Receiving Helpdesk

is there a reset button on a refrigerator compressor

by Winston Homenick IV Published 3 years ago Updated 2 years ago

Is there a reset button on a refrigerator compressor?

  • Locate the refrigerator power cord on the back of the appliance.
  • Disconnect the power cord from the wall outlet.
  • Turn both the fridge and freezer controls to "Off" or "0" inside the fridge.
  • Adjust the fridge and freezer controls to the desired setting.
  • Allow the fridge up to one day to adjust to a stable temperature.

Some refrigerators have a reset button, and you can use it to restore the refrigerator to its original factory settings. However, if a refrigerator doesn't have a reset button, you can unplug it from the power outlet for a few minutes. Then, when you plug it back in, the problem should get fixed.Sep 24, 2021

Full Answer

Is it worth replacing a compressor on a refrigerator?

Usually, by the time a compressor fails, the refrigerator is relatively old and could be prone to other issues, making it not worth the cost of repairing vs investing that money into a new refrigerator. If your refrigerator is still relatively new, it might be worth replacing your compressor instead of buying a new refrigerator.

How do you replace a refrigerator compressor?

Remove the Old Compressor

  1. Empty the Fridge. Clean out the fridge. Take everything out of the fridge and put it into coolers with ice packs. ...
  2. Move the Unit. Pull the fridge out. You have to access the back of the fridge in order to work on the compressor. ...
  3. Take Off the Guard Plate. Remove the guard. ...
  4. Remove the Compressor. Find and remove the compressor. ...
  5. Photograph. Take pictures. ...

Is there a way to Reset my Refrigerator?

How to Reset a Norcold Refrigerator

  1. Open the door of the refrigerator. Check for the control panel, where this will be located depends on your refrigerator’s model. ...
  2. You will find the “on/off” button on the control panel. Press and hold it for about three seconds. ...
  3. Wait for some minutes, 3-5 minutes would do. Next, press and hold the “on/off” button again to switch the refrigerator back on.

Does My Refrigerator have a reset button?

How to Reset the Temperature of a KitchenAid Refrigerator

  1. Unplug the refrigerator from the power source and leave it that way for a number of minutes.
  2. Turn off the freezer and fridge controls to 0 or ‘Off’. The controls are located inside the refrigerator.
  3. Plug it back into the power source again. ...
  4. Give the refrigerator’s temperature time, at least 24 hours, to stabilize. ...

How do you reset the compressor on a refrigerator?

4 steps to reset a refrigerator compressorUnplug your refrigerator. ... Turn off the refrigerator and freezer from the control panel. ... Reset your freezer and fridge temperature settings. ... Wait for the refrigerator temperature to stabilize.Jun 15, 2021

How long does it take for a refrigerator compressor to reset?

around 24 hoursYour part is now finished, but it'll take around 24 hours for the temperature in your fridge to stabilize. Be patient when waiting to see if it'll work, and keep the refrigerator door closed so that it can cool as quickly as possible.Sep 28, 2021

What causes a refrigerator compressor to stop working?

Without a regular cleaning, the coils can become clogged with dirt and dust. This prevents the efficient transfer of heat from the refrigerant to the air, causing the compressor to work harder and fail prematurely.

Where is reset button on fridge?

It is usually in the middle of the back panel or at the top of the refrigerator in a panel above the upper shelf. Make small changes in the temperature or you may run the risk of freezing the contents of the fridge.

How do I reset my air compressor?

0:000:55Foxtons - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd maybe other brands as well is a it has a hidden thermal reset button that if the the motorMoreAnd maybe other brands as well is a it has a hidden thermal reset button that if the the motor overheats is going to pop out and will stop you turning it on because.

How can you tell if refrigerator compressor is not working?

The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it's likely there could be a problem with the compressor.

What is the most common cause of compressor failure?

Low Refrigerant Levels — Low refrigerant levels are typically caused by leaks in the refrigerant lines. Low refrigerant levels make the compressor work hard just to pump enough refrigerant through the AC unit, which, as you may have guessed, can lead to compressor failure.Mar 19, 2020

What is the first thing to check when refrigerator stops working?

If Your Fridge Has Stopped and the Light is Off As obvious as this sounds, often a fridge shuts down completely because it's simply getting no power. The first thing to check is the breaker (in your home's electrical service panel) of the circuit serving the fridge.

How do you test a refrigerator compressor?

Move the fridge away from the wall and unplug it from the wall socket. You're going to need a digital multi-meter for this – using the ohms function. Having electricity applied to the circuit under test will give you false readings and damage your multi meter, so unplug entirely.

How do I reset my freezer compressor?

How to Reset the Compressor on a FridgeLocate the refrigerator power cord on the back of the appliance.Disconnect the power cord from the wall outlet. ... Turn both the fridge and freezer controls to "Off" or "0" inside the fridge. ... Adjust the fridge and freezer controls to the desired setting.More items...

Why is my refrigerator running but not cooling?

The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.Sep 1, 2021

What is wrong with a refrigerator that is not cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won't have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it's stuck.Feb 10, 2022

What does a compressor do in a refrigerator?

Your refrigerator compressor makes use of a low-pressure, gaseous refrigerant that helps keep your food cold. If you adjust the thermostat of your fridge for more cold air, your refrigerator compressor kicks in, causing the refrigerant to move through the cooling fans. It also helps the fans to push cool air into your freezer compartments.

What to do if your refrigerator is not defrosting?

Resetting your refrigerator compressor is a useful option for anyone looking to defrost their machine or adjust its temperature. A reset can also sometimes resolve other internal issues, like malfunctioning timer cycles, so it's one of the first things you should try if your refrigerator seems to be having issues.

How to turn off a refrigerator after unplugging?

After unplugging the refrigerator, turn off the fridge and freezer using the control panel inside the fridge. To do so, set the controls to “zero" or switch them off entirely. Once you're done, you can plug your refrigerator back into the wall socket.

How hot should my refrigerator be?

Those controls vary depending on the make and model of your fridge, but experts recommend keeping your refrigerator around 40 degrees Fahrenheit. For a fridge and freezer with settings 1–10, that's typically around level 4 or 5.

Why does my refrigerator make a loud humming noise?

Your refrigerator compressor is responsible for that humming sound. So, if the sound stops for good, or if the sound goes from faint to a constant or very loud humming noise that does not shut off , it may be a sign the compressor is broken or malfunctioning.

How to tell if compressor is failing?

One of the signs that a compressor is failing is that it runs continuously without the refrigerator and freezer compartments reaching their proper operating temperatures. This condition may be the result of a loss of refrigerant in the system, or the compressor's valves may be failing.

How long does it take to reset a Maytag refrigerator?

Most don't automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

Where is the power cord on a refrigerator?

Locate the refrigerator power cord on the back of the appliance.

Does a refrigerator reset?

There is no reset button on a refrigerator,but there are many things that can keep it from cooling. There is not a reset button on most models of refrigerators.

How to reset a refrigerator?

Step 1: The first and most simple step is to find the power cord of the refrigerator which if found at the back of the appliance. For almost all devices, the power cord is located at the back of the product. Step 2:

What is a compressor in a refrigerator?

A fridge compressor makes use of a low-pressure gaseous refrigerant. When more cold air is required by the fridge thermostat, the compressor kicks in making the refrigerant reach a high pressure, moving it through cooling coils as the fridge’s fans send cool air into the freezer and fridge compartments.

Why do compressors shut off?

This feature of a compressor allows it to shut off at very high temperatures, to prevent overheating. Hence, reducing chances of damage through overheating. 2. Sealing: The sealing feature of compressors ensure that no route is provided to the gas to leak off the fridge system.

How many types of compressors are there in refrigerators?

When we talk about refrigerators, there are several types of compressor that can be used. There are mainly five types of compressors used in refrigerators that are described below.

How long should a refrigerator compressor run?

In most cases, the refrigerator’s compressor should run for four to eight hours before it shuts down and enters the defrost cycle.

How does an impeller compressor work?

As the name suggests, this compressor use an impeller wheel’s rotation action to create a centrifugal force in a round chamber where the refrigerant is present. Restricted by fixed volume chambers, they are able to compress large refrigerant volumes into low pressures. With the simple design, a few moving parts and being energy efficient, they are the right choice.

What is the sealing feature of a refrigerator?

The sealing feature of compressors ensure that no route is provided to the gas to leak off the fridge system. There are three main types; open, hermetic, and semi-hermetic.

Where is the reset button on a computer?

Usually, the button is located on the front of the device. Similar Asks.

How long does it take to reset a Maytag refrigerator?

Most don't automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

How to defrost a refrigerator with a Phillips screwdriver?

Locate the defrost timer. Remove the panel that is below the refrigerator doors. Remove the rear bottom panel with a Phillips screwdriver or a socket wrench. On the front of the defrost timer there will be a circular notch. Turn the notch until the refrigerator fan has shut off.

Why does my fridge stop working?

Thereof, why would fridge suddenly stop working? Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won't have a fan). To do this, unplug the fridge and pull it out.

Does a refrigerator reset?

There is no reset button on a refrigerator,but there are many things that can keep it from cooling. There is not a reset button on most models of refrigerators.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version1.24sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[18:06:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[18:06:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[18:06:27] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[18:06:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[18:06:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[18:06:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[18:06:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[18:06:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[18:06:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (14.6ms)
  • Application (1.22s)
  • 1 x Application (98.79%)
    1.22s
    1 x Booting (1.18%)
    14.60ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.2s
    • select * from `posts` where `published_at` <= '2025-06-07 18:06:27' and `slug` = 'is-there-a-reset-button-on-a-refrigerator-compressor' and `posts`.`deleted_at` is null limit 1
      2.6ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-07 18:06:27
      • 1. is-there-a-reset-button-on-a-refrigerator-compressor
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 133600 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.75msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 133600
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      810μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      520μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      230μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.19s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 10592 limit 1
      1.77msview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 10592
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        XjDrgczhyJ0IoYVZlq1ncB0c9Xt2qivszY2IMXGS
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/is-there-a-reset-button-on-a-refrigerator-co...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /is-there-a-reset-button-on-a-refrigerator-compressor
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=9cec13b8e1c06563.1749299775.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlBLNk4waGFFLzBmMTN2TDkwcDd4eHc9PSIsInZhbHVlIjoiQTZIczMzWG95NFJEZGJIMjZPNXdaRkt0bXNPYW5aSFRHTWdXOFFoWDZVZXRPS0FZSk5BMFo3a2dicVJZUFNRQ2ZCUTl0bWdHNXdqbVFadmNycnFCTzVkWkFGbUNrVHVCdVE4Rm1iU0ZQOHRUZlZzR0RRQjQxdFRTOTFKWjByYVAiLCJtYWMiOiJkZWRiNzhlODk2NjhkMTY2ZGNlMTMwNzI4YmIxNmFmMWFlYmQ2NGNiNTA5NDVkMGZmMDI3ZDY1ODRlYWI4YzI1IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IlQ5aFU1MUttK3pvYlhFRHVKTUFrZkE9PSIsInZhbHVlIjoiVy9QdGhhL1RsaGp6RHhicFIwRHJYaWRNN1JZRTlJYWZuK2FvVGJSUGZPTWUxRG5KTWNZY1c0ODlsdTAySHlEeEtMcFFIMFl5Y2hJSDJiM2V4MVZmQ0prRFhXVXFlRTFzT0FtcHNkTzQ2Y3NjN3BGUStpeEgzbzg5eHpJWVVnSmgiLCJtYWMiOiI3MTRjNjM4MWMxM2ZjM2Y3ZDdhZTcwYjlhM2IwOTJkYTBkMWQ5ZDg2MDFlYWI2MzUwZjZkMWRhNDFkMjI5ZWRmIiwidGFnIjoiIn0%3D_pk_id.64.7c30=9cec13b8e1c06563.1749299775.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlBLNk4waGFFLzBmMTN2TDkwcDd4eHc9PSIsInZhbHVlIjoiQTZIczMzWG95NFJEZGJIMjZPNXdaR" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.227" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94c031f888cf34ad-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.227, 172.69.17.64" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/is-there-a-reset-button-on-a-refrigerator-compressor" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/is-there-a-reset-button-on-a-refrigerator-compressor" "REMOTE_PORT" => "49918" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.17.64" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=9cec13b8e1c06563.1749299775.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlBLNk4waGFFLzBmMTN2TDkwcDd4eHc9PSIsInZhbHVlIjoiQTZIczMzWG95NFJEZGJIMjZPNXdaRkt0bXNPYW5aSFRHTWdXOFFoWDZVZXRPS0FZSk5BMFo3a2dicVJZUFNRQ2ZCUTl0bWdHNXdqbVFadmNycnFCTzVkWkFGbUNrVHVCdVE4Rm1iU0ZQOHRUZlZzR0RRQjQxdFRTOTFKWjByYVAiLCJtYWMiOiJkZWRiNzhlODk2NjhkMTY2ZGNlMTMwNzI4YmIxNmFmMWFlYmQ2NGNiNTA5NDVkMGZmMDI3ZDY1ODRlYWI4YzI1IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IlQ5aFU1MUttK3pvYlhFRHVKTUFrZkE9PSIsInZhbHVlIjoiVy9QdGhhL1RsaGp6RHhicFIwRHJYaWRNN1JZRTlJYWZuK2FvVGJSUGZPTWUxRG5KTWNZY1c0ODlsdTAySHlEeEtMcFFIMFl5Y2hJSDJiM2V4MVZmQ0prRFhXVXFlRTFzT0FtcHNkTzQ2Y3NjN3BGUStpeEgzbzg5eHpJWVVnSmgiLCJtYWMiOiI3MTRjNjM4MWMxM2ZjM2Y3ZDdhZTcwYjlhM2IwOTJkYTBkMWQ5ZDg2MDFlYWI2MzUwZjZkMWRhNDFkMjI5ZWRmIiwidGFnIjoiIn0%3D_pk_id.64.7c30=9cec13b8e1c06563.1749299775.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlBLNk4waGFFLzBmMTN2TDkwcDd4eHc9PSIsInZhbHVlIjoiQTZIczMzWG95NFJEZGJIMjZPNXdaR" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.227" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94c031f888cf34ad-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.227, 172.69.17.64" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749299787.6231 "REQUEST_TIME" => 1749299787 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "XjDrgczhyJ0IoYVZlq1ncB0c9Xt2qivszY2IMXGS" "askhelpdesk_session" => "T5RjmfaJX6Ait9gWVRdOLuNFJKbZrGh7k3140gGC" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sat, 07 Jun 2025 12:36:27 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkJ4Qmc4YjZkYjBMSTk2QW1jajJKbHc9PSIsInZhbHVlIjoiSlZpWXZYTUEvMWMxU2JpMXZMWXVPMDVLUTBDREJaNUVNMDJwdzNPVHJpdG1yeVNUaitqRnBZT2dQK0Q3U1lXY2doQTVJeHhqdTJyTzhHYWcyenJHVWI1YnIzS0pFbDhIYUlkMDVPOTVTTkZhc1JkYVBZYzhZV1lrR0xMd2JuNmEiLCJtYWMiOiI3YjU0NmM3ZjJhNjM2NzE5OTNiOTMwMWM1ZmM5ZTJkNGNhMWFhZGE1ZTY4ZGRkYWNjZGQ3NDg0OTQxNGRlN2ExIiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 14:36:28 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IkJ4Qmc4YjZkYjBMSTk2QW1jajJKbHc9PSIsInZhbHVlIjoiSlZpWXZYTUEvMWMxU2JpMXZMWXVPMDVLUTBDREJaNUVNMDJwdzNPVHJpdG1yeVNUaitqRnBZT2dQK0Q3U1lXY2doQTVJe" 1 => "askhelpdesk_session=eyJpdiI6ImIzSllxS3lhaVdnNTVkZUVoblNsclE9PSIsInZhbHVlIjoiS2JsM2V0R0phT2hYWXloaVBjbzFtWnhMUW9uRHpqK2ZGem1VTGFDdjZjL0dOOEZuRTdsdTlYWmtGQUZSS3RDZXFZV2kzcXlLcFRoQ3lMZ21UZmcwaTJKMnN4OFpZellFaCtwcldWeDFPakVRcWlpNDhnWWZMVVROZVRVTVhrajAiLCJtYWMiOiIyZjYyMDQ2NzFmZmI5YTNjYjA3OTNmNzQzMWI2YjM1MDBhZjE1YTA4MWYwNTQwODU4ODU4MzFhNDZlYWM2NjZmIiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 14:36:28 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImIzSllxS3lhaVdnNTVkZUVoblNsclE9PSIsInZhbHVlIjoiS2JsM2V0R0phT2hYWXloaVBjbzFtWnhMUW9uRHpqK2ZGem1VTGFDdjZjL0dOOEZuRTdsdTlYWmtGQUZSS3RD" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkJ4Qmc4YjZkYjBMSTk2QW1jajJKbHc9PSIsInZhbHVlIjoiSlZpWXZYTUEvMWMxU2JpMXZMWXVPMDVLUTBDREJaNUVNMDJwdzNPVHJpdG1yeVNUaitqRnBZT2dQK0Q3U1lXY2doQTVJeHhqdTJyTzhHYWcyenJHVWI1YnIzS0pFbDhIYUlkMDVPOTVTTkZhc1JkYVBZYzhZV1lrR0xMd2JuNmEiLCJtYWMiOiI3YjU0NmM3ZjJhNjM2NzE5OTNiOTMwMWM1ZmM5ZTJkNGNhMWFhZGE1ZTY4ZGRkYWNjZGQ3NDg0OTQxNGRlN2ExIiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 14:36:28 GMT; path=/XSRF-TOKEN=eyJpdiI6IkJ4Qmc4YjZkYjBMSTk2QW1jajJKbHc9PSIsInZhbHVlIjoiSlZpWXZYTUEvMWMxU2JpMXZMWXVPMDVLUTBDREJaNUVNMDJwdzNPVHJpdG1yeVNUaitqRnBZT2dQK0Q3U1lXY2doQTVJe" 1 => "askhelpdesk_session=eyJpdiI6ImIzSllxS3lhaVdnNTVkZUVoblNsclE9PSIsInZhbHVlIjoiS2JsM2V0R0phT2hYWXloaVBjbzFtWnhMUW9uRHpqK2ZGem1VTGFDdjZjL0dOOEZuRTdsdTlYWmtGQUZSS3RDZXFZV2kzcXlLcFRoQ3lMZ21UZmcwaTJKMnN4OFpZellFaCtwcldWeDFPakVRcWlpNDhnWWZMVVROZVRVTVhrajAiLCJtYWMiOiIyZjYyMDQ2NzFmZmI5YTNjYjA3OTNmNzQzMWI2YjM1MDBhZjE1YTA4MWYwNTQwODU4ODU4MzFhNDZlYWM2NjZmIiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 14:36:28 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImIzSllxS3lhaVdnNTVkZUVoblNsclE9PSIsInZhbHVlIjoiS2JsM2V0R0phT2hYWXloaVBjbzFtWnhMUW9uRHpqK2ZGem1VTGFDdjZjL0dOOEZuRTdsdTlYWmtGQUZSS3RD" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "XjDrgczhyJ0IoYVZlq1ncB0c9Xt2qivszY2IMXGS" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/is-there-a-reset-button-on-a-refrigerator-compressor" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]