What is the actual size of Trex decking board?
Trex ® decking is available in 12, 16 and 20 ft lengths, with 8 ft decking available on shelf in select stores. Calculations provided for boards installed at a 90 degree angle. If laying boards on an angle, an approximate increase of 15% may be required. Trex Transcend® and Trex Signature® railing is available in 6 and 8 ft lengths.
How thick are Trex boards?
Composite Decking Brands Dimention Solid boards Fiberon Thickness 0.93'x 5.25' 0.925 x 5.25' - Sanctuary TimberTech Length 20' Thickness 0.94' x 5.36' Trex Length 12'; 16'; 20' Popular Trending
What is the width of a Trex deck board?
Trex. Length. 12'; 16'; 20'. Thickness. 1" x 5.5" 0.82" x 5.5"- Select. Click to see full answer. Similarly, you may ask, what size are Trex boards? Actual Dimensions. Our square edge boards install traditionally like wood – with deck screws. 2 x 6 boards available in 12', 16', and 20' lengths.
What sizes does Trex wood come in?
Home > wpc > what sizes does trex wood come in Product Profiles Measurements qizhen Available Lengths: 12 ft (365 cm) 16 ft (487 cm) Can also be used for decking applications.
See more
What widths does Trex come in?
2.5" x 2.5" x 63" or 63 mm x 63 mm x 160 cm actual dimensions.
Do Trex boards come in different widths?
The actual Trex decking boards are available in 1 or 2 inch thick boards. The three main types of boards are the Fascia, Grooved Edge and Square Edge. The Fascia is available in either 8 inch or 12 inch long boards. The boards are 0.75 inches thick and 11.375 inches wide.
How wide are composite deck boards?
Composite decking size refers to the length and width of the boards used for deck building and repairs. Most manufacturers offer composite decking boards in 12', 16' and 20' lengths. The width varies by brand and style and can range from one to two inches thick and four to six inches wide.
What widths do decking boards come in?
Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
What is the widest composite deck board?
Standard-width decking is not the standard anymore. You can now choose wide (7.25″) or narrow (3.5″) widths, in addition to standard (5.5″)-width boards, to add a touch of the unexpected – and an element of style.
How far apart should Trex boards be spaced?
Important points about gapping All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.
Are Trex boards exactly 16 feet?
Trex Enhance Basics 1-in x 6-in x 16-ft Clam Shell Grooved Composite Deck Board.
What is the actual width of a 5 4 deck board?
5/4 Decking Actual Dimensions 1″ x 5.5.” If you use 5/4 decking, you are getting two-thirds of the board of a 2×6. Like getting a Big Mac without the middle bun, still decking just less. There are some trades off with this difference. Some are positive, and some are not.
How wide are Trex spacers?
The minimum required width-to-width gapping is 6 mm. When installing in temperatures below 4.5°C, Trex recommends 10 mm gapping. For docks and heavily wooded areas, Trex recommends a 10 mm gap as well. No gapping should ever exceed 13 mm.
Should I leave a gap between decking boards?
Determining Deck Board Spacing When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you're using decking that's already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn't been dried down or kiln dried.
Are wider deck boards better?
Thicker deck boards allow for more space between your deck joists — which means you'll likely need fewer joists for your build. Fewer joists can mean less labor and lower upfront material costs.
How thick is Trex decking?
The actual Trex decking boards are available in 1 or 2 inch thick boards. The three main types of boards are the Fascia, Grooved Edge and Square Edge. The Fascia is available in either 8 inch or 12 inch long boards. The boards are 0.75 inches thick and 11.375 inches wide.
How long is a square edge board?
Actual Dimensions. Our square edge boards install traditionally like wood – with deck screws. 2 x 6 boards available in 12', 16', and 20' lengths.
What is the width of a composite deck?
Most manufacturers offer composite decking boards in 12', 16' and 20' lengths. The width varies by brand and style and can range from one to two inches thick and four to six inches wide.
How much does Trex decking weigh?
Trex is one of the leading brands in the market for making wooden fiber composite decking. Trex weight varies from 60 – 70 pounds per cubic foot. Trex 12-foot long decking board can weigh around 27 – 28 pounds. This 12-foot longboard is 5/4 by 6 in size.
What is Trex decking?
Composite decking is a popular material used for decking. Trex is durable, high-performance composite decking. It retains its beauty for decades with minimal upkeep — thanks to the protective shell that resists stains, scratches, fading, and mold. If you are completing a DIY deck, edging, and stairs, Trex makes it easy with hidden fasteners as ...
How long is Trex decking warranty?
Among the many benefits of Trex is their industry-leading 25-year warranty. It requires that it is installed according to the manufacturer’s directions. There are more benefits of using Trex composite decking.
What is Trex made of?
This decking material is said to be environment-friendly, as it is made of a composition of wood fibers, recycled plastic, and bonding agents.
Why is composite decking better than wood?
Composite decking promotes a lower usage of wood in building areas. As well, recycling plastic waste helps to save nature and maintain the ecosystem.
Why do Trex floors get rotten?
The Trex materials like wood fibers and plastic make that more durable in every weather. Wood floors get rotten if the water stays on them for a long time.
Does Trex decking crack?
Wood gets cracked in direct sunlight or causes flakes to appear. Those splinter gets in the skin and creates pain. But Trex decking materials do not get cracked.
What is Trex decking?
For more than 20 years, Trex has developed, defined and perfected timber-alternative decking. Our high-performance composite decks combine fade-resistant beauty with outstanding durability. Whether you’re planning a breakfast nook in your backyard or rooftop retreat, Trex makes it simple to create the kind of outdoors your life demands.
How many joists do you need for a Trex deck?
The joists must be spaced on center according to the chart below. Be sure that joists are level and plumb. Trex® decking must span at least three joists. For heavy items such as hot tubs, planters, etc., consult a local building engineer or inspector for span recommendations. If you want to minimize the appearance of joists through the spaces between boards, paint the top of your joists black.
How long is the warranty on a deck?
Protected by a 25-Year Limited Residential Warranty Low maintenance—never needs painting, oiling or staining Resists mould, scratching and fading unlike other decks Natural wood-grain finish in several rich colours Easy to install without any special tools
What is the width to width gapping?
The required width-to-width gapping is 6 mm.
How thick is a sandpaper?
17 mm in thickness x 184 mm in width x 3660 mm in length
Do you need to gap Trex decking?
You must gap Trex® decking, both end-to-end and width-to-width. Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex deckingboards. Gapping also allows for the shrinkage of the wood joist system.
How to contact Trex?
At trex.com, you can request information, register your warranty, and reach out to customer service representatives who can answer even more questions. » Call 1-800 -BUY-TREX (1-800-289-8739) and speak to a Customer Loyalty Advocate who can answer your questions. Refer to www.trex.comfor up-to-date installation and technical documents that may not be found in this printed guide.
Who makes Trex outdoor kitchens?
Trex®Outdoor Kitchens™is manufactured and sold by CT Acquistions LLC., under a Trademark Agreement with Trex Company , Inc. A Limited Warranty is provided by the manufacturer.
How to reduce static electricity on Trex deck?
Both are effective in greatly reducing static electricity on Trex decking surfaces. Apply full strength, using a mop on a dry decking surface, and allow to dry; no rinsing or diluting needed. Products are non-toxic, non-flammable, non-staining (will not change the color of decking surface), completely biodegradable, and safe to use. Product is water-based and may require a second application after rain or other weather conditions. Over a period of time, the effect of static will dissipate naturally on the decking surface. See link for more information on product:
Why do you need to gap Trex decking?
Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex decking boards. Gapping also allows for shrinkage of the wood joist system.
How do I clean a deck board?
Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface. Issues with Concrete, Cement, Mortar, or Stucco Dust When working with cement, concrete, mortar, or stucco, protect the decking as much as possible in order to not get dust particles on the decking surface. These particles, once they get hot or wet, can cause a reaction on the decking surface and are very difficult to remove. If particles get on the decking surface, Trex recommends using Sakrete™ Concrete Dissolver (www.sakrete.com/products/ concrete-dissolver). BE SURE TO FOLLOW MANUFACTURER'S INSTRUCTIONS. Hard Water Staining Hard water is water with high amounts of mineral deposits like lime, silica and calcium. When the water dries, deposits are left behind, leaving unsightly spots on surfaces. This is not a defect of Trex products but an issue with the water itself. Generally, these deposits can be cleaned with white vinegar on decking surfaces. Rinsing is required, so care should be taken to not use hard water for this purpose. If hard water must be used, dry with a cloth or use a blower to dry surfaces. In some cases a deck brightener product may also be used to help clean hard water stains. Chalk Lines Most colored chalks are permanent and may discolor the surface. Use only Irwin Strait-Line®Dust-Off Marking Chalk (purple), available at www.Irwin.com.
Who makes Trex spiral stairs?
Trex®Spiral Stairs™ are manufactured and sold by M. Cohen and Sons, Inc., d/b/a The Iron Shop, under a Trademark License Agreement with Trex Company, Inc. A 25-year Limited Warranty is provided by manufacturer.
How to clean embossing pattern?
Dirt and Debris The affected area should be sprayed off with a hose to remove surface debris. Use warm soapy water and a soft bristle brush to remove dirt and debris from the embo ssing pattern. Using a Pressure Washer (General Cleaning Issues)