Is Fusion Pro sanded Grout stain resistant?
This professional grade sanded grout features unsurpassed stain resistance with no sealing required. Its Single Component® formula is ready to use and easy to spread and clean. Fusion Pro can be installed in commercial and residential environments, interiors and exteriors, and on walls and floors and specifically shower floors.
What is Fusion Pro®?
Its Single Component® formula is ready to use and easy to spread and clean. Fusion Pro can be installed in commercial and residential environments, interiors and exteriors, and on walls and floors and specifically shower floors. Its patented formulation can be applied on all tiles and has built-in Microban antimicrobial product protection.
Does Flexcolor or fusion have any scratch problems?
I have not had scratching problems with Flexcolor or Fusion, but we do use a very soft, rubbery float more like a squeegee. A great unsanded grout -- ArdexFG-C , in case it is needed .
Is sanded Grout better than unsanded Grout?
This is because it is more durable than unsanded grout, can handle foot traffic, and is usable for larger tile joints. Next time you take on a big project for a customer and are going to be renovating a tile kitchen or a bathroom, you’ll definitely want to grab some high-quality sanded grout.
What type of grout is Fusion Pro?
Answer: Fusion Pro is an advanced, proprietary acrylic plus silicone resin that cures as hard as cement grout. With Fusion Pro, CUSTOM created the original Single Component® Grout. This patented formula combines the best features of cement and epoxy grouts into a single product.
Do I want sanded or unsanded grout?
Sanded grout is best for grout lines ranging from 1/8-inch to 1/2-inch. Grout lines wider than 1/2-inch are impractical and will crack and become unstable. Because unsanded grout can also be used for 1/8-inch lines, between the two it is recommended that you use sanded grout.
Is Fusion Pro Single Component grout epoxy?
A: Fusion Pro Single Component Grout is not an epoxy grout.
Can Fusion Pro grout be used on glass tile?
Sanded Fusion Pro Grout won't shrink while curing making it suitable for grout joints as large as 1/2" and as small as 1/16". This sanded, pre-mixed grout can be used on glass tiles, ceramic, polished natural stone, and porcelain.
Should I use sanded or unsanded grout in a shower?
Therefore, any homeowner that has highly polished stone such as marble, or a honed stone, will want to choose an unsanded grout. Non-sanded grout is best used for vertical tile such as in the bathroom and showers. This grout is better working material and sticks better to vertical surfaces than sanded grout.
Do sanded and unsanded grout look the same?
Sanded grout is thicker because of the addition of sand in its mix. Non-sanded grout is thin with a smoother texture. Sanded grout is suitable for tile joints wider than 1/8 inches. Unsanded grout is recommended for tile joints less than 1/8 inches wide.
Should I seal Fusion Pro grout?
Sealing of Tile Assembly Fusion Pro grout is a stain resistant grout. Sealing is not necessary. If sealing of the tile is necessary, use a water based sealer like AquaMix Sealer's Choice Gold and wipe off excess on grout joints.
How do you remove the grout haze from Fusion Pro?
Change the water and rinse your sponge frequently to reduce grout haze, but don't over-wash. Minor haze will be removed in the next step. 1. Drag a clean, lightly damp microfiber towel diagonally across the surface for the final clean up.
Can water be added to Fusion Pro grout?
† • Tile and grout joints must be clean and dry. Do not add water to the grout. Do not mix the grout. Do not use Fusion Pro with irregularly shaped or spaced tile or stone, such as pebble style mosaic tile, where joint width or depth exceeds 1/2" in any direction.
Does Fusion Pro grout crack?
Fusion Pro is a good product and recommend it to anyone. Very strong grout. Does not crack or stain. MUST work in small areas and fast.
How long does it take for Fusion Pro grout to cure?
seven daysQuestion: How long does it take for Fusion Pro to fully cure? Answer: Fusion Pro develops its hardness in typical installation environments over seven days. At the end of three days, Fusion Pro and cement grouts demonstrate a similar hardness. At the end of seven days, full hardness is achieved.
How long does fusion grout take to dry?
Curing of Product Allow 24 hrs until light traffic, and 7 days at 70° F (21° C) and 50% relative humidity before intermittent water exposure (such as a shower enclosure). Lower temperatures and higher humidity will slow the cure times. Covering Fusion Pro immediately after grouting will extend the cure time.
Why add sand to grout?
Adding sand to the grouting mix ensures that the material doesn’t shrink as much. This is because the ratio of aggregate material to cement is much higher. For pure durability, sanded grout always wins in the contest between sanded vs. unsanded grout. As the grout cures, the sand becomes locked in place and it won’t move.
What happens if you use a smaller grout than 1/8?
So if you’re doing a project with joints that are smaller than 1/8 inch, you run the risk of having trouble installing your tiles correctly. In addition, you could be leaving behind, pinholes that tell customers that you used the wrong grouting material– neither of which is ideal.
Can you sand grout over stone?
Sanded grout can work a lot like sandpaper. The materials used to create the sand are often much harder than soft stones. Spreading sanded grout over soft tiles can cause damage, especially on soft limestones and marbles. This is a huge determining factor when choosing between sanded vs. unsanded grout.
Is sanded grout a sandpaper?
Another consideration when choosing between sanded vs. unsanded grout is the tile material that you’re working with. The harsh aggregate material present in sanded grout can damage delicate materials such as granite, marble, limestone, and other soft stones. Sanded grout can work a lot like sandpaper.
Can you spread grout on a vertical surface?
You can easily spread it onto a vertical surface, and will stick there with no issue as you work to force it into grout lines. And even though unsanded grout shrinks, this isn’t much of an issue on a vertical surface. Tiles are typically fairly close together – usually between 1/8 of an inch and 1/16 of an inch.
Can you use sanded grout on tile?
A final note is that you won’t be able to use just any sanded grout if you’re working on extremely large tile joints. For projects with a 3/8 of an inch or larger tile joint, you’ll need what’s known as “wide-joint mixture” grout, which is readily available at most flooring and hardware stores.
Is sanded grout good for interior flooring?
Sanded grout is the go-to choice for most interior flooring installations.
Is the Tec 550 a competitor to Permacolor?
tec 550 is a a very similar competitor to permacolor. I have used it and liked it. They have a good bagged sealed package as well.
Can epoxy be beat?
Cost aside, epoxy can't be beat.
Is simple grout latex based?
FWIW simplegrout is garbage and not part of the acrylic grout group. Its latex based.
Is there a grout that is premixed?
In addition to traditional cement grout, epoxy grout and urethane grout, there seems to be another category of premixed grout. Products like Custom Building Products' Fusion Pro & SimpleGrout, Mapei's Flexcolor QC and Laticrete's Plasma. They are priced between traditional and epoxy/urethane but unlike most epoxy/urethane grouts, they are readily available at Home Depot/Lowes (except Plasma).
