Receiving Helpdesk

i joists

by Amya Ortiz Published 4 years ago Updated 3 years ago

What is an I joist used for?

step 2 How Far They Can Span

  • Joist engineering: Each manufacturer has engineering for each of their joist products. ...
  • The depth of the joist:
  • The length of the joist span: The joist span is the distance between the two supports.
  • Joist spacing: This is just a fancy way to say how close the joists are installed to each other. ...

More items...

Can I use joist from a computer?

Now any time you want to collect a payment using Joist Payments, just make sure the option to Accept Credit Cards and PayPal is enabled on the estimate or invoice you'll be sending to your client. Then just send the estimate or invoice to your client. Whether they open it on their mobile device or computer, they will have the option to pay you ...

How to build wood I joist?

Things You Will Need

  • Measuring tape
  • 2-by-6 or 2-by-8 lumber
  • Urethane-based construction adhesive
  • Caulk gun
  • 4-inch plastic putty knife
  • An assistant
  • 16d common nails
  • Hammer
  • Power saw

What is an I joist floor system?

  • Reduces floor “bounce”
  • Easy to install
  • A cheap solution for solving floor movement

Are I-joists cheaper?

I-beams are increasingly taking over in new residential construction. In new construction, it is cheaper to use engineered joists in some cases. For instance, it is possible to use half the number of I-beams compared to 2x10s since I-beams can span further with center support.

How strong is an I-joist?

Are I joists stronger than timber? I joists are specifically designed to offer strength in areas that dimensional lumber is incapable of. They can span greater distances, and are considered to be 50% stiffer than dimensional timber under traditional frame spacing.

How far can an I-joist span?

Span refers to the length of the I-joist. The L/480 table with a 40 per square foot live load and a 20 per square foot dead load with a depth of 11 7/8 inches will give you spans according to joint weight. With these factors, the lightest joist will have a maximum span of 17 feet, 8 inches.

What are I-joist used for?

I-joists are used extensively in residential floor and roof framing. They are ideal for long spans, including continuous spans over intermediate supports. Because I-joists are straight and true, it's easier for builders to avoid crowning and maintain a level framing surface.

Are I-joist stronger than 2x10?

Aside from providing longer spans, I-joist and TRIFORCE® floor systems are superior in strength and precision to solid sawn lumber. They are stiffer, lighter and more easily maneuverable. They also provide a bigger nailing surface to attach the floor membrane than the commonly used 2 x 10.

What can I use instead of an I-joist?

Options for Floor Framing. You can go the traditional floor framing method with dimensional lumber, otherwise known as 2×10's or 2×12's. Or, you can use a manufactured floor truss, which is typically made up of 2×3 or 2×4 members and are designed and built by your local truss plant.

Can I make my own I-joists?

1:224:40What is an I-Joist and How are They Made - Did You Know? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe veneers are laminated together 14 layers thick under extreme heat and pressure this laminatingMoreThe veneers are laminated together 14 layers thick under extreme heat and pressure this laminating oven is nearly 100 yards long and produces a continuous sheet of flange stock.

Can you drill holes in I-joists?

You can drill the holes anywhere along the length of the joist (first photo). If you have manufactured I-joists, you can drill holes up to 1-1/2 in. diameter almost anywhere in the web area (the area between the flanges).

How big of a beam do I need to span 20 feet?

What size beam to span 20 ft:- as per general thumb rule and guidelines, a 4 nailed 2×16 or 4-2×16 or 8×16 size of wood beam can allow to span 20 ft. Thus, for a 20 foot span, you will need atleast 4-2×16 or 8×16 size of wood beam.

Can you use I-joists for rafters?

Some builders use manufactured I-joists not only to support floors, ceilings, and flat roofs, but also in place of either sawn-lumber rafters or wood trusses to support pitched roofs.

Can I-joists be used as ceiling joists?

TJI® Joists can be used as ceiling joists. However, one must consider two design aspects that are not present in typical floor or roof joist applications. First, the top flange of the joists require bracing if there is no direct applied sheathing.

What is the main advantage of I-joist over conventional joists beams?

Invented in 1969, the I-joist is an engineered wood product that has great strength in relation to its size and weight. The biggest notable difference from dimensional lumber is that the I-joist carries heavy loads with less lumber than a dimensional solid wood joist.

Common I-Joist Applications

I-joists are used extensively in residential floor and roof framing. They are ideal for long spans, including continuous spans over intermediate su...

Fire Protective Assemblies For Wood I-Joist Floors

Learn about several options that enhance the fire performance of I-joist floor systems and comply with the 2012 and 2015 International Residential...

White Paper: Basis of IRC Membrane Protection Provisions

APA, AWC, and WIJMA jointly developed this paper that describes the history, background, and intent of the IRC provisions for fire protection of fl...

White Paper: Code Requirements For Prefabricated Wood I-Joists

APA, AWC, and WIJMA jointly developed this paper that describes the basic code recognition for prefabricated wood I-joists and the need for product...

White Paper: Fire Protection of I-Joist Floors With Factory-Applied Solutions

APA developed this paper that describes the basic fire protection requirements for prefabricated wood I-joists with factory-applied fire protection...

Product Specifications

Learn why LP SolidStart I-Joists are the right choice for your upcoming job.

How It's Made

Gorilla Glue Technology® helps build one of the strongest, stiffest sub-floors in the industry.

What Are I-Joists?

I-joists are structural engineered wood products used for framing floors and roofs. The consistency allows for solid performance and smooth ceilings.

What Are the Benefits of I-Joists?

I-joists have become a construction industry standard largely because they offer reliable strength, consistency, and engineered performance that can provide a better value than dimension lumber. But that’s just the start of their benefits.

What Is an I-Joist Used For?

I-joists are a go-to product for residential and multi-family construction projects because they’re available in common sizes for today’s construction projects. They can also reduce common mistakes and hassles to make: framing simpler, floors flatter, and homes perform to meet customer expectations.

How Are I-Joists Made?

I-joists consist of OSB web between two flanges, which are typically constructed of dimensional lumber or laminated veneer lumber (LVL) and joined by a durable structural adhesive. BCI ® Joists use Versa-Lam ® LVL for strength and durability while AJS joists have flanges made of machine stress-rated lumber.

What Are Common I-Joists Sizes?

I-Joists are manufactured in a wide range of depths ranging from 9 ½”-24″ and can be special ordered in lengths as long as 60 feet.

How Far Do I-Joists Span?

The answer to this question depends on many factors unique to your project. Download the BCI or AJS I-joist Specifier’s guide to see I-joist span chart for your specific application or learn more about the Boise Cascade software suite.

Joist Sizing Software

BC Calc ® is Boise Cascade’s proprietary beam span calculator. In just a few minutes, you can easily size joists, beams, columns, studs, and tall walls, then collaborate by sharing files in the cloud or sending links and files via email.

Structural solutions from floor to roof

Red-I Joists are lighter, faster, and easier to install than traditional framing. They are handcrafted for better floors, ceilings, and roofs to resist warping, twisting, and shrinking, preventing common issues like squeaks. I-joists are custom built to your specs and available in lengths up to 80 feet in parallel and tapered profiles.

Design flexibility, structural integrity

In tandem with open-web trusses and laminated veneer lumber, Red-I™ Joists give you the freedom to create unique, long-lasting, memorable spaces. Headquartered in Boise, ID, RedBuilt owns and operates four manufacturing plants, five design centers, and a country-wide technical sales team embedded and active in local communities.

How RedBuilt roof trusses helped support Utah businesses

Read about how RedBuilt roof trusses and structural reveals were used in 106 Exchange, a 60,442 square foot professional office space that now stands in South Jordan, Utah. Through hands-on, knowledgeable customer care, as well as close collaboration, a space was created true to the architects' vision using RedBuilt roof trusses.

Installing exposed trusses and solving a skylight dilemma

When the team at Worman Resources Inc., a development and construction company in Kelowna, British Columbia, started designing a two-story, mixed-use building in a trendy neighborhood in Kelowna’s South Pandosy District, they knew they wanted to include exposed trusses.

How RedBuilt roof trusses helped support Utah businesses

Read about how RedBuilt roof trusses and structural reveals were used in 106 Exchange, a 60,442 square foot professional office space that now stands in South Jordan, Utah. Through hands-on, knowledgeable customer care, as well as close collaboration, a space was created true to the architects' vision using RedBuilt roof trusses.

Installing exposed trusses and solving a skylight dilemma

When the team at Worman Resources Inc., a development and construction company in Kelowna, British Columbia, started designing a two-story, mixed-use building in a trendy neighborhood in Kelowna’s South Pandosy District, they knew they wanted to include exposed trusses.

How RedBuilt roof trusses helped support Utah businesses

Read about how RedBuilt roof trusses and structural reveals were used in 106 Exchange, a 60,442 square foot professional office space that now stands in South Jordan, Utah. Through hands-on, knowledgeable customer care, as well as close collaboration, a space was created true to the architects' vision using RedBuilt roof trusses.

When should I-joists be opened?

I-joists bundles should be opened when they are ready to be installed. I-Joists are not stable or capable of withstanding loading until they have been properly installed and fully braced. I-joists should be braced and nailed as they are being installed.

How big of a hole can I cut in a joist?

Some holes as large as 1 ½” in diameter can be cut in the I-joist web without consulting. However, I-Joist manufacturers should provide distances required between holes, between flanges, between final hole and bearing point, and between any other significant portions of the joist.

Can I-joists be cut?

Openings can be strategically cut in the I-Joist web to allow for wiring, ductwork, and plumbing. One I-joist can do the work of two or more solid joists. Between 15% and 20% of I-joists are now being built with solid-lumber flanges. Slightly reduce the space between joists, making the subfloor a bit stiffer.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9