCqCWEO" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/lg-washing-machine-reset-button" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]