Why your washing machine is not filling with water
- Low water pressure in your area. Fully automatic washing machines need a strong water pressure to work. ...
- Check if the inlet hose is kinked. The inlet hose is at the back of the washer and its job is to supply your unit with water. ...
- Malfunctioning water inlet valve. Attached to the inlet hose is the water inlet valve. ...
- Malfunctioning lid switch. ...
- Conclusion. ...
Full Answer
Why is my Indesit washing machine not filling up with water?
This is a common cause of your appliance failing to fill on the ‘rinse’ cycle and will result in your Indesit washing machine stopping mid-cycle. On some newer Indesit washing machines this is indicated by using either a tap symbol or a flashing light, to advise there is a water supply issue.
What should I do if my Indesit washing machine empties under the sink?
If your Indesit washing machine empties into the waste system under the sink, please ensure that the connection to the sink plumbing is clear from any blockages; such as a build up of food deposit or fat.
What do the lights on my Indesit washing machine mean?
The most common are: Pre wash light flashing Indicates that the Indesit washing machine is failing to fill correctly. Check your fill hoses to make sure they are turned on correctly. It is also worth checking for any blockages, leaks or kinks in the fill hose pipe. Wash light flashing
Why does my Indesit washing machine smell?
There is a smell coming from my Indesit washing machine. There are a number of reasons that could cause your washing machine to smell. The most common causes are: Consistent washing at low temperatures – means that bacteria and undissolved detergents can build up, causing your machine to smell.
Why is my Indesit washing machine not filling with water?
It is also important to check the drain hose to ensure this is not blocked, kinked or bent as this can prevent the water draining out of your Indesit washing machine. If your appliance empties into a stand-pipe, ensure the drain hose is not pushed in by more than 4 inches.
Why is my washing machine not filling with water?
0:187:25Washer Won't fill? - Top 5 Problems and Fixes - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne is located in the end of the fill hose. And the other is inside the inlet valve itself if theMoreOne is located in the end of the fill hose. And the other is inside the inlet valve itself if the washer won't fill it could be that the screens are clogged. So take your fill hoses.
Why is my washer not filling with water?
Water Valves. If you are getting a flow of water through your hose but your washer is still not filling with water then the problem could be with your water valve. If you’re lucky the issue might simply be that the filter needs cleaning, be careful with your water valve filter though because many of them are very fragile.
Why is my hot water hose not coming through?
If your hose isn’t kinked or damaged but water is still not coming through then the problem could be with the pumping taps. The pumping tap s can sometimes get clogged with dirt preventing a flow of water through the hose, this is a more common issue with the hot water tap.
Why is my washing machine not filling with water?
If you’re lucky then your washing machine not filling with water could all be caused by a simple kink in your hose. This is a much more common issue than many people realise and is thankfully easy to fix, simply unkink the hose.
Why does my washing machine make a humming noise?
Washing machine making a humming noise when trying to fill. If your washing machine won’t take in any water at all, plus you can hear a humming noise (not normally present), check that both your taps are turned on, or that the water supply hasn’t been cut off in some way.
Why won't my washing machine take water?
Common causes of a washing machine not taking in any water is either a kinked fill hose where the appliance has been pushed into place without thinking of trapping the pipe, or the water tap has becoming faulty whereby you switch it on but the valve inside doesn't turn.
Does a washing machine fill on a rinse cycle?
Washing machine only fills on rinse cycle or specific point in wash cycle. If this is happening I suggest you test the water valve solenoids with a test meter first. if you have a hot and cold fill machine (rare these days) then if one of the valves or the water supply to one of the hoses failed you would get the situation where water would go ...
Does water fill up in a drum?
Water runs into the machine but never fills up in the drum. If you can see water running into the machine but the water level never rises inside the drum it could be siphoning straight out down the drain, make sure you have the waste hose set correctly see picture.
How to check if washer lid is tripped?
A pin or lever attached to the lid will activate the switch when the lid is closed. Unplug the washer and see if the switch is tripped by a lever or actuator when the lid shuts.
How long is a washer hose?
The fill hoses for your washer hook up to the main water supply for your house. They’re about four or five feet long and attach to the back of the machine at the water inlet valve. If your washer if not filling, start by making sure the faucet at the water-supply end of the hose is turned on. Next, inspect your hoses for crimps or kinks.
How to check water pressure in washer?
Thread the hoses back onto the water supply. Now remove the other end of the hoses from the back of the washer, place the ends in the washer’s tub or in a bucket, and turn the faucets on to check the water pressure. If you have un-kinked hoses that are tightly attached and with clean screens, and you have good water pressure, ...
How to inspect washing machine hoses?
How to inspect the hoses & screens on your washing machine: Before suspecting the hoses & screens, ensure that the faucets are turned on and that the inlet hoses are not kinked. Next, you should turn off the faucets and remove the fill hoses from the inlet valve. Inspect the screens that are part of the inlet valve, remove any debris that you find.
How to test a selector switch on a washing machine?
How to test the selector switch in a washing machine with a multi-meter: Disconnect your appliance from the power source before starting. Open your washer’s cabinet in order to locate and remove the selector switch. It is usually secured to the frame of the appliance.
How to test timer on washing machine?
How to test the timer control in a washing machine with a multi-meter: Before beginning, ensure that you have disconnected your appliance from the power source. Locate and remove the timer. You will need to remove all or part of your washer’s cabinet.
How do washing machines connect to water?
Washing machines are connected to the household water supply by fill hoses. These hoses are typically 4-5 feet in length and often will have a plastic or wire mesh screen inserted into the end of the hose that attaches to the faucet. The screen prevents sediment from entering the water inlet valve, which is located on the back of your appliance.
Where is the water inlet valve on a washing machine?
Before beginning, ensure that you have unplugged your washing machine. The water inlet valve will most likely be found directly behind the hose connections. You will need to remove the rear panel in order to access it. Once you have located it, remove the valve in order to test it.
Where is the water level switch located?
It is usually found below the control panel but may also be found below the sump area below the tubs. Inspect the switch for any signs of wear, burning, cracking, or damage. If the air dome hose is not damaged or if your switch shows any the symptoms above, you may need a replacement water level switch. Back to Top.
How to change multimeter reading to zero?
With your multi-meter set to Rx1, touch the probes to the terminals of one button, you will be testing one button at a time. Press in on the first button, your reading should change from infinity to zero. Then you should press in on another button, this should change the reading back to zero.