If your Lasko heater is blowing cold air instead of warm air, be sure the first problem is in the thermostat. Sometimes the wrong setting of the thermostat, the defective or damaged battery of the thermostat will occur this problem Also, if there is any loose wiring inside the thermostat, it stops working properly.
Can I use my Lasko heater as a fan?
Some of our Lasko heaters have a FAN function which gives you the option to use your heater as a fan. If your heater has this feature make sure the setting is in the HEAT mode. Your heating element could be damaged or defective.
Why is my Lasko space heater too hot?
If other space heater repair tips haven't worked, the unit may be too hot. Lasko heaters have automatic shutoff devices to prevent the heaters from overheating and posing a fire hazard. To reset the heater, you need to leave it off for at least 10 minutes for it to cool down.
How does the ionizer work on a Lasko heater?
The built-in Ionizer in a Lasko heater generates millions of negative ions and disperses them into the air to combat and dispel air pollution. As the negative ion levels grow, the air feels naturally fresher like the great outdoors. How does the timer function on my Lasko heater work?
What is the warranty on my Lasko heater?
All Lasko heaters have a limited three year warranty with proof of purchase. Please refer to your user manual or our Warranty page for detailed information regarding the warranty of your product. Is my Lasko heater safe to use?
Why is my portable heater blowing cold air?
More often than not, electric heaters blow cold air when its filters are clogged, and that's why it's the first thing you should check. Start by turning your heater off and inspecting the filters. If the filters are caked with dust, then it's likely the culprit behind your heater's malfunction.
How do I fix my fan heater blowing cold air?
The problem may be as simple as that it's not set hot enough. Check or replace the batteries inside the thermostat. Not all thermostats use batteries, but those that do depend on them to work. Adjust the fan switch; try setting it to auto – it may not be in the heating cycle.
How do I reset my Lasko heater?
To reset a Lasko heater, please make sure the unit is powered off, unplugged from the wall and leave it that way for 10-15 minutes. After that time elapses, please plug the unit back into another outlet, ideally in another room to see if that resolves the issue.
Why is my electric fire only blowing out cold air?
An electric heater that blows cold air could be caused by one or more of the following reasons: The manual reset has tripped. The fan switch is “on” and the thermostat setting is below the actual temperature. The fan is dispersing this air after shutdown.
Why is my heater not blowing very hot?
Troubleshooting Furnaces Not Blowing Hot Air Check batteries of your thermostat and replace the drained or faulty one. Check the fan settings on your thermostat if they are set to “auto” instead of “on”. Make sure someone else has not set your thermostat to a lower temperature.
Where is the reset button on my heater?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
How do you troubleshoot a Lasko heater?
Step 1: Make Sure It's Plugged In. Make sure that the ceramic heater is plugged into the electrical outlet fully. ... Step 2: Test the Outlet. ... Step 3: Check the Circuit Breaker. ... Step 4: Review the Temperature Setting. ... Step 5: Let It Cool Down. ... Step 6: Clean the Heater. ... Step 7: Contact Lasko for Assistance.
Why is my Lasko not working?
The fan may not be working because it has been overused and has overheated. Try unplugging the fan for at least 15 minutes, and then plug in the fan again. When you do this, make sure the fan is OFF while it is resting. Also, make sure you turn the fan to ON after plugging it back in.
Do Lasko heaters have fuses?
Without a functioning fuse, a Lasko CD08200 space heater will not be able to operate safely because it will have no safety mechanism to stop the current flow and prevent overpowering the device.
How much electricity does a Lasko heater use?
Lasko heaters can use up to 12.5 amps of electricity. The average circuit breaker used in a residence is a 15 or 20 amp breaker. If you are using other appliances in the same circuit breaker as your Lasko heater, you may surpass the maximum amount of wattage available which will cause your circuit breaker to trip.
How many watts does a Lasko heater use?
All Lasko heaters have a maximum heat output of 1500 watts (12.5 amps). Most Lasko heaters have a low heat setting (750/900 watts) and a thermostat function. The cost will vary depending on the heat setting selected and how often the heater is used.
How to connect Lasko to phone?
Open the Lasko Connect app on your smart phone or mobile device and make sure the Bluetooth setting is enabled. Then, press and hold the Bluetooth button on your Lasko product. Once the lights begin to blink on your product, look at your phone and press the button to connect the two devices.
How to contact a humidifier that is leaking?
If the leaking continues contact the Customer Service team for further assistance at 1-800-233-0268 for further assistance. They are available Monday through Friday, 8am-5pm ET. Base– Check water level in base. If your unit does not have a water jug you need to monitor how much water is put into your humidifier.
Can you control Lasko Bluetooth?
No, it can not. When your Lasko Connect app is currently showing the “Controls” screen for a product, only that product can be controlled by that mobile device. Multiple users can control Lasko Bluetooth products, but only one mobile device can change the product’s settings at any one time.
Does Lasko Connect work with Bluetooth?
Yes, Lasko Connect utilizes BLE (Bluetooth Low Energy) technology, which allows for small amounts of information to be transferred at a time. This uses considerably less power and requires less time to exchange data, so your smartphone can continue to communicate with other Bluetooth devices.
Can you use a Lasko window fan when it rains?
All Lasko window fans have an enclosed motor which will allow you to use your fan safely when it is raining. However, we advise that you remove your product from the window during heavy inclement weather as powerful winds could blow water into your electrical components.
How long does it take for a Lasko heater to cool down?
To reset the heater, you need to leave it off for at least 10 minutes for it to cool down. Move the Lasko heater to a location with plenty of space around it to facilitate adequate air circulation.
Why is my Lasko heater fan not working?
If your Lasko space heater fan doesn't work, it's possible the heater's ceramic element has failed, or there may be another problem. In either case, Lasko prescribes a few troubleshooting techniques that you can perform at home.
What happens if the temperature in the room matches or exceeds the preset temperature on the space heater's thermostat
If the temperature in the room matches or exceeds the preset temperature on the space heater's thermostat, the Lasko heater will not turn on until the room cools down. Raise the heater's temperature setting and the Lasko heating element should engage again. Advertisement.
What happens if the pilot light goes out on a furnace?
To heat the fuel, your furnace has a pilot light. If the pilot light goes out, your heating will start blowing cold air.
Why does my furnace shut off?
If there’s a problem with your gas line , your furnace might shut itself off for safety reasons. However, the blower might continue running, which would lead to your heating blowing cold air.