When local companies began creating new oil finish formulas to replicate this look, they decide to name them simply “Danish oil” because of the perception that “Scandinavian oil” or “Scandinavian teak oil” were too long to use for names. If you see any products labeled as such, just realize that they are essentially the same as Danish oil.
Full Answer
What is Scandinavian Oil?
"Scandinavian Oil" appears to be any mixture of chemicals that is wet that you would like to put on timber. Feast Watson "Scandinavian Oil" has polyurathane in it as per the back of the can. Wattyl "Scandanvian Teak Oil" (sounds like they couldn't decide what to call it).
Why is it called Danish oil?
These items tended to feature a low-sheen oil finish. When local companies began creating new oil finish formulas to replicate this look, they decide to name them simply “Danish oil” because of the perception that “Scandinavian oil” or “Scandinavian teak oil” were too long to use for names.
What is the best brand of Danish oil?
There are so many different brands of Danish oil on the market, but the most popular (and reliable) brands are Watco, Deft and Briwax Danish Oil. Although Watco is by far the most popular brand among them.
What are the ingredients in Danish oil?
Danish Oil Ingredients 1 Linseed oil 2 Tung oil 3 Mineral spirits 4 Varnish 5 Resins More ...
Is there an alternative to Danish oil?
Danish Oil is hard wearing and non-toxic when fully dried. You could also use Boiled Linseed Oil or Tung Oil too.
What is Scandinavian oil used for?
The Scandinavian Oil aims to highlight the natural beauty in your raw timber by using a clear blend of penetrating oils and resins. It enhances the stunning natural grain and colour of your timber with a elegant gloss or satin finish and a light film build.
What oil is better than Danish?
Tung Oil dries to a matt finish vs Danish Oils satin / semi-gloss finish and Tung Oil is 100% natural. So if you're looking for a wood oil with either a matt finish, or being 100% natural and environmentally friendly is key, then Tung Oil is the best bet.
Why is Danish oil not suitable for Oak?
Danish oil doesn't have the ability to smoothen the wood grain naturally. So, after each coating, wet sanding is required to get a smooth surface. The brush marks also will be removed because of wet sanding.
Why is it called Danish oil?
The name 'Danish oil' simply comes from the fact that during the second half of the 20th Century, Scandinavian furniture, protected with an attractive low sheen finish, began to be exported around the world. This finish was given the name 'Danish oil' because of where it came from.
Should you sand after Danish oil?
Danish oil dries slowly, so wait overnight before recoating. And it goes on thin, so apply a minimum of three coats. You don't have to worry about brush marks, but you'll get an even smoother finish by lightly "wet" sanding between the second and third coats.
What is the best oil to use on wood?
Linseed Oil Linseed oil, also known as flaxseed oil, is one of the most popular wood finishes in the world. Like other hand-rubbed oil finishes, linseed oil saturates deep into the wood grain to protect against scratches and changes in humidity.
Does Danish oil get darker with more coats?
As you can see, the initial coat had a pretty light color, and actually made the legs look comparatively much darker… but that is OK because Danish Oil builds up its finish over multiple coats.
Why is my Danish oil sticky?
Sticky Danish Oil Although Danish oil is the best method for maintaining your solid wooden worktops, it can become sticky if a spray disinfectant is used, especially if the oil has been freshly applied. Danish oil can also become sticky if applied incorrectly, at the wrong rate.
Is 2 coats of Danish oil enough?
Two coats is often good enough with products like "Danish oil". You're mostly finishing for looks and there's often little improvement, sometimes none, between the second and third coats.
Can I put Danish oil over stained wood?
Danish Oil may be applied to previously oiled surfaces. On previously stained or dyed surfaces it is advisable to test a small area first to make sure that the Danish Oil will produce the desired result. Our Danish Oil is based on Tung Oil, and is a penetrating oil which will 'feed' and protect wood.
Do you need to sand wood before applying Danish oil?
To remove any old waxes and oils, gentle sanding may be required. This will also help smooth the wood before applying the Danish Oil.
What is Scandinavian oil?
The Scandinavian Oil aims to highlight the natural beauty in your raw timber by using a clear blend of penetrating oils and resins. It enhances the stunning natural grain and colour of your timber with a elegant gloss or satin finish and a light film build. After application, your timber will be elegant, natural and scratch ...
How to apply Scandinavian oil to wood?
How to apply Scandinavian Oil to Coated Timber: Apply using a scouring pad or fine steel wool (000). Make yourself a coffee and allow the Scandinavian Oil to penetrate for 30 minutes. When the surface gets tacky remove excess surface oil with a clean dry cloth. Make sure to allow for 8 hours between coats.
How to clear coat with Scandinavian oil?
Follow these steps to learn how to clear coat using our Scandinavian Oil: Apply a coat of Scandinavian Oil using a clean soft cloth or pad, which is thoroughly saturated, or apply with a brush and then work the Scandinavian Oil into the timber with a clean soft cloth or pad.
Does Scandinavian oil need to be thinning?
Scandinavian Oil does NOT require thinning. How to maintain my timber after using Feast Watson Scandinavian Oil: One simple step to ensure your timber maintains its shine. Ensure the surface is dry and free of dirt, dust, oil and grease.
What is Danish oil?
Danish oil is a popular wood finish, and it’s basically a mixture of an oil, a varnish, and a thinner. Together, these ingredients really do bring out the natural beauty of the wood, while providing more surface protection than plain oil finishes. Typically, boiled linseed oil or tung oil is used. These both are drying oils, and they darken ...
How to apply Danish oil?
How Is Danish Oil Applied. The first step is to make sure the wood is sanded nice and smooth. 220 grit is plenty smooth. Once all the sanding dust is removed, you can apply the finish. The first coat can go on with a rag if you want, but the raw wood will soak up quite a bit, so it’s a good idea to apply this coat with a brush.
Can you use regular linseed oil in a mixture?
For a simple mixture, using equal parts poly, boiled linseed oil, and mineral spirits (each a third), is all you need to do. Do not use regular linseed oil, it won’t dry well and makes the finish more difficult. Pour each ingredient into a glass jar and stir it well. Then it’s ready for use.
Is Danish oil good for film?
Film finishes like varnish, lacquer, and poly provide exceptional protection, but much less in the way of color and grain enhancement. Danish oil, however, provides the best of both worlds.
Can you mix Danish oil with turpentine?
If you use turpentine, get the kind that is made from pine. This smells much better than other kinds of turpentine. When you mix your own Danish oil, do it in a glass jar with a metal lid. If you use a plastic container, oxygen can get into the mix and over time can ruin the finish.
Can you use tung oil instead of linseed oil?
Pour each ingredient into a glass jar and stir it well. Then it’s ready for use. If you want better moisture protection, use tung oil instead of boiled linseed oil, and aquatic varnish instead of poly. Just keep in mind, the tung oil dries slower and you’ll need to allow more time between coats.
What is Danish oil?
Danish Oil is often made of polymerized linseed oil or tung oil, it is known as a hard-drying oil, woodworkers use it as a primer on bare wood before applying varnish or paint on it.
What is the best oil for woodworking?
The following are some of the classic wood oils used in woodworking: 1 Linseed Oil 2 Tung Oil 3 Danish Oil 4 Teak Oil
What is teak oil used for?
It’s a combination or blend of different solvents and oil, allowing it to be used as a varnish for items made of teakwood. It’s suitable for interior and exterior surfaces because it beautifies the wood grain, ...
Is Danish oil toxic?
Yes, the problem with today’s Danish Oil is not the “oil,” but the other toxic chemical components or solvents used to prepare such Oil. Numerous brands are competing to make a faster yet cheaper oil in which they cut back the natural oil quantity with increased other toxic ingredients.
Is wood oil as durable as varnish?
Moreover, the protective quality of wood oil is not as durable as varnishes. However, they’re still favorable among woodworkers because it brings the unique grains or wooden characters while adding an attractive gloss or sheen to the surface, which you can’t achieve in varnishes.
Does Danish oil darken wood?
Yes! Danish oil will darken the wooden pieces slightly because it possesses penetrating characteristics, which can be mixed with oil-based solvents to create wood stains. If you’re using the Danish Oil composed by tung oil than it will not darken as much as composed by linseed oil.
What color is Danish oil?
However, how dark the wood gets will depend what color danish oil you use. You can get Danish Oil in a range of colors from Golden Oak to Black Walnut, but what will really determine the final color of your work piece will be the type of wood you are treating.
How long does it take for Danish oil to dry?
Once you’ve finished coating, you can leave the oil finish to dry (it’ll take around 6 hours, but leave it overnight anyway).
Can you sand off Danish oil?
Remember, Danish Oil doesn’t really hold up well against even light scratches, so a sander should be able to take off a fair bit of the 3rd and 4th coatings.
Is Danish oil safe to use on furniture?
Its non-toxic, so it can be used on most wood household furniture. Its waterproof, but not overly slippery to the touch once dry. There are, however, a few disadvantages to applying a Danish oil finish in that; Its soft film coat isn’t very durable. A Danish oil treatment will need more maintenance due to scratches and marks.
Can you use tung oil on wood?
To put it simply, using this tung oil variant on wood surfaces gives it a dark rich finish that is incredibly water resistant. You wouldn’t want to use it on a table surface (due to possible scrapes marking the satin coat), but it is perfect for handles on cutlery.
Is Danish oil good for scratches?
Its soft film coat isn’t very durable. A Danish oil treatment will need more maintenance due to scratches and marks. And, because Danish oil isn’t very scratch resistant, it doesn’t hold up well against everyday wear and tear.
What is the difference between oil and sealer?
There is a big difference between using oils and using a sealer. An oil is supposed to soak into the wood, but a sealer creates a protective coating over the top of it. It prevents the color from fading out of teak wood too quickly by blocking the effects of air, moisture, and UV rays.
What is tung oil varnish?
Many manufacturers are keen to market the oriental mystique of tung oil with a product that is easier for the average Joe to use, and so they’ve come up with many varieties of “Tung Oil Finish” or “Tung Oil Varnish”. These are largely similar to teak oil in that they usually contain a combination of oil, varnish, and mineral spirits. The oil component could be tung or linseed, or maybe from another type of natural oil. There’s no guarantee that a tung finish actually contains any real tung oil.
Why is teak oil called baby oil?
It is simply named “teak oil” because it is marketed to be used on teak wood, just as “motor oil” is sold for use in a motor, and “baby oil” is for a baby’s butt. Teak oil is not gathered by pressing teak wood just as we don’t harvest baby oil by squeezing babies (ouch!). There are some very good reasons to not apply oils on teak wood furniture ...
What is tung oil?
Sometimes it contains a small amount of pure tung oil in the mix as well. Linseed and tung oils are both naturally occurring plant-based materials.
How to apply teak oil to wood?
You can use a brush to apply the teak oil to the wood initially. Then with a clean cloth rag you want to work it into the wood and distribute it evenly for total coverage. After waiting for several minutes you need to go over the surface again with a cloth to absorb any excess oil and prevent it from pooling.
What is teak oil used for?
The two main teak oil uses are for coating outdoor wood furniture and wooden sections of boats. In both cases, the wood is used outdoors and experiences lots of contact with the elements—water, wind, sunshine, etc. Teak wood begins as a lovely golden color when it is freshly cut or sanded. But over time it fades to a gray color.
Why is oil on teak wood?
The other main problem with oil on teak wood is that the extra moisture on the surface can be a ripe breeding ground for mildew. Once your teak tables get infected and start showing little black spots, it adds a lot of extra work to fix the problem.
What is the difference between teak oil and Danish oil?
The main difference is that Teak Oil dries to a matt finish, whereas Danish Oil dries to a satin / semi-gloss finish. Unlike Tung Oil or Linseed Oil, which are 100% natural oils, Teak Oil and Danish Oil are both blends and so no two recipes are the same.
What is wood oil?
They are both wood oils designed to soak in, protect, and enhance wooden surfaces. They both work on indoor wood such as furniture, flooring and cabinetry and they also both work on outdoor wood such as garden furniture.
Can teak oil be used on wood?
Both oils are naturally very slow driers and so we thin the mixture so it soaks into wood easily, and so that it is really easy to apply. This is why we recommend our teak oil for garden furniture and exterior wood, as both oils penetrate the wood and protect it from within.
What is Danish oil?
Danish oil contains oil with some varnish, and thinner added. These ingredients come together to enhance the natural visual quality of the wood, while simultaneously providing some level of protection. The main elements of Danish oil are usually boiled linseed oil and Tung oil.
What is the difference between Danish oil and polyurethane varnish?
The first one is a natural extract mixed with some additives, both natural and artificial. Polyurethane varnish is a synthetic product but may contain some natural additives as well.
What is varnish component?
The varnish component may be varnish or polyurethane (which is also a type of varnish). Then, we add thinner to make the liquid spread more efficiently and penetrate deeper into the wood. The thinner we add usually comes as either turpentine or mineral spirits (paint thinner).
What kind of varnish is used for flat sheens?
You can get polyurethane varnish in flat or glossy sheens. You get three types of polyurethane varnish, water-based, solvent-based, and oil-based. The water-based variety is the most environmentally-friendly and safe one to use as compared to the solvent-based varnish.
What is polyurethane varnish?
Polyurethane is a synthetic resin, and we use this varnish to finish all types of wooden and non-wooden surfaces. It is a transparent film, resistant to water, mildew, and fungus. On drying, the polyurethane varnish forms a tough coating that is resistant to abrasions.
Can you use Danish oil on varnish?
Thus, avoid using Danish oil on surfaces that have been painted or have a polyurethane film, lacquer, or varnish. For making your own Danish oil, you should ensure that it contains ingredients with drying agents such as Tung oil and boiled linseed oil. Avoid adding oils that do not dry, for example, mineral oil.
Does Danish oil protect wood?
The result is that they not only enhance the looks of the wood but provide protection as well. If you use a film finish like lacquer, polyurethane or varnish, you get excellent protection, but they don’t do much to enhance the surface of the wood looks. With Danish oil, you get both protection and good looks.