What is the standard height of a bar counter?
In either case, when installing a bar from scratch, you need to know how high the counter should be. As a rule, bar countertops are measured at 42 inches. This is the standard height for professional bars, but it is not always necessary. You may want a slightly shorter bar in some cases, which would be around 36 to 38 inches.
What is counter height vs bar height?
Tips for Choosing Kitchen and Dining Sets
- What will you use the space for most often? ...
- How much space is present in the room? ...
- How much seating do you need? ...
- What vibe are you going for? ...
- Will this be a standalone dining room table or will you also be using this space to prep food, act as a buffet table, and more?
- What color palette do you like best? ...
What is the standard kitchen counter height?
Standard kitchen counter height is usually 36″. (Kitchen cabinets are usually manufactured at 34 1/2″ so that a 1 1/2″ countertop will reach the 36″ average kitchen countertop height.) And most people keep this standard height the same for their whole kitchen, regardless of the work they’ll be doing on and around those surfaces.
What is the best counter height for bar stools?
How do I choose the right height for my bar stools?
- Table Height: 18 to 23 inches from floor to seat. These can accommodate a dining table of 28 to 30 inches and they’re a great alternative to traditional dining chairs.
- Counter Height: 24 to 27 inches from floor to seat. ...
- Standard Bar Height: 28 to 32 inches from floor to seat. ...
- Extra Tall: 33 to 36 inches from floor to seat. ...
How wide should a bar counter be?
» Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide.May 30, 2020
How wide is a kitchen bar counter?
Countertop bars are 36 inches, and bartops are 42 inches. Forty-two inches is the most common, but different heights may suit your kitchen (or those who use it most) better. What is this? Twenty-four inches deep leaves enough room for eating, without being too difficult to reach across.Jan 1, 2021
How deep should bar counters be?
Not Too Deep It should be large enough to fit a sink and fixtures but not so deep you can't reach to the back. Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.
How wide is a breakfast bar worktop?
These worktops start at a width of 900mm up to a width of 1240mm - and larger sizes are available via our made to measure worktop service.
How wide should a kitchen breakfast bar be?
There is standard 47 inches or 119 centimeters breakfast bar that is perfect whether you will be seating just a couple or adding another set of bar stools to sit another two. 16 inches or 41 centimeters are available for breakfast bars for couples with minimum kitchen space.
How much space should be between bar and wall?
Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space. The builder should also plan the electrical outlets and lighting for the bar.
What is the typical overhang on a counter?
1½ inchesA standard countertop usually has an overhang of 1½ inches. Although some countertops may have a longer or shorter overhang, this number is generally the standard length for an overhang in homes. When utilizing an overhang for kitchen islands, the standard amount of overhang is typically 12 inches.Jul 28, 2020
What depth is a bar?
Standard depth of 24” for bar equipment. Stainless under bar equipment is commonly available from 12″ – 48″ wide, in 6″ increments. The bartender's aisle should be 31” – 37”. Bar tops range from 24″ to 30″ in depth.Feb 20, 2018
What are standard bar dimensions?
The standard bar height, on average, is 42 inches or 106.68 centimeters high, and either a 24 inches counter stool or, better yet, a typical bar stool that could go up to 32 inches would work perfectly for this height. The depth of a 42 inches high bar is 16 to 20 inches or 40.64 to 50.8 centimeters.
How big should a breakfast bar overhang?
The overhang of your breakfast bar should be between 8 inches and 15 inches. This measurement depends on the amount of space you have available to dedicate to your breakfast bar, the height of the people using it, and the type of material you are using for the counter.Sep 20, 2020
How wide should worktops be?
The standard kitchen worktop width is commonly recognised as 600mm. We have over 1000 kitchen worktops in our 600mm worktops range for you to choose from.
How much should a countertop overhang UK?
We recommend that your measurements allow for a 20-30mm overhang at the front and exposed edges of your worktop, along with a 3-4mm gap between your worktop and wall (to leave room for sufficient expansion and contraction). This is particularly important to consider if worktops are to be joined together.Sep 18, 2013