- Pick the lock if you have a lock-picking set or a pen and a small Allen key. Hold the lock in your left hand.
- Remove the pocket clip from the pen.
- Make a bend in the bottom half of the hair clip (about 1 inch from the bottom) or use a small Allen key.
- Place lock in the open position.
- On the back of the lock, slide the reset lever into the “up” position.
- Insert the shackle into the lock and squeeze firmly twice to “clear” it.
- Pull up on the shackle to open the lock.
- Enter your new combination.
How do you open a combination padlock?
To open a combination padlock, start by turning the dial 3 times to the right to reset the numbers, since most padlocks won't work unless they're reset. On your third rotation, turn the dial to the first number in your code.
What happens if you lock a combination lock that is jammed?
Often a “jammed” combination lock isn’t really jammed. It’s just that the code has changed when you didn’t want the code to change. If you do get it your lock open follow the procedure to reset the combination number. Otherwise, you might be locked out when you close the lock again.
How do you unlock a lock that is jammed?
Or 433 or 233. These could be the new codes that were accidentally created when the lock jammed up. The trick to unjamming your lock is to move the dials while pulling on the shackle and find what the code has become. In a worst-case scenario, you could just test every single possible code from 000 right through to 999.
Can you break a padlock with a hammer?
Don’t strike the lock with a hammer with the key in the hole. This could damage the key, the locking mechanism or both, making the lock impossible to open. A rusted padlock is often a catalyst for frustration. Many locks, especially older ones, don't handle exposure to the elements or moisture well over time.
How do you open a jammed padlock?
0:493:14How to free a stuck lock or padlock. Rusted lock? No ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can put antifreeze in there and when it's frozen up you can also put lubricant in there orMoreSo you can put antifreeze in there and when it's frozen up you can also put lubricant in there or graphite. And a lot of people will swear by graphite.
How do you force a combination lock open?
0:285:33How to Crack the Code & Open a Combination Padlock - YouTubeYouTubeStart of suggested clipEnd of suggested clipKeep some tension on the shackle and rotate to the dial until we feel a change this time numberMoreKeep some tension on the shackle and rotate to the dial until we feel a change this time number eight feels a lot looser.
How do you break open a combination lock?
0:426:19Break open any Master Combo Lock in 8 tries or less! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to take this check old and we're gonna lift it up I use my index finger to lift it up asMoreWe're going to take this check old and we're gonna lift it up I use my index finger to lift it up as hard as I can and then I start turning the dalek counter clockwise towards the number five.
How do you unlock a 3 digit combination lock?
1:312:53How to Open a 3-Dial Combination Lock Case in 6 Minutes or LessYouTubeStart of suggested clipEnd of suggested clipIt will automatically open if you're keeping that pressure on so you're starting at zero zero holdMoreIt will automatically open if you're keeping that pressure on so you're starting at zero zero hold the pressure on and go one two three four five six seven eight nine zero.
Can you break a combination lock with a hammer?
Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.
Why would a combination lock stop working?
An outdoor lock might experience rust, frost, or a physical blockage in the shackle that jams the lock closed even when you've entered the correct combination, resulting in a combination padlock that won't open. Freezing temperatures can cause the lock shackle and locking mechanism to constrict, seizing up the lock.
How do you reset a 4 digit combination lock if you forgot the code?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
How do you open a Master combination lock without the code?
0:045:59How to Crack Your Master Lock Combo in 3 Easy Steps - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you what you want to do is you want to put your pointer finger up here. And you want to applyMoreSo you what you want to do is you want to put your pointer finger up here. And you want to apply some pressure. So you want to pull this up and rotate this master lock.
How do you break a Master Lock combination lock?
0:071:54How To Crack a Master Lock- Combination Lock- EASY - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom here pick up the lock pull most the slack out of the shackle. Pull the shackle with mediumMoreFrom here pick up the lock pull most the slack out of the shackle. Pull the shackle with medium pressure as you rotate clockwise as you turn you're going to feel a sticking point for mine at 17 I want
How to open a combination padlock?
To open a combination padlock, start by turning the dial 3 times to the right to reset the numbers, since most padlocks won't work unless they're reset. On your third rotation, turn the dial to the first number in your code. Next, turn the dial to the left until you land on the second number.
How to find the correct combination for a lock?
Find the correct combination for your multiple-dial combination lock on the lock's packaging, or on a sticker behind the lock. Remember to remove the combination sticker from the lock before you use it.
What does the first number on a lock mean?
The first number in the code represents the number that your leftmost dial must be on to open the lock. Rotate the dials until the indicator on the side of the lock lines up with the first digit of the code. Sometimes the indicator for the numbers will be a red line or arrow.
How to line the indicator on a lock?
Line the indicator with the second digit in your combination after you pass the first number. Stop rotating the dial once you land on the second digit. Remember to pass the first number in the combination when turning the dial or your lock will not open.
How to reset a padlock if you don't reset it?
Look for a three digit code when you buy your lock. Turn the dial at least three times to the right. Turning the dial three full rotations clockwise will reset the numbers and allow you to input the first number in your combination. In most padlocks, if you don't reset it, your code won't work.
How to find a lost padlock?
Sometimes lock companies will be able to tell you your padlock combination if your lock has a serial number, which can usually be found as an engraving on the back of the lock. Call the manufacturer of your padlock, or submit a lost combination form by mail, fax, or email.
How to find the keyhole in a lock?
1. Look under the padlock for the keyhole. Tilt the bottom of the padlock towards you so that you can see the keyhole. If it's dark where you are, you may need to use a flashlight or cell phone to illuminate the hole for you.
What to use when a padlock won't open?
Solution: Isopropyl alcohol is the best solution when a padlock won’t open because of ice. You can use rubbing alcohol or hand sanitizer so you are not adding water for future freezing and rust. Heating the lock can also work, but getting a heat source to the lock may prove difficult.
Why won't my padlock open?
When a padlock won’t open due to a broken actuator, it means the keyway is as good as useless for getting the lock open. To remove a broken padlock that has issues with its actuator you will most likely have to cut the lock open.
Why is my padlock keyway blocked?
Besides the key, people will sometimes stick foreign objects into the keyhole. This may not be visually apparent if objects have been forced into the recesses of the keyway, but you will notice that the key will not fully insert.
How to tell if a padlock actuator is broken?
Broken Actuator. A reliable sign of a broken actuator is when a key keeps turning in the lock. Alternatively, when a padlock won’t open because of a broken actuator the key may turn correctly, with no resistance, but stop at the appropriate rotational point. The symptom indicative of the broken padlock will depend on what precisely is broken.
How many keys does a padlock have?
Keyed padlocks will come with at least two keys. See if you can find your spare key, test it in the padlock. If the issue persists with a second key, then there is likely something wrong with the lock and not the key. When the reason a padlock won’t open is your key, you likely will not be able to fix the broken key.
Where is the actuator on a pin tumbler?
Actuator – Located on the back of the plug, this component will retract the locking pawl when the plug is turned. Pin chambers – In standard pin tumbler locks, the driver pins must be moved out of the plug into their respective pin chambers so the plug can rotate.
What to do if your key is not inserting?
If the key is not inserting correctly, check the section on blocked keyways. A damaged key may be responsible for the issue, or the padlock is broken in one of the other ways discussed elsewhere in the article. You can take a look at your key and check for signs of wear.