Can be used in any model accepting an im4d icemaker?
Can be used in any model accepting an IM4D icemaker. The LED lights are activated by a motion sensor when the freezer door is opened. The sensor is located on the front of the icemaker. The LED lights are set to turn off after a period of time if no motion is detected in front of the sensor.
What if my Refrigerator calls for an im5d icemaker?
If the refrigerator calls for an IM5D icemaker (optional second icemaker), use that icemaker kit instead. Refrigerator - IM5D Accessory Icemaker Kit
Can I use an im4d in a im5d refrigerator?
*Check the model's product specifications. If the refrigerator calls for an IM5D icemaker (optional second icemaker), use that icemaker kit instead. Refrigerator - IM5D Accessory Icemaker Kit You cannot use the IM4D in a model that accepts an IM4 or IM4A, and vice versa.
How do I order the im4led or im6d?
Note: The IM4LED is only available as a kit. The icemaker body with LED light is not sold separately. The IM4D can only be purchased through a dealer. To order a kit from GE Appliance Parts, you can order the IM4LED by calling 1-877-959-8688 or you can order the IM6D kit: Order the IM6D online
How do I troubleshoot my GE ice maker?
0:242:11How to Troubleshoot Icemaker Issues - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck that the icemaker switch is in the on position. The green light should appear under the switchMoreCheck that the icemaker switch is in the on position. The green light should appear under the switch. When the icemaker is on next make sure that the icemaker.
How do I reset my GE ice maker?
Tips for Resetting a GE Ice MakerAdjust the feeler arm. If water doesn't immediately start filling in the reservoir, go to step 2.Press the on/off button.Keep the ice maker unplugged for 15 minutes.Turn the ice maker back on.
Why is my GE refrigerator ice maker not making ice?
If a GE ice maker isn't making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it's too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it's too cold, ice may build up and frost will prevent ejection.
Why is my ice maker not making ice but water works?
If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
How do I manually reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
Why is my GE French door refrigerator not making ice?
0:003:05Icemaker Troubleshooting - French Door Refrigerators - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst make sure the icemaker is turned on this adjustment can be made by a selection on the mainMoreFirst make sure the icemaker is turned on this adjustment can be made by a selection on the main controls display on most models. However. If you have a cafe model you must first select settings.
How do I get my GE refrigerator to make ice?
0:001:37French Door Refrigerator Icemaker Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to turn the icemaker off tap the icemaker or ice button depending on which modelMoreIf you want to turn the icemaker off tap the icemaker or ice button depending on which model refrigerator you have you may have to hold that button for 3 seconds to activate.
How do I test my ice maker water line?
1:012:46Refrigerator Not Making Ice? Inlet Valve Test, TroubleshootingYouTubeStart of suggested clipEnd of suggested clipUse a probe to touch one terminal of the coil you're testing and the second probe to touch the otherMoreUse a probe to touch one terminal of the coil you're testing and the second probe to touch the other terminal if the meter reading shows a result between 500. And 1500 ohms of resistance.
Why is my fridge not dispensing ice?
If your refrigerator display has been locked, it will not dispense water or ice. Press and hold the lock key on your display for 3 seconds to unlock. Make sure there is ice in the ice bin. Make sure the refrigerator doors are completely closed when trying to dispense.
Will a bad water filter cause the ice maker not to work?
A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser and could cause one or more of the following: Ice cubes to be thin or hollow. Odd tasting ice or water. Low ice production.
What is an IM4D?
The IM4D is an accessory icemaker kit that provides everything needed to install a icemaker into most icemaker-ready top freezer and bottom freezer models made since 2001*. If you have this kit and want to know if it will work with existing models, please check the label on the back of your refrigerator to ensure compatibility The kit includes the icemaker , bucket, fill tube, water valve, and installation instructions, as well as adapters and powers cords for multiple models.
When was the IM4LED discontinued?
About the IM4LED. Launched in 2017 and discontinued April 2019 (available until stock is depleted) Same as the IM4D, except that it is also equipped with LED lights to add bright lighting to the freezer. Can be used in any model accepting an IM4D icemaker.
How does the LED light work on an ice maker?
Can be used in any model accepting an IM4D icemaker. The LED lights are activated by a motion sensor when the freezer door is opened. The sensor is located on the front of the icemaker. The LED lights are set to turn off after a period of time if no motion is detected in front of the sensor.
How to order a GE IM4LED?
To order a kit from GE Appliance Parts, you can order the IM4LED by calling 1-877-959-8688 or you can order the IM6D kit: Order the IM6D online.
Can you use an IM4D in an SXS refrigerator?
Similar to the IM6D and can be sold in its place. The capacity of the ice bucket is 6 lbs. Cannot be used with SxS refrigerators. Dimensions: 9.5"W x 9.5"H x 14.5"D.
Need help?
Do you have a question about the GE IM4D or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other GE IM4D owners to properly answer your question.
About the GE IM4D
View the manual for the GE IM4D here, for free. This manual comes under the category Ice-cream makers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the GE IM4D or do you need help? Ask your question here
About This Product
Connect to WiFi for real-time feedback, optimized performance, alerts and more.
Schedule Service
Our online tools are here 24 hours a day to help you arrange the service you need.