Receiving Helpdesk

how to use kilz 2

by Baby Schroeder Published 4 years ago Updated 2 years ago

Only apply if surface, air and product temperatures are between 50°-90°F (10°-32°C). Stir thoroughly before and occasionally during use. Brush – High quality Nylon/Polyester. Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.

Full Answer

Can you use Kilz as a ceiling paint?

While you can leave it unpainted until it dries, it is not recommended to leave it on your ceiling without applying any coat of paint. So, Kilz should not be used as ceiling paint, but rather as a base for the paint. Why is Kilz not recommended for flooring?

What do I use to get Kilz off my skin?

  • Turn the water in your sink to warm, then hold the clothing with the wet primer underneath the stream.
  • Wash the area with warm, sudsy water.
  • Scrape off the dry primer with your fingers or a spoon.

Is Kilz a good primer?

Yes, Kilz 2 can be used for exterior painting. But it is rarely your best choice as an exterior primer. While Kilz 2 is a good primer, it is a general purpose primer. This means that different situations will call for a specialty primer, here are a few of my recommendations.

Can I use Kilz to paint over mold?

You can paint over the mold using Kilz. The product is applied directly to the mold and mildew-prone walls. However, kilz does not eradicate but only covers them. Hence, better to remove the molds beforehand. The covered mold cannot harm after application. Kilz prevents mold from further appearing.

How long after Kilz 2 Can you paint?

one hourHow long do you have to wait to paint after using Kilz? Usually, after using Kilz, you will have to wait one hour for it to dry. The primer must be completely dry before you apply a coat of paint on top of it, or else it will not adhere properly to the surface.01-Nov-2021

How many coats of Kilz 2 primer Do I Need?

As long as the primer applies uniformly over the previous color, then one or two coats should be sufficient.12-Feb-2021

Is Kilz 2 a good primer?

Kilz 2 is a great general purpose primer and should solve most DIY Painter's priming issues. It's a great primer to keep on hand for small projects, getting rid of smells, priming small drywall repairs, as well as water and grease stains.26-Jan-2022

How do you apply Kilz?

3:084:56How To Paint Over A Stain With Kilz Premium Primer Paint - YouTubeYouTubeStart of suggested clipEnd of suggested clipI don't have to go all the way up or all the way over I can just lead it to a side there. Okay asMoreI don't have to go all the way up or all the way over I can just lead it to a side there. Okay as you can see I've already primed. The entire wall there where the stain was.

Should you sand after priming?

Sanding after applying primer should help keep your surface as smooth and flat as possible, eliminating brush marks, or extra little globs. Also when painting, like others have pointed out, can raise little fibers from the drywall, going over the surface with a sheet of sandpaper can help get rid of those lose fibers.05-Nov-2016

How long does kilz 2 take to dry?

30 minutesDries to the touch in 30 minutes. Can be recoated or topcoated in one hour with latex or oil-based paint. Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.

What happens if you paint over primer too soon?

Adding coats of primer or paint too soon could cause the paint to wrinkle. For the best results, spray all your primer coats on the piece within an hour. If you don't have the time, wait at least 48 hours to apply a new coat. The length of time you allow the primer to dry varies by the brand.

What's the difference in Kilz and Kilz 2?

Kilz has a viscosity rating of between 95 and 105 KU. Kilz 2 has the same viscosity of Kilz Ceiling Paint, a purposely thick product. Kilz 2 mixes well and spreads well, but not exactly smooth. The only difference between it and the bin, is that the bin drys much faster.30-Jan-2020

How many coats of Kilz primer do I need?

two coatsHow many coats of Kilz will I need? Usually one coat of Kilz will be enough to cover any texture issues, stains, previous colors, and odors. For darker colors, it is recommended to use two coats of Kilz. It will also be helpful to tint your Kilz primer, which can speed up the process too.11-Sept-2019

Can you use Kilz 2 on cabinets?

KILZ 2 All-Purpose Interior/Exterior Primer This primer seals almost all surfaces, and can cover stains and previous colours, making it one of the best primers for oak cabinets. It's low odour and resistant to mildew.20-May-2021

Do you have to wash walls before Kilz?

Secret #2 – Prep Work Leads to the Best Work: Ensure that the surface is clean and free of dust, wipe down with a damp cloth if needed and allow to dry. You're now ready to apply primer over the stain using a brush or roller.10-Jun-2019

Can you apply Kilz with a roller?

Kilz recommends using a high quality synthetic brush, a synthetic roller between 3/8 and 3/4 inch nap (use a smaller nap for smooth surfaces and a larger nap for rough surfaces), or an airless sprayer fitted with a . 015 to .12-Mar-2022

How do you put Kilz on a wall?

To seal and block smoke stains and odors, apply 1 coat of KILZ® Original (stirring thoroughly before and occasionally during use) to the walls and allow to dry. Apply primer using a brush first to “cut in" around the edges, then use a roller to fill in.

What is Kilz 2?

Kilz 2 is a general-purpose primer that has many uses for the DIY Painter. If you are getting ready to repaint a room, Kilz 2 is great to primer any old marker spots, water stains, or new drywall patches. Priming new drywall patches is probably the most common way I use Kilz 2. By applying one coat of primer before starting your repaint, ...

How do I use Kilz 2?

Priming new drywall patches is probably the most common way I use Kilz 2. By applying one coat of primer before starting your repaint, you’ll ensure that these new drywall patches don’t flash through your final topcoat.

What is Kilz 2 All Purpose?

Kilz 2 All Purpose is my go-to general-purpose primer. If I need a primer for a very specific problem, there are other primers I use like Zinnser Peel Stop or Zinsser Smart Prime.

Does Kilz 2 seal wood?

Kilz 2 is also great at sealing in smells and grease such as in a room where people have smoked or done lots of cooking. It’s also good at priming trim, cabinets, doors, and windows before you plan on painting them. But while it does work, it’s not my first choice for priming wood (that would be Zinsser Smart Prime ).

Is Kilz 2 a good primer?

In Conclusion. Kilz 2 is a great general purpose primer and should solve most DIY Painter’s priming issues. It’s a great primer to keep on hand for small projects, getting rid of smells, priming small drywall repairs, as well as water and grease stains.

Do you need to primer before painting Kilz 2?

Kilz 2 Primer Review. To get the best paint job possible, you usually need to primer your surfaces before applying the topcoat. In fact, the right primer will usually make or break a difficult painting job.

Can you leave Kilz 2 unpainted?

Technically, yes you can leave Kilz 2 unpainted, but it won’t be very wear resistant and will not hold up well to everyday use. Kilz 2 is meant to be covered with a topcoat and to provide stain blocking and adhesion for that coat.

How long is Masterchem warranty?

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

How long does it take for Kilz 2 to dry?

New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2 ALL-PURPOSE Primer.

What to do if you spill a sandbag?

If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.

Is a warranty transferable?

This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory.

What is Kilz used for?

It can be applied to most surfaces, including wood, brick, drywall and painted metal. Kilz is available in a variety of formulations, including one containing zero VOCs--volatile organic compounds. Advertisement.

What is a substitute for TSP?

TSP substitute. Drop cloth. Painter's tape. Roller, paintbrush or sprayer. Kilz paint is a primer and stain-blocker that is used to cover up dark paint and stains. It also serves as a sealant and can protect wood from moisture.

How to prime with Kilz?

Step 1. Prepare the surface you are going to prime with Kilz. Remove peeling paint, dirt, wallpaper paste and any other substances that will create an undesirable texture or prevent the paint from adhering. Advertisement.

Does Kilz contain lead?

Some formulations of Kilz contain VOCs. Open windows to provide plenty of ventilation while you are using the product. Use caution when sanding old paint off of surfaces, as it may contain lead. If you suspect this may be the case, you must wear an approved respirator to protect yourself. Do not use Kilz on floors.

Can You Use Kilz 2 as a Final Coat?

No, Kilz 2 is not meant for use as the final coat. Even though this Kilz primer is different from others like Zinseer due to the dull flat-matte look, don’t use it as a final coat.

Do you Have to Paint Over Kilz Primer?

Yes, Kilz 2 helps bond and cover a porous surface, after which you can safely apply paint on top. The purpose of Kilz is purely for bonding and cannot resist elements the same way paint does. Therefore, leaving the primer without top coating can damage it over time.

How Long Do You Have To Wait Till You Paint Over Kilz?

If you don’t want to paint immediately after priming the surface, you can wait for a while. However, you should not let the surface uncovered for too long.

Why you Have to Paint Over Kilz?

To avoid dealing with damage or a dirty-looking surface, all you have to do is apply paint over the primer.

Can You Use Kilz as Ceiling Paint?

After applying Kilz primer on the ceiling, you may be wondering “Do you have to paint over Kilz on the ceiling?” Well, Kilz was formulated to be a primer, so basically just a base coat for what you paint over it. While you can leave it unpainted until it dries, it is not recommended to leave it on your ceiling without applying any coat of paint.

If You Paint with Oil Base Kilz, Do You Have to Use Oil Base Paint Over?

It is not mandatory to apply oil-based paint over oil-based Kilz Primer. While you would not be able to apply oil-based paint over latex primers, for instance, other types of paints such as latex ones would work over oil-based primers.

Best Way to Apply Kilz Oil-Based Primer

It is not difficult to apply Kilz Oil-Based Primer as long as you follow the right steps. There are a few ways to make sure that the application process goes perfectly. First, make sure to grab a good bristle brush either from the local hardware shop or from the Internet.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version3.47sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[22:58:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[22:58:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[22:58:43] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[22:58:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[22:58:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[22:58:43] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[22:58:43] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[22:58:43] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[22:58:43] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[22:58:43] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[22:58:43] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (15.68ms)
  • Application (3.45s)
  • 1 x Application (99.53%)
    3.45s
    1 x Booting (0.45%)
    15.68ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed3.43s
    • select * from `posts` where `published_at` <= '2025-06-13 22:58:43' and `slug` = 'how-to-use-kilz-2' and `posts`.`deleted_at` is null limit 1
      3.58ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-13 22:58:43
      • 1. how-to-use-kilz-2
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 91261 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.26msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 91261
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      1.32ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      670μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      490μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      3.41s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 14408 limit 1
      3.12msview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 14408
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        nRaaWjFWlEOWwUBYgEcsX5CLVOFa89ls5W2XjDPX
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-use-kilz-2" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-to-use-kilz-2
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.177" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "94f34e55e8b04354-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.177, 172.69.58.11" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-to-use-kilz-2" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-to-use-kilz-2" "REMOTE_PORT" => "36860" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.58.11" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.177" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "94f34e55e8b04354-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.177, 172.69.58.11" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749835723.2992 "REQUEST_TIME" => 1749835723 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Fri, 13 Jun 2025 17:28:43 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IktOS0kydURrVUd0S01tSmpkbkVJSHc9PSIsInZhbHVlIjoibEI2NEpNOW54elJ6TnFaTXRZQit3dVpSN0F4UEJQS3NHSDNRcHREOUtaYXdRZzVsdGJ1eGlDL1ROZTJmQlZjMzVINk4vY2pYZXZ5QS91a2h4clU0a29kZVdZaWF3aHp4bnRQLzBTTkJiemtJRitUK2hyQ3FuQ1Yva2VnaitORDMiLCJtYWMiOiI0YWI2ZWM2YmEwNDM2M2FkNGU5ODIzNTgyZGE5ODUxMmFmMjNkOGVlNjJkYjQ5M2IwOTU3M2VjYTY2ZDNhODJhIiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 19:28:46 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IktOS0kydURrVUd0S01tSmpkbkVJSHc9PSIsInZhbHVlIjoibEI2NEpNOW54elJ6TnFaTXRZQit3dVpSN0F4UEJQS3NHSDNRcHREOUtaYXdRZzVsdGJ1eGlDL1ROZTJmQlZjMzVINk4vY" 1 => "askhelpdesk_session=eyJpdiI6Ikh0azBGMVB6Q3hVTnNXNTJ6NHp4eEE9PSIsInZhbHVlIjoiQnRvcDJ4b21hTzFYdXE3VGV2dXl6Rm9jREFKNzhQS3hLTGU3NENuT251d3N0d2ljVDBlNjRIcU5OTURxeU5VQXIvbFNsZmZSSGEzZFZTbzFsTk5QbW53b0llNHdySzMzOVdoVFZIeS92LzRub0JWRTBIdmorRzNUMEdXdHlmSEMiLCJtYWMiOiJlMmZlYjk3ZjM1YjUwYjFmYTJiZGRkM2IzNDc2MzUxNTMzMDY3ODM0YThkYmFlZjhmNjJhYjVkYjg3ZWM1ZDcxIiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 19:28:46 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6Ikh0azBGMVB6Q3hVTnNXNTJ6NHp4eEE9PSIsInZhbHVlIjoiQnRvcDJ4b21hTzFYdXE3VGV2dXl6Rm9jREFKNzhQS3hLTGU3NENuT251d3N0d2ljVDBlNjRIcU5OTURxeU5V" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IktOS0kydURrVUd0S01tSmpkbkVJSHc9PSIsInZhbHVlIjoibEI2NEpNOW54elJ6TnFaTXRZQit3dVpSN0F4UEJQS3NHSDNRcHREOUtaYXdRZzVsdGJ1eGlDL1ROZTJmQlZjMzVINk4vY2pYZXZ5QS91a2h4clU0a29kZVdZaWF3aHp4bnRQLzBTTkJiemtJRitUK2hyQ3FuQ1Yva2VnaitORDMiLCJtYWMiOiI0YWI2ZWM2YmEwNDM2M2FkNGU5ODIzNTgyZGE5ODUxMmFmMjNkOGVlNjJkYjQ5M2IwOTU3M2VjYTY2ZDNhODJhIiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 19:28:46 GMT; path=/XSRF-TOKEN=eyJpdiI6IktOS0kydURrVUd0S01tSmpkbkVJSHc9PSIsInZhbHVlIjoibEI2NEpNOW54elJ6TnFaTXRZQit3dVpSN0F4UEJQS3NHSDNRcHREOUtaYXdRZzVsdGJ1eGlDL1ROZTJmQlZjMzVINk4vY" 1 => "askhelpdesk_session=eyJpdiI6Ikh0azBGMVB6Q3hVTnNXNTJ6NHp4eEE9PSIsInZhbHVlIjoiQnRvcDJ4b21hTzFYdXE3VGV2dXl6Rm9jREFKNzhQS3hLTGU3NENuT251d3N0d2ljVDBlNjRIcU5OTURxeU5VQXIvbFNsZmZSSGEzZFZTbzFsTk5QbW53b0llNHdySzMzOVdoVFZIeS92LzRub0JWRTBIdmorRzNUMEdXdHlmSEMiLCJtYWMiOiJlMmZlYjk3ZjM1YjUwYjFmYTJiZGRkM2IzNDc2MzUxNTMzMDY3ODM0YThkYmFlZjhmNjJhYjVkYjg3ZWM1ZDcxIiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 19:28:46 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6Ikh0azBGMVB6Q3hVTnNXNTJ6NHp4eEE9PSIsInZhbHVlIjoiQnRvcDJ4b21hTzFYdXE3VGV2dXl6Rm9jREFKNzhQS3hLTGU3NENuT251d3N0d2ljVDBlNjRIcU5OTURxeU5V" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "nRaaWjFWlEOWwUBYgEcsX5CLVOFa89ls5W2XjDPX" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-use-kilz-2" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]