FIX : Unplug the washer. Lift the top panel of the washer to access the lid lock/switch assembly. Try to manually unlock the washer lid without breaking the lid lock/switch assembly and the lock strike.
How do I troubleshoot my Kenmore washer?
- Look for the "Pause/Cancel" button on the washer control panel.
- Press the "Pause/Cancel" button twice to cancel the wash cycle.
- Check for kinks in the water supply hose while the washer does not have power.
How to fix Kenmore washer?
Kenmore HE Washer Stuck On Sensing [SOLVED] – Let’s Fix It
- Faulty Water Inlet valve. Enough water at the right temperature is a key factor in cleaning your clothes. ...
- Defective Motor Shift Actuator. Top-load Kenmore washing machines use a motor shift actuator to switch between the WASH and SPIN cycles.
- Control Board Failure. Along with the washer shift actuator failure, there is a major problem that can occur. ...
Why did my Kenmore front load washer stop working?
Troubleshooting a Kenmore Washing Machine Whose Spin Cycle Is Not Working
- Check Spin Speed. Your Kenmore washer automatically chooses a spin speed based on the cycle that you select, but you can change the preset speeds if necessary.
- Check for Jammed Basket. Your washer can fail to spin if the clothes basket becomes jammed because small items are caught between it and the tub.
- Adjust Load. ...
- Use Proper Detergent. ...
How to unlock door on Kenmore front load washer?
Troubleshooting A Kenmore Washer With A Locked Lid
- Before you do anything, unplug the machine and put on protective gloves. ...
- Start by taking a closer look at the latch of the door. ...
- Inspect the latch. ...
- The next thing you will need to do is check your door lock and switch assembly. ...
- Next, grab a multimeter and check both of the switches. ...
- Grab a flashlight and get an even closer inspection of the lock itself. ...
How do I reset my Kenmore high efficiency top load washer?
If you have started a load in your Kenmore Elite HE washer and need to reset it, simply press several buttons on the control panel.Press the "Stop" button twice, and then press the "Power" button. ... Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").More items...
Why is my Kenmore top load washer not spinning?
If the clutch is worn out, it may prevent the tub from spinning. If the clutch band kit is worn out, replace it. The drive pulley connects to the washer drum and works with the drive belt and motor to rotate the drum. If the drive pulley is worn out, the drive belt might slip off, preventing the washer from spinning.
Why won't my Kenmore washer spin and drain?
0:086:44Washer Won't Drain or Spin: Troubleshooting VMW and Direct ...YouTubeStart of suggested clipEnd of suggested clipTurn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end ofMoreTurn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end of the hose. Sometimes lint or debris can build up in this area and prevent draining.
How do I run a diagnostic test on my Kenmore washer?
3 AnswersWith the washer empty, close the door.Push “control/on” or “Start”Select “Drain/Spin”Select “No Spin” by pressing SPIN SPEED touchpad.Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)C:00 should light up and begin the diagnostic.
How do you reset a Kenmore washer that won't spin?
1:173:47Washer Not Spinning - How to Reset Motor (Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe machine gives you 30 seconds to lift the lid and close. It six times and once you start liftingMoreThe machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.
What causes the washing machine not to spin?
An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. (This happens most often when washing large and heavy items like comforters or heavy coats.)
How do you fix a washing machine that will not spin or drain?
What to Do When Your Washing Machine Won't DrainPerform a Master Reset. Unplug your washer for about one minute. ... Test the Lid Switch Assembly. ... See if the Drain Hose is Kinked. ... Check the Drain Hose or Pump for Clogs. ... Clean out the Coin Trap. ... Check the Water Level Control. ... Schedule Washing Machine Repair.What to Do When Your Washing Machine Won't Drain - Mr. Appliancehttps://www.mrappliance.com › blog › october › what-to-...https://www.mrappliance.com › blog › october › what-to-...
How do I force my Kenmore washer to drain?
Squeeze the locking pin on the end of the drain hose that is connected to the back of the washer if you will be draining the water into a floor drain. Pull the hose away from the washer to disconnect it. The water will pour out as soon as the hose is disconnected.How to Manually Drain Water From a Kenmore Washing Machine - Hunkerhttps://www.hunker.com › how-to-manually-drain-water-f...https://www.hunker.com › how-to-manually-drain-water-f...
Why is washer not draining after wash cycle?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.10 Steps to Drain Water Out of a Washing Machinehttps://www.ahs.com › home-matters › quick-tips › steps-t...https://www.ahs.com › home-matters › quick-tips › steps-t...
Where is the drive belt on a Kenmore washer?
0:223:16Kenmore Washer Repair – How to replace the Drive Belt - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust away from the cabinet. And untuck it from the top access panel set the whole family. And how ifMoreJust away from the cabinet. And untuck it from the top access panel set the whole family. And how if your existing belt is still on the washer.
How do you spin a Kenmore washer?
7 Answers from these members:TURN THE POWER BUTTON ON, PUSH THE SPIN SPEED BUTTON NEXT TO DESIRED LEVEL, THEN PRESS START, THERE YOU GO , IT WILL ONLY SPIN, NOT RINSE AND SPIN - Worked for me on my Kenmore Elite. ... I have a Kenmore series 600 top loader that has been nothing but problems since day.More items...•
How do you fix a Kenmore washer that is off balance?
3:0311:56Kenmore Top Load Washer Getting out of Balance (W10780048)YouTubeStart of suggested clipEnd of suggested clipBe you know won't be bent or nothing like that. But yeah once you get those things in you set itMoreBe you know won't be bent or nothing like that. But yeah once you get those things in you set it down and you can go ahead and replace these little bushings. Comes with new ones.
Why won't my Kenmore washer spin?
Your Kenmore washer will not spin if the lid switch is faulty. This is a safety feature, to prevent accidents when somebody wants to stick his hand while washer is spinning. To check this you’ll use a multimeter to check for continuity in the switch. If there is none, replace the switch.
What is a coin trap on a Kenmore washer?
Coin Trap or Filter. Some Kenmore washers feature coin traps to catch small objects before they reach the pump. This part needs to be clean and free of debris to ensure your washer is draining correctly. Simply remove the trap and thoroughly clean it.
Why is my washer loud?
Drive Pulley. When the drive pulley becomes cracked, bent, loose, or worn out it can make your washer loud. You’ll need to remove it from the machine and inspect it. If you notice that it’s defective or damaged, it will need to be replaced.
Why is my washer making a loud noise?
Clutch. Aside from making the washer not spin, a failing clutch can also make the machine loud during or just after the spin cycle. A failing clutch will make grinding metal to metal noise. Again, this part cannot be fixed, so you’ll need to repair it.
Why is my drain pump loud?
If the loud noise is occurring while your machine is draining, it’s probably the drain pump. This can mean it’s either clogged or faulty. To determine if this is your problem you’ll need to access the drain pump and clear it of all debris. If the pump is free from debris but still noisy, you’ll need to replace it.
Why is it important to replace shock absorbers on a washer?
They are important as they prevent the washer from shaking and vibrating. Locate the shock absorbers on your machine and check them for damage. If you find that one is damaged, replace it. Also keep in mind that when you replace one you should consider replacing them all to ensure they get equal wear.
What is top load machine?
Motor Coupling (top load machine) The motor coupling connects your washer’s motor to the transmission . When the washer is overloaded, the coupling will fail on purpose to protect the motor and transmission. It can also fail from normal use over time, if you find that it’s broken you’ll need to replace it.
Why is my washing machine not stopping?
Bad lid switch. If your washing machine does not stop every time you open the lid, your lid switch is bad. You may have to replace the lid switch. Clogged waste hose. If your washing machine does not drain the waste water, the waste hose might be clogged.
What happens if a drain hose is clogged?
If the waste hose is only clogged, repair is as easy as removing and unclogging the waste hose. If the waste hose has no clogs, the problem may be a bad drain pump. The drain pump could have a clog in it, too. Since the drain pump has a translucent cover, the clog should be visible.
What is Kenmore washer?
Kenmore washer troubleshooting. The Kenmore brand name is used by Sears Holdings Corporation for a variety of household appliances sold in its stores. The brand’s history is rather long: it first appeared in 1913. Sears commissions well-known manufacturers, including Whirlpool, LG, Electrolux, and Daewoo Electronics to make products ...
How to reduce noise in washer?
Noise and vibration may be reduced by placing a piece of 3/4" (19.1 mm) plywood underneath your washer. The plywood may extend underneath both washer and dryer to keep them at equal heights.
How many feet of washer should be on a pedestal?
All four feet of the washer must be in firm contact with the floor. If the washer is on a pedestal, the washer must be secured to the pedestal and all four pedestal feet must be in firm contact with the floor.
What happens if you reverse the hot and cold water hoses?
If the hot and cold water inlet hoses are reversed, the washer will display an "HC" error code at the end of the cycle. A hot rinse followed by spin will cause wrinkling.
Why does my washer make a noise when it drains?
This happens during the end of draining. It is normal. When the cycle changes from washing to draining or spinning, you may hear a noise as the drive system shifts.
How to get rid of suds in washer?
Follow detergent manufacturer's directions. If you have very soft water, you might need to use less detergent. Selecting a Fabric Softener or 2nd Rinse option will help flush excess suds from your washer.
How many clothes can you add to a load after the cycle starts?
Once the load is wet, there may appear to be space for more items. Do not add more than 1 or 2 garments after the cycle has started. For best results determine load size with dry items only. Washer continues to fill or drain, or the cycle seems stuck.
What is a Kenmore washer?
Kenmore washer series is a reputed washing machine series that has saved the working class from the needs of laundromats and will help you clean your laundry in a very efficient way.
What happens if the Kenmore washer door is not closed?
Kenmore series washer is designed in a way that if the door is not closed it will not start working and you have to make sure that the doors are properly closed and no garment is blocking their way. If there is any blockage remove it, properly close it and then reset the machine to begin the washing action again.
What is a Kenmore Series 500 washer?
Kenmore Series 500 Washer Troubleshooting. A washing machine is the most critical yet most lightly taken consumer goods that is a must part of every household and it is no surprise that we all are not concerned about the importance of these washing machines in our daily life not until these machines stop working and cause a problem in cleaning laundry.
1. Too much suds?
It might not be a leak at all. You could have a simple case of “Bobby Brady Syndrome” — adding too much detergent, creating a sudsy mess. Make sure you’re using HE (high-efficiency) detergent and the proper amount for the size of the load you’re running.
2. Are the hoses installed properly?
Check them to make sure they’re secure. If those things check out and you’ve still got water leaking when the machine isn’t running, turn off the water and call the pros at Sears Home Services.
1. Did you overload?
Unbalanced loads can cause vibration or thumping. Space out your loads — it might be as simple as that.
2. Is it level?
Are all four feet of your washer on the floor? Are the legs properly installed? If they are, see if your dryer is making the same sort of noise. If it is, your floor could very well be the issue. Try this: Place a piece of ¾-inch plywood underneath both the washer and dryer to create a level surface.
2. Are the hot and cold faucets on?
A Helpful Hannah in your household might have turned them off and forgotten to tell you.
3. Are the screens clogged?
Wait, what screens? Many people don’t know there are screens on the back of the machine where the hot and cold water hoses connect. Turn the water off, unhook the hoses and clean any debris or residue that may have built up there. Then reinstall the hoses.
1. Are you using the detergent dispenser?
Always use it when adding detergent. If your machine doesn’t have one built in, add the measured amount of detergent before adding the laundry load.