Receiving Helpdesk

how to remove security tags from clothes with hands

by Prof. Reginald Grant I Published 3 years ago Updated 2 years ago

How to Remove Ink Tags

  1. Place the ink cartridge of the tag face-down. The ink cartridge is the part of the tag that juts out of the plastic.
  2. Pull the part of the clothing with the tag away from the rest of the clothing. Move it as far away as possible so the...
  3. Slip a rubber band around the pin of the security tag. The rubber band should be large and thick enough to be strong,...
  4. Hold the larger part of the ink tag with one hand.
  5. Pull the pin off with the other hand. The pressure of the pins should be strong...

Grip one side of the tag with the pliers. Grip the other side with another set of pliers. Gently bend each side. Don't bend too hard or the tag will crack and spill ink.Jun 1, 2017

Full Answer

How do you remove security tag ink from clothing?

Method 2 of 7: Using a Screwdriver

  1. Place the item of clothing on the floor with the ink cartridge facing up.
  2. Take a very thin flathead screwdriver and place it along the edge of the raised square pyramid.
  3. Press down hard. ...
  4. Continue to pop up the perimeter of the plastic.
  5. Remove the silver paper lining. ...
  6. Use the screwdriver to lift one of the metal arms that holds the pin in place.

More items...

How to remove ink theft Safety Tags from clothes?

There are two main types of tags:

  • Ink tags: First determine if the tag is an ink tag, which is usually white or red and circular and usually says it contains red, pink, or blue and yellow ...
  • Sensor tags: Usually clear or beige plastic capsules loaded with red and black ink. ...
  • Method 1. ...
  • Method 2: Use a lighter to melt the top part of the cone on the ink tag. ...

More items...

How to remove security tags from clothing with Magnet?

  • Mechanical security tag. These are usually secured with a pin or similar mechanical fastening. ...
  • Magnetic tag. These can be more difficult, as they have to be demagnetised to remove them. ...
  • Ink tag. This is usually a mechanical tag with with ink in a small glass tube that breaks if the label is opened with force.
  • Ask the store what kind of tag it is. ...

How to remove clothing security tag with the ink pack?

  • Cut it off with a dremel or thin wire cutter. ...
  • You can use a strong magnet to remove certain types of sensors. ...
  • Another eHow article offers a better solution for some tags— use rubber bands! ...
  • Do not attempt to freeze the garment and remove an ink tag. ...
  • Just hit it in the right place.

How do you remove anti theft tags from clothes?

0:081:10How to Easily Remove a Security Tag WITHOUT Forks or Fire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd touch it to the base of the security tag opposite to where this pin is. So what should happen isMoreAnd touch it to the base of the security tag opposite to where this pin is. So what should happen is you'll hear the inner mechanism. Click and then it'll release the pin.

How do I remove a security tag that wasn't removed?

0:204:43Remove Security Tags from Clothing - the Easy Way - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow we're gonna wrap it around multiple times we got a nice screwdriver no way to stick that in hereMoreNow we're gonna wrap it around multiple times we got a nice screwdriver no way to stick that in here hey Lewis let's work our way around alright.

How do you remove a security tag with a fork?

0:311:48Life Hack: Breaking off security tag with two forks - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou take two forks. You Jam one fork you take one for can you jam it. So that the side is facingMoreYou take two forks. You Jam one fork you take one for can you jam it. So that the side is facing down. You take the second fork and Janet's of the side is facing in the opposite direction.

What is the easiest way to remove a security tag?

To remove them at home, use a high-powered magnet, such as a hard drive magnet. Place the magnet on a flat surface and lay the tag on top of it with the ink dome or cartridge facing down. You should hear a click letting you know the tag has deactivated. Wiggle the pins in the tag up and down to release them.

Can I burn off a security tag?

1:023:25How To Remove Security Ink Tag On Clothes With A Lighter EASY!YouTubeStart of suggested clipEnd of suggested clipIf you can see there's a little spring that came out of it. Which I should pop off right now in aMoreIf you can see there's a little spring that came out of it. Which I should pop off right now in a second you don't want to burn the other side the other side is where that nasty ink is.

What are the different types of security tags?

Security tags can be broadly broken down into three main categories: electronic article surveillance (EAS) tags, visual deterrent tags and benefit denial.

Can you freeze security tags?

Ink tags are usually “freeze proof”, so you'll end up literally freezing the jeans but when you bash it, ink will spray EVERYWHERE. The ink does NOT come off. It'll stain your hands for days! Even “Orange Clean” or a “Magic Eraser” won't save you!

How to remove security tag from clothes?

Try the below easy way to remove security tags from clothes without paying off and instantly at home! 1. Using a Flat Head Screwdriver. To remove the security tag, put the flat-headed screwdriver along the edge of the pointy piece, and twist to open it up .

How to get a security pin off a security pin?

Start the process by grabbing the security tag, pointing the cone-like side up. Then, make a proper grip from the opposite sides of the security tag with the help of two separate sets of pliers. Now, gently bend the tag applying a little force. This will loosen the pin as well as the spring, making it pop off.

What is an electronic security tag?

An electronic security tag has a signal transmitter installed in it that is made to detect shoplifters. It can be used on any kind of product. The security tag is a significant part of Electronic Article Surveillance (EAS). The different types of security tags are as follows: Security Hard Tags. Alarming Tags. Ink Tags.

What are security tags?

A security tag is a small signal transmitter that firms attach to their products, particularly clothing. If someone tries to steal the item and passes through the exit without paying or removing the tag, the tag will sound like an alert.

Removing security tags using a rubber band

Step 1 – Make sure that the tag’s ink cartridge is facing down. The ink cartridge is the portion of the tag that protrudes out of the plastic tag. It is found on the opposite side of the pin.

Removing security tags using a screwdriver

A screwdriver with a flat end can be used to remove security tags off clothing in your home.

Removing security tags through freezing

Step 1 – Another way to get rid of the security tags from clothes is by placing the clothes in a freezer. After freezing, take the clothes off and let them rest for at least an hour before you start to remove the tag.

Removing security tags using needle nose pliers

Step 1 – Place the clothing on the surface with the ink cartridge facing upward.

Removing security tags by hitting the tag

Step 1 – Repeatedly yank the tag away from the clothing to dislodge the pin.

Removing security tags using two forks

It may appear impossible, but two forks are all that are required to remove the security tags.

How to loosen a security tag?

Gently insert an elastic rubber around the security tag’s pin. This rubber band has to be large, dense and quite strong. It must however be narrow enough to correctly fit round the pin so as to help the pin loosen with ease.

Why do you pull the security tag off of clothing?

The purpose of this separation is to prevent the ink from smearing the clothing should the sensor experience any crack.

How to break a security tag open?

Draw the security tag directly backward to enable the pin move out from the opening it initially went through. Immediately this is done, you can now break the security tag open.

How to remove a security pin?

The stores sometimes use magnets in removing security tags. This is done by putting two magnets beside the holding area of the pin and removing it. The other option is to position a powerful magnet towards the elevated plastic portion of the security tag pulling out the pin in the process.

What are the two types of security tags?

There are two major types of security tags which are the ink tag and the sensor tag. Let us briefly describe both of them:-

What is the mechanism of a security tag?

Security tags may differ in design, form or shapes and may come in different configurations. The locking mechanism for all of them are however basically the same. The mechanical devices for its operation are an ordinary metallic elastic device called the spring and a metal cartridge or container known as a clip.

What is a security remover?

The security remover device is just the ordinary electro magnet. You only need to position the magnet on a table and place the security tag’s bottom in a sitting down position.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9