Receiving Helpdesk

how to measure refrigerator opening

by Ludwig Schmitt Published 4 years ago Updated 3 years ago

Part of a video titled How to Measure a Fridge for your Kitchen - YouTube
0:25
3:28
Go from the floor to the lowest point on the upper cabinets. Finally you'll measure the depth of theMoreGo from the floor to the lowest point on the upper cabinets. Finally you'll measure the depth of the space. Go from the back wall to the front edge of your counters or adjacent wall.

What is the standard opening for a refrigerator?

36” wideThe standard opening for a refrigerator is usually 36” wide and the wall cabinet over it is usually 36” in width.

What size opening do I need for a 36 inch refrigerator?

The actual width of a 36-inch refrigerator is 35 and 3/4”. You need an opening of at least 37” wide or wider to have enough room to fit this size refrigerator.

How is fridge space measured?

You want to measure the space at its narrowest points to ensure a good fit. Measure the height of the space from the floor to the lowest point on the upper cabinet. Make this measurement twice, first at the front of the space and then at the back of the space.

How much room do you need to open a fridge door?

You'll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.

What is the actual width of a 36 fridge?

Here are the dimensions of this counter-depth refrigerator: Refrigerator Size: 36 inch. Product Width: 35.8in.09-Jun-2019

How far should a fridge stick out from counter?

Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.10-Dec-2020

How much gap do you need around a fridge?

Remember to leave 25 mm of free space around the top, back and sides to allow for the heat produced during refrigeration to escape. Be sure to also measure clearance (entryways, doorways etc.) to ensure that when your fridge is delivered it will fit safely into the home, and your old fridge can be safely removed.

How much space should be between fridge and wall?

Space Between Refrigerator and Side Wall You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.

How much wall clearance does a fridge need?

The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.11-Jan-2021

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9