How to Remove a Kwikset Laurel Door Knob
- Loosen the outer ring. Locate the depression or lip along the perimeter of the outer ring. ...
- Grab the knob handles on both sides of the door and simultaneously turn both handles clockwise. Release the handles.
- Loosen both screws on the inside of the knob mechanism. ...
- Unscrew the latch from the side of the door. ...
Full Answer
How to replace door knobs with Kwikset levers?
How to remove an old door knob
- Use a drill or screwdriver to remove screws on the door jamb side of the door. Remove plate.
- There should be screws on one side of the knob. ...
- If your new knob is smaller, you might need to sand or touch up paint behind where the old knob used to be.
- Remove the old strike plate on the doorjamb.
How do I unlock a locked Kwikset bathroom door?
Kwikset Interior Door Emergency Key Pack of 5
- Make sure this fits by entering your model number.
- For use in Kwikset-brand interior/privacy locksets. Made by Kwikset.
- 1 set includes 5 keys
- Conveniently stores above door for ease of use
- Use to unlock the door when it's locked from the inside
- Fits standard interior door locks.
How to rekey a Kwikset doorlock or deadbolt?
The Pros
- The Kwikset Smart Key design uses wafers to interact with a sidebar. This design protects lockpicking and key bumping.
- The ability to rekey a Smart Key Lock without disassembly is a major convenience.
- You can accomplish rekeying without the need for a locksmith
How to rekey and reset a Kwikset SmartKey?
With the Kwikset Smart Key, you can rekey your locks, even without a good key, right in the door, in just 15 seconds.If rekeying the lock while still on the ...
How do I remove a Kwikset door knob?
1:193:22Remove kwikset interior door knob with no screws - DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust like that and carefully pull the locking ring off and as you pull this out this inner portionMoreJust like that and carefully pull the locking ring off and as you pull this out this inner portion here as well as these screws. Go through their respective holes. So carefully pull this out.
How do you remove a door knob with hidden screws and no latch?
0:091:07How to Replace Door Knob With No Screw?! EASY! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little slot take your flat-head screwdriver. And just pop it off. Once you remove theMoreThere's a little slot take your flat-head screwdriver. And just pop it off. Once you remove the plate you'll have to take your drill and remove these two screws in the back to remove the handle.
How do you remove a screwless door knob?
0:001:00How to Remove a Door Knob with No Visible Screws - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere should be a slot and the base of the trim plate where you can stick the screwdriver tip. AndMoreThere should be a slot and the base of the trim plate where you can stick the screwdriver tip. And pry out the trim. Now you can remove the. Screws.
How do you remove a Kwikset lever?
1:079:48How to Replace an Old Entry Door Handle with a Kwikset Smartkey ...YouTubeStart of suggested clipEnd of suggested clipItself just need to unscrew. Those i'm using a drill because it's a little bit faster you of courseMoreItself just need to unscrew. Those i'm using a drill because it's a little bit faster you of course can use a normal hand screwdriver if you like.
How do I remove a door knob from a passage?
Remove Your Door Knob Locate the hole underneath the doorknob shaft. You should see a tiny slot or hole. Push the tip of a narrow screwdriver into the hole. Tug on the knob and it will slide right off.
How do you remove a deadbolt that has no screws?
0:223:47Remove BRINKS Deadbolt with hidden screws - FAST & EASY!YouTubeStart of suggested clipEnd of suggested clipFrom here you just have to pull this actual handle off with equal pressure you want to pull thisMoreFrom here you just have to pull this actual handle off with equal pressure you want to pull this knob off and I may need both hands. And just by wiggling it.
Step 1
Open the door so that you have access to front and back of the door you are removing the Kwikset door knob from. Remove the two screws on the inside door knob faceplate using a Phillips-head screwdriver. The screws secure the knobs together to the door.
Step 2
Simultaneously pull both sides of the door knob away from and off the door.
Step 3
Remove the screws that secure the latch plate to the edge of the door using the Phillips-head screwdriver. Insert a flathead screwdriver between the latch plate and the door to pry the latch assembly out of the door. Pull the assembly out of the door using your fingers.
Step 4
Locate and remove the screws that secure the strike plate to the door jamb using the Phillips-head screwdriver. Remove the strike plate from the door jamb.
Step 1
Locate a small hole on the knob sleeve between the back of the knob and the face of the door.
Step 3
Insert the paperclip into the hole until you feel some resistance. The resistance is the locking pin holding the door knob to the stem. Press the paperclip down, pressing in on the locking pin. Pull the door knob away from the stem.
How to remove Kwikset door knob?
To remove only the Kwikset door knob, look for a tiny hole in the sleeve of the knob -- it should be located between the knob's rear side and the door's face. Push a straightened paperclip into the hole until some resistance is felt. Now, press the piece of metal in a downward direction. This presses the locking pin.
How to remove a latch plate from a door?
To detach the latch plate, undo its screws. Then, push in a screwdriver with a flat head between the door and the latch plate, and work it to remove the latter. Grip the assembly with your hands, and pull it away from the door. Next, identify the two screws that hold the strike plate and the door jamb together.
What is a Kwikset door knob?
Kwikset is a manufacturer of door hardware, part of the Black & Decker Hardware and Home Improvement Group. Kwikset's Laurel line of doorknobs is sold in most hardware stores and is available in a variety of styles. Should you need to remove a Kwikset Laurel knob, you can accomplish the task in just a few short steps. Advertisement.
How to remove a door ring?
Locate the depression or lip along the perimeter of the outer ring. Insert the head of a flathead screwdriver between the door and the lip and gently push the outer ring outward. Locate the arrow-shaped tab underneath the right side of the outer ring and push the tab downward with the head of the screwdriver.
How to get door knob back in place?
Hold the doorknob as tight against the interior mechanism as possible and slip your flathead screwdriver beneath the lever. Push the lever in the opposite direction from what you used to remove the knob. Slide it all the way until it can't go any farther. At this point the doorknob should be locked back in place.
How to open a door with a broken knob?
Likewise, how do you open a door that has a broken knob? Exposed Screws Grab the broken knob and pull it from the door. Depending on the manufacturer, the spindle may pull from the latch or slide off the spindle. Use the screwdriver to push the opposite side of the doorknob from the door and latch. Pull the spindle from the center ...
How to replace a broken spindle on a door knob?
Use a simple procedure to replace a broken spindle. Open the door part way. Locate the small setscrews or hex bolts at the inner portion of each door knob. Pull out both sections of the broken spindle from the door lock. Fit one end of the new spindle fully into the square port at the inner end of a door knob.
Where is the spindle on a door knob?
The spindle locates into the square holes found at the back of a set of door handles or door knobs.
How to make sure your door is locked?
Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise.
How to use a key on a lock?
Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise.
How to re-key your SmartKey Security™ locks?
If you have a deadbolt, make sure it is in the locked potion. If you have a knob or lever, make sure it is in the locked position. Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise. Insert the SmartKey tool fully and firmly into the SmartKey hole. You may feel the tool click inside the lock. Remove the SmarKey tool. Remove the current key. Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise. Pull the key to make sure it will NOT come out in this position. Rotate the key 90 degrees counter-clockwise, back to the starting position. Remove your new key. You have successfully re-keyed your lock. Video How to Re-Key Your SmartKey Lock
How to program a symlink keypad?
1. Open the door. 2. Remove battery cover. 3. Press the program button once. 4. Enter new user code. 5. Press lock button. 6. If programming is successful the keypad will flash green once, and you will hear one beep.
My key won't rotate with the key used during re-keying, what should I do?
If your cylinder will not rotate with the key used during re-keying, your cylinder has become misprogrammed. A common reason for misprogramming is that they key was not fully inserted during re-keying. Another common reason is that they key was accidentally pulled while rotating to the home position.
My key pulls out in any directions after re-keying
If your key pulls out in any direction, please call Kwikset Consumer Service: 1-800-327-5625