Kenmore Series 100 Washer Owners Manual If your washing machine does not drain the waste water, the waste hose might be clogged. If the waste hose is only clogged, repair is as easy as removing and unclogging the waste hose. To remove and unclog the waste hose, follow the instructions in the waste hose installation guide.
Full Answer
How do I Reset my Kenmore 100 series washer?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do I troubleshoot my Kenmore washer?
- Look for the "Pause/Cancel" button on the washer control panel.
- Press the "Pause/Cancel" button twice to cancel the wash cycle.
- Check for kinks in the water supply hose while the washer does not have power.
How to fix Kenmore washer?
Kenmore HE Washer Stuck On Sensing [SOLVED] – Let’s Fix It
- Faulty Water Inlet valve. Enough water at the right temperature is a key factor in cleaning your clothes. ...
- Defective Motor Shift Actuator. Top-load Kenmore washing machines use a motor shift actuator to switch between the WASH and SPIN cycles.
- Control Board Failure. Along with the washer shift actuator failure, there is a major problem that can occur. ...
How to repair a Kenmore washing machine?
Some things that make a difference in the repair bill for your machine include:
- Brand. The brand of your washing machine influences the repair costs and whether it makes more sense to repair or replace. ...
- Type of washer. The type of washer is another factor that directly impacts repair costs. ...
- Availability of parts. ...
- Access to your appliance. ...
- Gas vs electric. ...
- If plumbing is needed. ...
- Cost of appliance repair service. ...
- Your flexibility. ...
How do you reset a Kenmore 100 Series washer?
1:023:47Washer Not Spinning - How to Reset Motor (Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe machine gives you 30 seconds to lift the lid and close. It six times and once you start liftingMoreThe machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.
Why won't my Kenmore washer spin and drain?
0:086:44Washer Won't Drain or Spin: Troubleshooting VMW and Direct ...YouTubeStart of suggested clipEnd of suggested clipTurn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end ofMoreTurn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end of the hose. Sometimes lint or debris can build up in this area and prevent draining.
Why is my Kenmore washing machine stuck on sensing?
When a Kenmore HE washer malfunctions, the load sensing feature may become stuck on. This is usually caused by a defective load sensor that misreads its surroundings or a broken power cord that prevents it from measuring the load within the machine.
How do you reset a Kenmore washing machine?
How to Reset a Kenmore Elite HE WasherPress the "Stop" button twice, and then press the "Power" button. Video of the Day. ... Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").Press the "Start" button to complete the reset process and restart the washing machine.
What would cause a washer to not spin or drain?
If the washer won't drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken.
How do you fix a washing machine that will not spin or drain?
What to Do When Your Washing Machine Won't DrainPerform a Master Reset. Unplug your washer for about one minute. ... Test the Lid Switch Assembly. ... See if the Drain Hose is Kinked. ... Check the Drain Hose or Pump for Clogs. ... Clean out the Coin Trap. ... Check the Water Level Control. ... Schedule Washing Machine Repair.
How do I know if my washing machine sensor is bad?
3:258:10Top Loading Washing Machine Load Sensor Troubleshooting and ...YouTubeStart of suggested clipEnd of suggested clipThis hose below on the end of it and see if there's any obstructions. If there is not an obstructionMoreThis hose below on the end of it and see if there's any obstructions. If there is not an obstruction in that and you're reading 120 volts on the other on all the measurements you may have a bad timer.
What to do if my washer is stuck on sensing?
Reset the washer First, try to cut off power to the machine for a few minutes (about 3-5 minutes) then reconnect it to power and see if it will behave. Quick Tip: Every so often, leaving the washer unplugged for longer (you can even leave it unplugged for 15-20 minutes) does the magic.
How do you run a diagnostic test on a Kenmore washer?
3 AnswersWith the washer empty, close the door.Push “control/on” or “Start”Select “Drain/Spin”Select “No Spin” by pressing SPIN SPEED touchpad.Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)C:00 should light up and begin the diagnostic.
What are common problems with washing machines?
10 Most Common Washing Machine ProblemsIt Bounces Around. ... It's Noisy. ... Clothes Are Getting Ripped. ... Improper Or Slow Draining. ... My Washing Machine Won't Spin. ... There's No Water. ... The Door Won't Open. ... It's Smelly.More items...
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.
How do you do a factory reset on a washing machine?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.