What is hydro2 and how does it work?
HydrO2 is climate and temperature stable, and is an extremely effective long lasting water repellent that is resistant to nearly all acids, alkaline solutions, and solvents while offering significant UV (Ultra Violet) protection. HydrO2 is sold only in concentrated form which offers significant cost savings as well.
What is the best way to apply hydro2?
We recommend a spray bottle for fast and easy application. Spray fine mist of diluted HydrO2 on no more than 1/4 of vehicle before rinsing. Very little is needed and no overlap is needed.
Why choose carpro hydro2?
Save money, time, and create superior end results! Introducing the incredibly easy to use, effective, and revolutionary true wipe-less spray sealant! CARPRO HydrO2 is formulated with hydrophilic glass fibers, silicon polymers, and fluoropolymers that can be applied to all vehicle surfaces!
How do you use hydro2 to clean your car?
Surface must be well cleaned from soap residue and left wet with water. Dilute 1 part HydrO2 to 10 parts water. We recommend a spray bottle for fast and easy application. Spray fine mist of diluted HydrO2 on no more than 1/4 of vehicle before rinsing.
How can HydroFoam be used?
Directions by hand:Rinse vehicle.Apply a small amount of Hydrofoam directly to wet mitt and spread across one panel.Wash the panel as normal.Rinse mitt and panel.Move to next panel and repeat steps 2-4.Rinse the entire vehicle well.Dry any remaining water with Microfiber Madness Dry Me Crazy or Dry Me Crazy Jr.
Can you use CarPro reset in a foam cannon?
0:002:33Carpro Reset Foam Cannon Test! Will it foam? - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it in the foam cannon. And actually see if she'll fill them up and go from there there is noMorePut it in the foam cannon. And actually see if she'll fill them up and go from there there is no specific directions on the back of this or foam cannon.
How do you use CarPro HydrO2?
Dilute 1 part HydrO2 to 10 parts water. We recommend a spray bottle for fast and easy application. Spray fine mist of diluted HydrO2 on no more than 1/4 of vehicle before rinsing. Very little is needed and no overlap is needed.
How do you reset CarPro?
CarPro Reset – How to UseFill a wash bucket with 3 to 4 gallons of water and add approximately 1oz of CarPro Reset to the water. ... Before coming into contact with the car's paintwork you should always pre-rinse vehicle with free-flowing water to remove loose debris.More items...•17-Sept-2020
How often should you use CarPro Reset?
If you would like to use a topper, use CARPRO Reload or CARPRO EliXir as topper: use every 3-12 months, for special occasions or any time you like.
Does CarPro Reset remove wax?
This amazing formula uses Intelligent pH Surfactants to provide strong cleaning power, while remaining pH-neutral in use. Void of any sodium, lauryl sulfate, wax, polymers, silicones or gloss enhancers, CARPRO Reset Intensive Car Shampoo cleans and restores your coating's brilliance and performance.
How long does HydrO2 last?
Less wiping: With no more wiping and buffing waxes or sealants on and off the paint there is less chance of scratches. UV protection. Resistant to nearly all acids, alkaline solutions, and solvents. Durability: 3 months or more.
What is ceramic coating for car paint?
What is Ceramic Coating? Industry-grade ceramic coating is a chemical polymer solution that is applied to the exterior of a vehicle to protect it from external paint damage. Typically applied by hand, it blends with the paint of your car and creates an additional hydrophobic layer of protection.15-Jun-2019
Where does pan the organizer live?
19:0335:34Who is Pan?? MY STORY. - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause you pretty much organize. Everything around your life and you even organize people's livesMoreBecause you pretty much organize. Everything around your life and you even organize people's lives or at least help to do so and give them good tips and tricks and techniques. And all that good stuff.
Is CarPro Reset worth it?
It's a great cleaning, great foaming and great lubricity soap that is concentrated to only need one once for 4-5 gallon bucket. This makes the slightly higher price even out some to compare in price with other cheaper soaps. Best cleaning I've gotten out of a car soap that won't strip any LSP.
Are CarPro products good?
8:5135:34CARPRO Detailing Products : Brand Review (NEW 2019 products)YouTubeStart of suggested clipEnd of suggested clipThis one well of course it. Doesn't leave any finish. So this is a very clean product to use orMoreThis one well of course it. Doesn't leave any finish. So this is a very clean product to use or clean a PC you can use it also as a pre wash or a pre cleaner on your vehicle.
How good is CarPro?
Actually this is one of the better maintenance products I've used for my ceramic coating. I am pleased with the quality and amount of sio2. If you've been thinking of trying or looking for a si02 sealant you can't go wrong with CarPro Reload. Easy to apply, remove and polish up.
How to clean a car with foam cannon?
Directions with foam cannon: 1 Dilute 1:9 in foam cannon. 2 Foam surface (Do NOT allow to dry on surface). 3 Wash with mitt (as usual) rinsing after each panel. 4 When vehicle is finished rinse entire vehicle very well. 5 Remove any remaining water with Microfiber Madness Dry Me Crazy or Dry Me Crazy Jr.
What is Carpro Hydro2 foam?
Introducing the incredibly easy to use, effective, and revolutionary HydrO2 Foam! CARPRO HydrO2 Foam is a pH neutral surfactant designed to gently lift and remove dirt from solid surfaces in both a safe and effective manner. HydrO2 Foam was designed with a special lifting lubricant that not only allows the dirt to be lifted from the surface but also provides a lubricant to safely wash the paint when used as directed.
Does instant car release require a cure time?
Instant vehicle release: No cure time needed. Less wiping: With no more wiping and buffing waxes or sealants on and off the paint there is less chance of scratches. UV protection. Resistant to nearly all acids, alkaline solutions, and solvents.
What kind of mitt should I use for washing my car?
It’s recommended you use a Merino Wool mitt for best results. The CarPro Wool Wash Mitt or Aussie Merino Wool Wash Mitt would be perfect. Be sure to rinse thoroughly immediately after washing. Once the car is fully rinsed, remove any remaining water by either blowing with a dryer or with a waffle weave drying towel.
What happens when you rinse a car?
Once you’ve finished washing the car and have entered the rinse phase, an ultra water-repellant coating is immediately formed. During rinsing, an effect called “hydroelectric bonding”, is caused by the water pressure.
What is CarPro Hydrofoam?
CarPro HydroFoam is the ultimate product when you need to save time, but still want that CarPro shine. CarPro HydroFoam is one of the most advanced foaming shampoos on the market. How many products do you know that will leave a clean and coated surface after a simple wash?
Is CarPro Hydrofoam pH neutral?
CarPro HydroFoam is pH neutral and leave s behind a glossy, smooth finish. When CarPro HydroFoam is used with a CarPro Merino Wool Wash Mitt all surface dirt and debris is removed safely and doesn’t cause any washing induced swirls and scratches.
Can you wash your car with Hydro2?
You can now wash your car and coat with Hydro2 at the same time! The surfactants used in CarPro HydroFoam will gently lift and remove dirt from your paint, greatly reducing the risk of washing induced swirls. CarPro HydroFoam is the ultimate product when you need to save time, but still want that CarPro shine.
Can you use CarPro Hydro Foam on a hot surface?
Directions: First, you never want to apply CarPro HydroFoam in direct sunlight or on a hot surface. This will cause streaking that does NOT come off easily. Once you’re in a sufficiently shaded area, rinse the vehicle thoroughly. You should leave the surface wet and clean of any soap residue.
What is the best wash mitt for a car?
The CarPro Wool Wash Mitt or Aussie Merino Wool Wash Mitt would be perfect. Be sure to rinse thoroughly immediately after washing. Once the car is fully rinsed, remove any remaining water by either blowing with a dryer or with a waffle weave drying towel.
What happens when you rinse a car?
Once you’ve finished washing the car and have entered the rinse phase, an ultra water-repellant coating is immediately formed. During rinsing, an effect called “hydroelectric bonding”, is caused by the water pressure.
Can you use CarPro Hydrofoam on plastic?
CarPro HydroFoam is extremely versatile and can be used on many different surfaces; wheels and wheel wells, calipers, glass, and even plastic can benefit from a wash with CarPro HydroFoam. With no cure time necessary, your vehicle is immediately cleared for use as soon as you are done washing. CarPro HydroFoam should be diluted 1:9 ...
Is CarPro Hydrofoam pH neutral?
CarPro HydroFoam is pH neutral and leave s behind a glossy, smooth finish. When CarPro HydroFoam is used with a CarPro Merino Wool Wash Mitt all surface dirt and debris is removed safely and doesn’t cause any washing induced swirls and scratches.
Can you wash your car with Hydro2?
You can now wash your car and coat with Hydro2 at the same time! The surfactants used in CarPro HydroFoam will gently lift and remove dirt from your paint, greatly reducing the risk of washing induced swirls. CarPro HydroFoam is the ultimate product when you need to save time, but still want that CarPro shine.
How long does carpro hydro foam last?
Your vehicle will be left clean and shiny with an incredibly durable protective coating that will last as long as three months! CarPro HydroFoam is safe for use on paint, glass, plastic, wheels, calipers, wheel wells, and more.
What is carpro hydro foam?
CarPro HydroFoam is a revolutionary wash-and-coat product that allows you to cleanse your vehicle of dirt and grime, while adding a durable protective coating all in one easy step. Formulated using pH neutral surfactants, this innovative wash soap gently lifts dirt away from the surface where it can be safely rinsed away. Once the dirt is gone, the hydrophilic glass fibers and fluorpolymers go to work creating an incredibly durable silica shell resistant to acids, alkaline solutions, solvents, and other environmental contaminants for up to three months – now that’s a car wash soap!
What is carpro hydro2?
Introducing the incredibly easy to use, effective, and revolutionary true wipe-less spray sealant! CARPRO HydrO2 is formulated with hydrophilic glass fibers, silicon polymers, and fluoropolymers that can be applied to all vehicle surfaces! Paint, glass, plastic, convertible tops, wheels, calipers, and wheel wells are all easily within reach with HydrO2. HydrO2 was specifically formulated to save time and money for all the professionals and enthusiasts alike! This new innovative coat forms an ultra-water-repellent coating and is applied by simply spraying on and then rinsing off with only water!
How to get a well formed coating off a car?
Immediately rinse well with strong water pressure to produce physical shock and create a well formed coating. Repeat steps 5-7 on the next section of the vehicle rinsing well before moving to next section. Finish by "flood rinsing" the vehicle without a spray nozzle to push all the water off from top down.
What is UV protection?
UV Protection: Offers significant protection from sun damage, Chemical and fallout protection: Resistant to nearly all acids, alkaline solutions, and solvents. Concentrated value: Dilution of 1 part Hydro to 10 parts water. Beauty: Instantly revives the high gloss, deep luster, and smoothness of your paint.
Is hydro2 a water repellent?
HydrO2 is climate and temperature stable, and is an extremely effective long lasting water repellent that is resistant to nearly all acids, alkaline solutions, and solvents while offering significant UV (Ultra Violet) protection. HydrO2 is sold only in concentrated form which offers significant cost savings as well.
Does Instant Vehicle Release cure time?
Instant vehicle release: No cure time needed. Time saver: Maintains paint quickly with enormous time savings compared to any other paint protection product. Less wiping: With no more wiping and buffing waxes or sealants on and off the paint there is less chance of scratches.
Carpro Hydro2 foam dilution, Am I crazy?
Hello autogeekers, Happy holidays! I'm getting ready for a nice maintenance wash on my detailing board with wheels. I wanted to use my carpro hydro2 foam in a bucket so I can have more control and do it by section. I figure I could throw the leftover into my foam cannon.
Re: Carpro Hydro2 foam dilution, Am I crazy?
The directions clearly state that this can be used as a hand washing soap. Even if I put it into a foam cannon at 1:9 in the bottle the finial dilution coming out of the cannon would be far lower then that. What am I missing here? I would like to use the bottle I bought.
Re: Carpro Hydro2 foam dilution, Am I crazy?
I only use it premixed in a spray bottle. Not as a bucket wash. Spray panel, wipe it over with a mitt and then blast off. I only use it as a second wash on the wheels after they have been cleaned with the shampoo. I've only used it that way to wash my pickup truck like twice over the years.
Re: Carpro Hydro2 foam dilution, Am I crazy?
You can use as a soap but instead off buckets the soap is applied with a foam cannon or foam sprayer. I use a trigger foam sprayer then was with a wet mitt or sometimes I’ll spray soap on wash media. I do use a rinse bucket with grit guards. There’s plenty of lubrication this way, word of caution don’t use in sun.
Re: Carpro Hydro2 foam dilution, Am I crazy?
Wow both of those ways are clever. I do have a small Ik foamer I could use. Still ridiculous that they expect you to use three small bottles of shampoo for one 3 gallon bucket wash. False advertising to me.
Re: Carpro Hydro2 foam dilution, Am I crazy?
Wow both of those ways are clever. I do have a small Ik foamer I could use. Still ridiculous that they expect you to use three small bottles of shampoo for one 3 gallon bucket wash. False advertising to me.