What is the your value of densglass?
What is the R value of DensGlass? R-Value (ASTM C518): 0.56. 12. Mold Resistance (ASTM D3273): 10, in a test as manufactured. Can DensGlass be used as structural sheathing? DensGlass Silver sheathing can be used in applications such as under wood shakes or shingles, plywood panel siding or other horizontal siding applications.
Can You tile over densglass?
Use 2-inch 10x10 glass-fiber mesh tape (not paper tape) at the corners and wherever DensShield butts into regular gypsum board outside the shower. Joints to be covered with tile should be skimmed with the same latex-modified thinset mortar or Type 1 mastic that will be used to set the tile; otherwise, skim the joints with setting compound.
Can densglass get wet?
Subsequently, question is, can DensGlass get wet? DensGlass Sheathing is resistant to normal weather conditions, but it is not intended for immersion in water. Cascading roof/floor water should be directed away from the sheathing until appropriate drainage is installed. Avoid any condition that will create moisture in the air and condensation on DensGlass Sheathing. What is waterproof drywall called?
How much does a sheet of densglass cost?
How much does a sheet of DensGlass cost? Drywall Sheets. Everyday Low Price $19.99; 11% Mail-In Rebate Good Through 2/29/20: $2.20: Can DensGlass get wet? DensGlass Sheathing is resistant to normal weather conditions, but it is not intended for immersion in water.
What is the fire rating on DensGlass?
0/0DensGlass Sheathing is manufactured to meet ASTM C1177. Flame spread and smoke develop rating of 0/0 when tested in accordance with ASTM E84 or CAN/ULC S102. This product contains fiberglass facings which may cause skin irritation.
Can you fire tape DensGlass?
DensGlass Sheathing is noncombustible as described and tested in accordance with ASTM E136 or CAN/ULC S114. 5/8” (15.9 mm) DensGlass® Fireguard® Sheathing is included in a variety of UL and ULC listings and other designs in the GA-600 Fire Resistance Design Manual.
Can DensGlass be used as structural sheathing?
DensGlass panels also protect and help stabilize structural framing. DensGlass Sheathing is extremely resistant to rippling, buckling and sagging, even under humid conditions — which makes it particularly suitable for soffits.
What is dense glass sheathing used for?
Densglass sheathing creates an ideal, flat surface to work on thanks to its stability and durability. Densglass sheathing is an ideal choice for your exterior walls, thanks to its structural properties. It is often used in insulation, finishing systems, as well as cladding, and stone veneer applications.
Is DensShield fire rated?
5/8( (15.9 mm) DensShield® Fireguard® Tile Backer is UL and ULC classified as Type DS and included in numerous assembly designs listed by UL and ULC for hourly fire resistance ratings.
What is the difference between DensGlass and DensShield?
2:3117:53DensShield vs Drywall: What's the Difference? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt sounds a little more Hollow. So drywall is not nearly as dense of material as the dense shieldMoreIt sounds a little more Hollow. So drywall is not nearly as dense of material as the dense shield all right so let's take a look at some other characteristics of these products.
Can you use DensGlass for exterior sheathing?
0:122:14GP Densglass Gold Exterior Sheathing Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis product is basically a 5/8 inch. They call it a type X which means it's fire resistant gives aMoreThis product is basically a 5/8 inch. They call it a type X which means it's fire resistant gives a longer fire rating. And this is basically a sheetrock. Product it comes in quite a few different
Is DensGlass a drywall?
DensGlass 5/8-in 4-ft x 8-ft Mold Resistant Moisture Resistant Regular Drywall Panel.
Can you put stucco on DensGlass?
You can install stucco over DensGlass for a long lasting finish. DensGlass exterior sheathing is a paperless board that prevents moisture wicking and the interior of your home from becoming exposed to the elements.
Is DensGlass fire retardant?
DensGlass Sheathing adds performance and durability to a wide range of fire-rated and non-fire-rated building assemblies. Dens® Solutions are industry trusted, high-performing fiberglass mat gypsum panels suitable for your wall, roof, ceiling and floor projects.
Can DensGlass be used on interior walls?
With their designed-in strength and moisture resistance, Dens® panels, when used on interior walls, deliver dimensional stability, moisture resistance and the highest level of performance for mould resistance under ASTM D3273 test method.
What is the difference between DensGlass and DensDeck?
DensDeck may be used above vertical membranes DensGlass Sheathing is appropriate for finishing the rest of the vertical surface above the membrane, but DensDeck Roof Board could also be used, so there's only one substrate material to deal with.
What is Densglass Made Of?
Densglass is made from recycled glass. The material is manufactured using a process called molten-in place recycling. This process uses an induction furnace to melt the glass together. Because it has been melted twice, the insulation’s density and strength are greatly increased over traditional fiberglass insulation products
What Types of Densglass Sheathing are There?
There are several types of dens glass sheathing including the following:
Benefits of Using Densglass Sheathing
This type of insulation is made from recycled glass. It can provide an R-value of up to 12 per inch. Therefore, this product has very good thermal performance. It also provides moisture resistance and sound dampening abilities making it suitable for use indoors or outdoors in various applications.
Frequently Asked Questions
Yes. Densglass sheathing can be plastered over to create a smooth surface for interior or exterior applications which is necessary before painting, applying stucco or siding materials.
Applications That Are Not Recommended for Densglass Sheathing
Densglass is an excellent type of insulation to incorporate into your home but it’s not suitable for all applications.
Conclusion
Densglass sheathing is an excellent type of insulation to consider adding to your home whether you are looking for increased energy efficiency or protection from the elements. This type of insulation has been manufactured using recycled glass. It also offers many benefits including cost-effectiveness, corrosion resistance, and durability.
How wide is densglass?
Use appropriate board orientation for specific fire assemblies and shear wall applications within this document, other reference documents or as required by designing authority. The framing width shall not be less than 1-1/2” (38 mm) wide for wood framing and 1-1/4” (32 mm) for steel framing. Framing members shall not vary more than 1/8” (3 mm) from the plane of the faces of adjacent framing.
What is densglass sheathing?
DensGlass Sheathing is lightweight and easy to handle. It can be cut and fastened with standard drywall tools and fasteners. The product is much easier to work with than cement board, fiber cement sheathing or magnesium oxide sheathing which tend to be heavy and brittle.
How long is DensGlass Sheathing warranty?
DensGlass Sheathing is covered by a 12-month limited warranty against delamination and deterioration for exposure to normal weather conditions, a five-year limited warranty against manufacturing defects and a 12-year limited warranty against manufacturing defects when used as a substrate for architecturally specified EIFS. For a copy of the limited warranty, visit our website at www.buildgp.com/warranties.
What is Denselement Barrier System?
The DensElement™ Barrier System with AquaKOR™ Technology integrates a water-resistive and air barrier (WRB-AB) directly into the exterior wall assembly. This eliminates the need for building wraps, peel-and-stick membranes, or fluid-applied membranes to the field of the sheathing. For additional information on the DensElement™ Barrier System, visit www.denselement.com.
Is Densglass fireguard combustible?
DensGlass Sheathing is noncombustible as described and tested in accordance with ASTM E136 or CAN/ULC S114. 5/8” (15.9 mm) DensGlass® Fireguard® Sheathing is included in a variety of UL and ULC listings and other designs in the GA-600 Fire Resistance Design Manual.
Is Densglass Sheathing good for soffits?
DensGlass Sheathing is extremely resistant to rippling, buckling and sagging, even under humid conditions—which makes it particularly suitable for soffits. In actual tests, DensGlass panels exceeded ASTM C1396 standards for humidified deflection by a factor of five times over the standard for paper-faced gypsum sheathing.
