is the contractor license test hard

Passing your general contractor license test on your first try can actually be harder than you think, but it can be easy with the right information. In California, thousands of people apply for the General Contractor

License each year. The exam is for tradesmen who have achieved a journeyman level of expertise in their trade.

Full Answer

Is the general contractor license test hard to pass?

- Digital Constructive Passing your general contractor license test on your first try can actually be harder than you think, but it can be easy with the right information. In California, thousands of people apply for the General Contractor License each year. The exam is for tradesmen who have achieved a journeyman level of expertise in their trade.

Do I need a perfect score on the construction licensing exam?

Construction licensing exams are pass/fail, there is no extra credit for a perfect score. If you’re like me, the allure of a perfect score on a test is hard to ignore, but in the case of contractor licensing exams, we must.

How can I pass my contractor exam?

Here are some of the best exam taking tips to help you pass your exam. Obviously the most important factor in passing your contractor exam is knowing the material. However, don’t lose sight of the goal: passing the test! Learning is great but you can’t use what you’ve learned if you don’t pass.

How to prepare for the OSHA general contractor license exam?

For example if the question is asking you about potential job site safety hazards. Go do your research on OSHA. Be Consistent: Get into the exams every single study and study as consistently as possible. Get into the habit of taking exams and answering questions. 3. Use a General Contractor License Exam Prep Book

How hard is the California Contractors license exam?

There are about 80 to 125 questions on the trade, on average. In order to pass the law test you are required to answer 73% of the questions correctly. You will be informed at the test site about the exact percentage of correct answers needed to pass each trade examination.

What is the passing score for Cslb exam?

You need to answer 72% of the questions correctly to pass the law. Passing scores on some trades vary but on most trade exams you need to answer 70% of the questions correctly to pass. How can I pass the exam? We can help you pass the state exam the first time!

How long is the NC General Contractors exam?

The exam typically allows 3.5 hours to complete 90 questions, and you need to score at least 70% (answer 63 questions correctly) to pass. [NC § 87-10(b)].

How long does it take to get a general contractor's license in Florida?

To become a general contractor in Florida, you must pass a state-issued contractor exam and have at least 4 years of work experience. While contractor review costs money, it can help you find contractor positions through construction companies.

What happens if you fail the CSLB exam?

If you fail to appear for an examination, you must pay a $100 rescheduling fee. Your examination may be rescheduled one time without a fee if you provide documented evidence that the failure to appear was due to a medical emergency or other circumstance beyond your control.

How long is the California Contractors exam?

3.5 hoursThe Trade exams range between 100 and 120 questions. The test is timed. The state allows 3.5 hours for each exam and you are given the results immediately after taking each test.

Is the NC general contractor test open book?

This examination is OPEN BOOK.

How long does it take to get a contractors license in NC?

If an application is submitted with a completed exam, the licensing process takes about 30 days. If an exam is required, it will depend on when exams are successfully completed. It takes about 2 to 3 weeks after exams are completed before a license to be granted.

How much does it cost to get a contractors license in North Carolina?

Application fees for a North Carolina contractors license are as follows: General contractors license – $75 for a limited, $100 for an intermediate, and $125 for an unlimited license classification.

How hard is it to get a general contractor license in Florida?

To become a general contractor in Florida, you must pass a state issued contractor exam and have at least 4 years of work experience. Though the contractor exam costs money to take, it can help you find positions as a contractor through construction companies.

How much is a contractors license in Florida?

For a registered general contractor license: If applying between May 1 of an odd year through August 31st of an even year: $309. If applying between September 1 of an even year through April 30 of an odd year: $209.

How much does a GC make in Florida?

How much does a GC make in Florida? As of Jun 20, 2022, the average annual pay for the GC jobs category in Florida is $81,911 a year. Just in case you need a simple salary calculator, that works out to be approximately $39.38 an hour. This is the equivalent of $1,575/week or $6,826/month.

Arrive Early and Prepared

Plan to arrive at the testing facility at least 15 minutes before your scheduled appointment. You don't want to start off on the wrong foot by being rushed. And if you're late, you will generally only receive the remaining allotted time to complete the test, further damaging your morale and score.

Read Carefully

One of the easiest ways to miss questions is to read them incorrectly. Even when you believe you know immediately what the question is asking, read it carefully. Look for particular words, such as always, never, must, or not.

Don't Go in Order

Taking the questions in the order in which they're presented is a natural tendency. However, if you don't know the answers, you can easily get stuck on one or a few questions and waste precious time. Instead, go through the exam and answer all the questions you feel confident about.

Mark Off Wrong Answers

If you're not sure about any particular question, dismiss the obviously wrong answers. You should often be able to mark off two of the answers, leaving you with a 50/50 chance of choosing the right one.

Answer Everything

Don't leave any questions unmarked as you start to run out of time. Even if you have no idea what the answer may be, you will still have a one in four chance of choosing a correct answer by accident. If you don't try at all, you have zero chance of getting it right.

When is the contractor license exam 2020?

October 27, 2020. by Kaylee Verhoeven. If you are like me, deciding to get your contractor license is a big deal. You’ve spent time looking for the best exam prep course for the best price and now you’re signed up to take your exam. You’ve circled the date on your calendar and the pre-test jitters are setting in.

How to pass a timed test?

Start by only answering the easy questions. Read the entire exam and only answer the questions you absolutely know the answer to. This will give you a sense of progress and your subconscious will begin thinking about the questions you skipped. When you’ve got a timed test, there’s always the concern that you’ll get hung up in a section ...

Can you take a plumber exam in one room?

All types of exams are given in one room. You may be sitting next to a plumber taking his exam or a beautician completing hers. If by chance, there is more than one contractor hopeful, remember that many students who finish quickly… fail.

Is there extra credit for a construction license?

Construction licensing exams are pass/fail, there is no extra credit for a perfect score. If you’re like me, the allure of a perfect score on a test is hard to ignore, but in the case of contractor licensing exams, we must. Remember, your goal is to answer the number of questions correctly that will get you a passing score.

Can you second guess a test?

Don’t second guess yourself. As a general rule, once you’ve answered a test question, don’t change your answer even if you’re unsure of the answer you selected. It has been statistically proven that you are much more likely to change an answer from correct to incorrect.

Is there a penalty for guessing?

There is no penalty for guessing. Once you have gone through the exam at least twice, time may be running short and now would be a good time to start guessing. You have a one in four chance of getting the question correct while unanswered questions are marked wrong.

Do you compete with other applicants for a SAT exam?

Don’t compete with other applicants. You’re given plenty of time to complete the exam and you should use as much of it as you need. Don’t worry if other examiners finish before you do, most likely they are taking a completely different exam. All types of exams are given in one room.

What is contractor exam?

The contractor’s exam is an open-book test. This means applicants can take study materials into the testing area with them. But this is not an excuse to wait until the same day to look at those materials. Preparing beforehand is always a good idea with any kind of exam, especially one that determines the future of your career.

How often is the contractor exam in Florida?

The contractor’s exam is offered six times per year. Contractors need to set up the testing date and time themselves; the state does not set this up. Professional Testing Inc., handles testing for Florida contractor exams. Making the appointment a month or two in advance is recommended.

Do contractors have to prove their skills?

But no matter how many past employers sign an application, new contractors still must prove their skills. This is where the all-important contractor’s exam comes in.

Is a contractor license good in Florida?

Beginning a new career as a general contractor can be very rewarding, with the right experience and the drive to pursue it. Attaining a contractor’s license in Florida doesn’t have to be complicated, either. With the right amount of preparation, the license is as good as yours.