Asphalt repair cost per square foot
| Type | Average cost per square foot |
| Cold patch | $2 – $4 |
| Hot patch | $2 – $5 |
| Saw cut | $4 – $12 |
| Infrared | $2 – $6 |
Full Answer
How does infrared asphalt repair equipment work?
Infrared asphalt repair equipment is essential for professional asphalt contractors who need a fast, efficient and low cost method for repairing asphalt. By using an asphalt infrared heater, you can re-use the existing asphalt and save money by only using a fraction of new asphalt hot mix.
How much does infrared paving repair cost?
While more expensive than patching, infrared repair is more cost effective than full replacement or large patch jobs. It ranges between $100 and $250 depending on the size of the pavement being fixed. Infrared repair can help to restore your paving and eliminate its defects. The infrared lighting heats the damaged surface, helping to remove it.
How much does it cost to fix a cracked asphalt driveway?
Asphalt crack repair costs $0.50 to $3.00 per linear foot. Depending on the repair method, asphalt repairs cost $2 to $12 per square foot. An additional service fee of $100 to $250 applies to all asphalt repairs. *A minimum service fee of $100 to $250 applies.
How is asphalt damage treated?
An infrared heater is placed above the damaged asphalt area and is heated for about 5-10 minutes. This heating time may vary depending on the existing aggregate, the season, and the depth of the damage. More extensive damage takes longer to treat. Once heated, the area to be repaired is raked, removing loose and failed aggregate.
What is infrared asphalt patching?
Infrared asphalt repair, or IRR, is a fairly simple technique used to repair road damage, among other applications. The infrared process requires an infrared heater to warm the damaged asphalt to a malleable state, then new asphalt is added, and the two combine seamlessly.
How much does it cost to fill cracks in asphalt?
Fixing cracks or small holes can be as low as $100 to $300. But major repairs that require asphalt resurfacing might cost as much as $3,600. If the pothole or crack is small, you could fix it yourself. In that case, you might pay between $20 and $40 for a 50-pound bag of asphalt solution.
How much does it cost to saw cut asphalt?
On average, you can expect to pay anywhere from $4-$12 per square foot for saw cut patching work, depending on the total workload and myriad of other regional factors.
How do you fix hot asphalt?
1:583:51Once you pour the contents. Into the hole you're going to use your board that you place the oil onMoreOnce you pour the contents. Into the hole you're going to use your board that you place the oil on you're going to spread the contents. Throughout the area that needs to be filled.
How much does it cost to seal cracks in driveway?
You may be surprised at how affordable this process can be. The national average cost for sealing your driveway is $305, while the typical price ranges from $176 – $444. The least you can expect to pay is around $110, while the most you can expect to pay is about $1,230.
How much does crack sealing cost?
Typical costs for crack sealing can range anywhere from . 35¢ to $1.00 per linear foot depending on materials and methods used.
How do you cut asphalt without a saw?
Use a broom to sweep debris off the asphalt. Sweep it off to the side so you can easily mark your cut lines and make your cuts. Using an electric chipping hammer is a good method of cutting asphalt when you need to make a series of shorter straight cuts or cuts that aren't straight.
How do you cut and patch asphalt?
1:495:55The first step of this process is to saw cut around the perimeter of the damaged. And affected. AreaMoreThe first step of this process is to saw cut around the perimeter of the damaged. And affected. Area then the crew will take out any damaged asphalt.
How do you remove asphalt driveway yourself?
Removal. Asphalt driveway removal can be accomplished using a jackhammer to break up the asphalt or even a circular saw to cut the driveway into small pieces. The best way to remove asphalt, however, is with a larger piece of equipment, such as a Caterpillar 303 excavator from a rental center.
How long do asphalt patches last?
Disadvantages Cold Mix Asphalt Temporary – Cold mix asphalt should only be used in temporary situations, including patches or filling in small cracks during the winter. Cold mix asphalt is only designed to last a season or two at most before being replaced by a more permanent fix.
Can you torch cold patch asphalt?
One of the tricky parts of winter asphalt repair is getting a good bond between your repair and the original surface. Fortunately, you can heat the original asphalt with a torch. This action should warm the asphalt enough to bond with your emergency repair. From there, you can add the crack sealer.
What is the difference between cold patch and hot patch?
Hot mix asphalt is best for filling cracks and potholes in warm dry weather. Cold patch products, on the other hand, are well-suited for installing in cooler weather. For this reason, many asphalt sealcoating contractors decide to use cold patch asphalt as a temporary solution until the weather warms up.
How much does it cost to patch asphalt?
Asphalt patching cost. Asphalt patching costs $50 to $300 on average, depending on the size and repair method. The cheapest way to repair an asphalt driveway is with cold-mix asphalt, which costs $2 to $4 per square foot. Hot-mix asphalt repairs are more permanent and always require professional installation.
What is the best way to repair an asphalt driveway?
Depending on the driveway’s age and the level of damages, asphalt driveway repairs include either patching, resurfacing, or repaving. A paving contractor should inspect the asphalt pavement and foundation conditions to provide the best solution.
What to do if your asphalt is not level?
If the asphalt surface is no longer level and has extensive cracks or holes, hire a paving professional. Hire a contractor or smaller company for minor asphalt repairs. Larger asphalt companies typically do resurfacing or repaving jobs only.
How much does it cost to repair a sinking driveway?
Repairing a sinking asphalt driveway costs $2 to $5 per square foot to fill and level small surface areas. Replacing sunken sections costs $4 to $10 per square foot for driveways with foundation issues. Hire an asphalt repair specialist to diagnose the problem.
How much does it cost to fix a pothole?
Pothole patching costs $25 to $40 per pothole plus $100 to $250 for bringing out the machinery and crew.
How much does it cost to replace a garage apron?
Asphalt garage apron repair costs $2 to $5 per square foot to fill and level the sunken pavement. Replacing a 2-car (10’x20’) garage or driveway apron costs $800 to $2,000 on average or $4 to $10 per square foot and is a more permanent solution.
What is infrared asphalt repair?
Infrared asphalt repair involves heating the existing asphalt material until it’s soft. Then, new or recycled asphalt mixes in easily to the softened substance. It’s become an increasingly popular mode of repairing asphalt because it’s easy, environmentally friendly, and requires minimal downtime after the process is finished.
How long does asphalt last?
When well maintained, an asphalt surface should last up to twenty years.
Why is asphalt so popular?
There are multitudes of reasons why asphalt has remained a popular paving solution for decades: it’s easy to apply, durable, and extremely cost-effective. However, there comes a time in any residential or commercial property owner’s life when asphalt issues arise. Whether it is cracking, potholes, or an exposed utility hole cover, ...
Can infrared repair asphalt?
While infrared asphalt repair is an extremely handy solution, it’s not a catch-all for every pavement problem. There are several ways that the process is used to patch smaller areas of asphalt. Infrared asphalt repair is best used for:
Can recycled asphalt be used in infrared?
Recycled asphalt can be used in the infrared asphalt repair process, reducing the need for new asphalt materials. It doesn’t require disturbance of existing asphalt surfaces, so there is minimal impact on the earth. The process is incredibly streamlined, so it requires fewer resources and time to complete the repair.
Can you use infrared on asphalt?
Since infrared asphalt repair is already a surface-only solution, it can cause further damage to degraded subsurfaces. It cannot be used on oxidized or raveled asphalt surfaces because the new asphalt won’t bind with the existing structure.
Is infrared asphalt good for potholes?
Like any other construction process, infrared asphalt repair does have some drawbacks; however, there are very few. While the process is perfect for patching small surface-level potholes and other minor imperfections, it’s not a catch-all solution for more severe issues. Let’s take a look at some of the limitations of the infrared asphalt repair process:
How long does it take to heat asphalt?
An infrared heater is placed above the damaged asphalt area and is heated for about 5-10 minutes.
How long does it take for asphalt to fail?
Infrared repair can be used to prevent existing damage from worsening, but areas with serious structural issues will likely fail again within 12-24 months of repair.
What is rejuvenator asphalt?
A rejuvenator is added to the remaining aggregate, replenishing oils lost through age and oxidization. New asphalt is added and mixed, ensuring the asphalt is graded to the proper level. Once mixed, the area is compacted with a multi-ton vibratory roller or plate, creating a seamless patch.
What is the best way to protect asphalt?
Having a solid pavement management plan is the best way to protect and extend the life of your asphalt. As your pavement ages and more critical asphalt repairs become necessary, using our infrared repair service is an efficient, cost-effective solution.
Is infrared asphalt repair more cost effective?
With fewer raw materials needed, this method of asphalt repair is more cost-effective. Infrared repair is also a more time-effective process than other repairs, as it takes less time to patch and the resulting repair can be driven on almost immediately.
How much does it cost to repair infrared light?
It ranges between $100 and $250 depending on the size of the pavement being fixed.
How much does it cost to fix a blemish on asphalt?
It ranges between $100 and $250 depending on the size of the pavement being fixed. Infrared repair can help to restore your paving and eliminate its defects. The infrared lighting heats the damaged surface, helping to remove it. Then, new asphalt can be added in order to fix the blemish.
How much does it cost to fix a pothole?
While most homeowners pay $2,310, the the type of damage can vary project costs. Fixing potholes and cracks can be as low as $100 to $300 while major repairs requiring asphalt resurfacing can cost up to $3,000 or more. First, fixing paving can be a very labor-intensive task that can be extremely complicated if specific steps are not followed ...
Why is my driveway cracking?
Repairing. A driveway imbalance or caving can produce surface-level cracks due to lack of underlying support. This is important to consider since vehicle traffic can weigh heavily on the asphalt and worsen these issues. Simple repairs make the most sense when the damage is surface-level, or contained to a small area.
How long does asphalt last?
Finally, there will come a time when your asphalt needs complete replacement. A typical driveway, for instance, lasts about 20 to 25 years before this replacement is necessary. One sign to look out for are so-called alligator cracks, named after their resemblance to alligator skin.
When is it necessary to replace a driveway?
Replacement is necessary when the existing surface is badly deteriorated or the underlying gravel base shows signs of failing. Removal and replacement is also necessary if the proper drainage of the driveway cannot be achieved because the area is too flat. Help us improve this article.
Can you put asphalt over a pothole?
If your base is still sound, you can possibly install a new layer of asphalt over the old to resurface the existing area. When the cracks and potholes you find indicate larger issues, or they occur in more than one spot, resurfacing may make more sense. It does not take care of all underlying issues, but still extends the lifespan of the area.
Introducing the Infrared Asphalt Restorer
The infrared process heats the asphalt surfaces to a consistency which allows for a smooth and level asphalt repair on road surface defects, such as:
Asphalt repairs in 30 Minutes or less!
Even severely aged asphalt will soften when heated (about 290 deg. F, 140 deg. C) to the flow point of the asphalt cement. INFRARED heaters are able to evenly raise the temperature of the asphalt repair area without burning or destroying the serviceability of the pavement.
Benefits of Infrared Asphalt Repairs
Cost Effective - Since infrared repairs can be completed quickly, the cost of labor is kept to a minimum. There is also cost savings in raw materials. We can pinpoint exactly where the asphalt needs to be patched and use less materials.
Limitations of Infrared Asphalt Repairs
Failed Pavement - Raveled, alligator cracked or fatigue cracked asphalt will need to be repair in other ways. A new asphalt overlay or repairs to the base course may need to be done for a long term solution.