Which miter saw is better sliding vs fixed?
- Precise cuts- A miter is specifically designed for making accurate and angled cuts.
- Portable – Most of the miter saws are portable.
- Safe – Miter saws are safer to use as they have no kickback.
How to make a sliding miter saw at home?
- Keep the saw unplugged when not in use.
- Miter saws should be bolted to a stable work surface or securely clamped onto a miter saw stand.
- New miter saws are adjusted at the factory but vibration during transport can knock the saw out of alignment. ...
- Never clamp both sides of the board being cut.
What is the best sliding compound miter saw?
- BEST OVERALL: DEWALT 12-Inch Sliding Compound Miter Saw (DWS780)
- RUNNER UP: BOSCH Power Tools GCM12SD 15-Amp 12-Inch Corded Dual
- BEST VALUE: Metabo 12-Inch Dual Compound Miter Saw with Laser
- BEST CORDLESS: CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit
- BEST FOR BEGINNERS: Hitachi C10FCH2 15-Amp 10-inch Compound Miter Saw
Can you use a miter saw like a table saw?
It is possible to fit miter saw blades on table saw. But if you want the best result possible, you should not use a miter saw blade for a table saw, unless stated specifically in the product manual. Table saw blade are supposed to be thicker. Because miter saws are meant to run slower than table saws, it may cause burn on the wood.
How wide can a sliding Mitre saw cut?
Sliding miter saws are designed to expand the capabilities of the miter saw. The blade sits on a rail and slides across the board you're cutting. This will allow you to cut wider boards. Some sliding saws allow you to cut boards that are 12″ or even 16″ in width, which you couldn't accomplish with a normal miter saw.
Can a 12-inch miter saw cut a 6x6?
The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4x4 at a 45-degree bevel angle, nor could any cross-cut a 6x6. The capacities in the specs (page 36) are based on the widest and thickest pieces that could be cut laying flat.
Can a 12-inch miter saw cut a 4x4?
A 12” miter saw clearly has a bigger blade. This means that it can do longer cuts faster as well as wider cuts. The cutting capacity is so superior that even the cheapest 12” miter saws on the market will still cut through 4x4s faster and cleaner than the best sliding 10” miter saw.
Can you cut a 2x12 with a miter saw?
The biggest drawback of a miter saw is that the smaller (and cheaper) sizes can't cut completely through wide material, such as 2x10 or 2x12 boards, in one pass. Well, a sliding miter saw can make these cuts, but you'll spend twice as much for one.Apr 24, 2021
Can a 12 inch miter saw cut a 4x6?
Yes! A 12” miter saw can easily cut a 4 x 6 lumber. A 12 inch miter saw clearly has a bigger blade and has the capability to cut 4×6 lumber in a single pass.
Can you put a 12 inch blade on a 10-inch table saw?
The Blade Runner Twelve-inch blades are harder to find, and at a higher price typically at woodworking supply retailers. Theoretically, a 10-inch blade will fit on a 12-inch table saw, but the arbor -- or hole in the middle of the blade -- is typically smaller.
What is the advantage of a sliding miter saw?
They can quickly create bevels at any angle. Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.
What size saw do I need to cut a 4x4?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
What is the difference between a compound miter saw and a miter saw?
Compound cuts include both a bevel and miter. A compound miter saw adds the ability to make bevel cuts in addition to its mitering ability. You'll want to make sure you have this feature anytime you work with crown molding or other trim that gets installed on a wall.
Can you put a 10 blade on a 12 miter saw?
You can put your 10-inch blades on your 12-inch saw (assuming the arbor holes are the same size), but you cannot put 12-inch blades on a 10-inch saw. The 12-inch saw gives you greater versatility – with the larger blade, it's the hefty workhorse, and with the smaller blade, it's a master of precision.Feb 2, 2022
Can I use a miter saw on the ground?
A miter saw can be used on the floor, but it may be challenging to hold the board you are cutting level and in place. You can always buy or build a miter saw stand so you won't have a hard time to work with your miter saw on the floor.
How do you cut a wide board with a miter box?
0:044:29Cutting Wide Boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirectly against the soft. And then line up the teeth my blade. Against the cut line that I've drawnMoreDirectly against the soft. And then line up the teeth my blade. Against the cut line that I've drawn. I'll make that cut. And then keeping the board in place I'm going to grab a reference block.
What is a 12 inch miter saw?
The blades of a 12-inch miter saw are high-speed; that is why it will allow you to make different cuts even in a short time. You will see a variety of products available on the market. But if you require a massive project, you should look for the best item to fulfill all your needs and requirements.
Can a 10 inch miter saw cut 6x6?
You can use a 10-inch miter saw for cutting 6×6. Not every product comes with all these features. That is why you should look for it before buying an item for your workshop and the best result in your woodworking projects. In addition to this, you can quickly get good jobs from a 12-inch miter saw even with a hundred percent accuracy and efficiency.
Choose Your Saw Carefully
Before you actually start cutting the wide board with your miter saw you should know something. Always make sure you have selected the right type of saw for the job. Normally people use table saws to cut through wider objects.
Mark the Exact Length
After deciding the miter saw and its blade for the job the next thing to do is to make accurate marking. Every single project needs proper measurements because you will need to cut different pieces of the required size.
Ensure Proper Safety
After selecting the saw, a good saw blade and marking the piece right where you want to cut it. This next step is to ensure proper safety before starting to work on the project.
How to Cut Wide Boards With Miter Saw
Cutting wide boards with a miter saw might be easier than you think. However, you need to know the right technique in order to complete the task efficiently.
Some Additional Tips
Now that I have already mentioned a step by step method on how to cut wide boards with miter saw. I would like to give you a few more tips that can prove quite helpful during the project.
Frequently Asked Questions and Answers
A miter box may prove quite helpful for some projects like picture framing and stuff. However, I don’t recommend using a miter box for cutting a wide board. It is because the board size may be too large for the box to fit in. Therefore you can’t cut a wide board with a miter box.
Last Minute Thoughts
If you want to learn how to cut wide boards with miter saw then you are in the right place. I have covered this topic in as much detail as I could. I have mentioned the best way to cut wider boards with a miter saw without any issue at all.
How wide can a 12 inch miter saw cut?
Saw with the sliding arm can cut much wider although the maximum depth remains the same. For instance, a 12-inch sliding compound miter saw will cut 2 x 16 wood in 90 degrees (crosscut), and when set at 45-degrees it can cut up to 2 x 12 lumber.
What size is a miter saw?
Miter Saw Sizes. The size of the Miter saw denotes the diameter of the miter saw blade used. They are available in 8-inch, 10-inch, and 12-inches. There is even a 15-inch miter saw from Hitachi for those who need a really large and powerful saw.
What size miter saw should I use for crown molding?
Let’s say the crown molding that you are cutting is around 4 or 5-inches. In that case, I would recommend using a 10-inch miter saw. If, on the other hand, the crown molding is on the bigger side; such as around 6 or more inches, then you should use a 12-inch miter saw.
What is the difference between a miter saw and a smaller miter saw?
A miter saw with large sized blade (12-inches and above) can make wider and deeper cuts, while a smaller sized miter saw (10-inches and below) is more economical and easy to handle. Miter saws, like most saws, come in a variety of sizes. More specifically, the blades on the saws come in different sizes.
Why use a sliding compound miter saw?
And the reason that you want to use a sliding compound miter saw on especially wider pieces of material is because the sliding saw blade makes it a lot easier to maneuver around and accurately cut those large pieces of material. In any case, get a compound miter saw with dual bevel.
What size miter saw should I use for baseboards?
Miter saw for baseboards. Unless you are cutting very large baseboards, I would recommend sticking with a 10 or 12-inch miter saw. A 10-inch miter saw can very easily and very accurately cut 6-inch baseboards. However, if you already have a 12-inch miter saw, that is perfectly fine for cutting baseboards.
How much saw do I need to cut laminate flooring?
Laminate flooring can be on the tougher side, so I would recommend investing in a 12-inch saw simply for the extra cutting power that it offers.
How deep can a sliding miter saw cut?
Compared to a non-sliding miter saw, you can expect to see almost double the cutting capacity. You may cut up to 2 inches deep, and 12 inches when crosscutting wide boards and sheets. Sliding miter saws are really worth the extra bucks if you want to be able to work with a wider range of sheet sizes. Preview.
What size blades do miters use?
Miter saws with 10 inch blades continue to be the most popular size. But is it really a personal preference or just a forced choice on the part of the manufacturers? Let’s have a look at the 10 inch sliding miter saw cut capacity and performance when compared to 12 inch blades and non-sliding 10 inch blades.
What is the difference between a stationary and a sliding miter saw?
Sliding and stationary miter saws look very similar on paper but it’s the sliding feature that makes a world of difference between the two. Sliding miter saws let you tilt the saw head forward and backward which means you’re able to tackle thicker materials with them.
Can you crosscut with a 10 inch blade?
While a non-sliding miter saw may only let you crosscut a board 6 inches with a 10 inch blade, a sliding miter saw will let you cut almost twice as much. Of course, it depends on the blade whether you can do this in one clean cut or in two cuts starting from both ends. There are many 12 inch sliding miter saws available so why should you settle ...
Can you use a 10 inch miter saw to cut 2x4?
While the 10 inch blade on a sliding miter saw can get the job done, if the wood is really dense you might still need to make two cuts instead of one. You can also use a 10 inch sliding miter saw to cut 2×4’s at a 45 degree angle.
Can you use a 10 inch blade on a 5.5 inch board?
You can use a 10 inch blade to make right angle cuts on a 5.5 inch wide board. This means that you’ll have no problem working with 2×6 pieces of lumber. However, the thickness of the wood is not the only factor here. While the 10 inch blade on a sliding miter saw can get the job done, if the wood is really dense you might still need ...
Can you use a stationary miter saw for a stationary miter saw?
While you may find a stationary compound miter saw to be enough for small projects, you will need a sliding miter saw for cutting longer, wider, and thicker sheets. Considering that it can do everything a stationary saw can do and more, it might be a good idea to make it your primary tool.