Receiving Helpdesk

how to make sofa covers at home

by Dr. Alec Hamill II Published 4 years ago Updated 3 years ago

DIY Sofa Cover To Make At Home

  • Step 1. Take the sofa dimensions Measure the sofa for slipcover and get the length from the floor to the top of the arm,...
  • Step 2. Sew the sofa cover Cut a piece for fabric according to the length of the cover flat by the depth of the...
  • Step 3. Install the sofa cover

Part of a video titled 10 DIY Sofa Cover Ideas - YouTube
3:07
9:04
First start pinning piping to fabric from the back of the cushion and pin it around the cushion trimMoreFirst start pinning piping to fabric from the back of the cushion and pin it around the cushion trim the piping and sew the fabric. Once. You're done with the piping.

Full Answer

How to make a sofa slipcover without sewing?

How can I make my couch covers look good?

  • Place the seams on both sides of the slipcover on the same parts of the sofa.
  • Look for sofa covers with ties at the bottom to eliminate excess fabric.
  • Look for slipcovers with elastic bands sewn directly to the slipcover fabric.

How to cover a sofa with fabric?

The Best Fabric for Re-Covering a Sofa

  • Cotton Twill. For an instant update that is cost efficient, cotton twill is an ideal option. ...
  • Microfiber. An option often found on sofas available in home furnishing stores, microfiber or microsuede is a relatively budget-friendly choice that works well with almost any style of room decor.
  • Velvet. ...
  • Leather. ...
  • Latex Backed. ...

How to put a slipcover on a sofa?

Two-Piece Slipcover:

  • Remove all the pillows and seat cushions from your sofa.
  • Follow steps two through six for the one-piece slipcover.
  • Place the seat cushion (s) inside the seat-cushion cover and zip the cover closed. Place the seat cushions on your sofa, arrange your throw pillows and enjoy.

How much does it cost to make a sofa?

This is a really interesting question, by the way. There is no real “set limit” as to how much does it cost to make a sofa - it could go for a few tens from a score of thousands, depending on the materials you use. Actually, I can tell you that doing upholstery is the cheapest kind of production, industrially speaking, of all the furniture sector.

See more

How do I make my own couch covers?

5:198:15DIY COUCH COVER (no sew, super easy slipcover) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd stapled with a staple gun that fabric to my couch. I decided i'm not going to be pulling thatMoreAnd stapled with a staple gun that fabric to my couch. I decided i'm not going to be pulling that off and washing it i it's pretty much covered for the most part with the pillows.

What is the best fabric for sofa cover?

The Best Fabric for Re-Covering a SofaCotton Twill. For an instant update that is cost efficient, cotton twill is an ideal option. ... Velvet. A high-density wool or poly-blend velvet is a sophisticated option that can withstand a lot of wear over the years. ... Leather. ... Latex Backed.

How do you make a couch cover look good?

Tips From People Who Have Tested Slipcovers Hundreds of TimesPut on the slipcover the right way. The seams on both sides should be placed on the same parts of the sofa. ... Look for sofa covers with ties. Ties at the bottom remove excess fabric. ... Look for slipcovers with elastic bands sewn directly to the slipcover fabric.

What material is used for sofa covers?

1. Cotton Sofa Fabric: Cotton fabric for sofas is well suited due to its texture, strength, and resistance to soiling and wrinkling.

How do you cover a sofa with fabric?

4:256:56Slipcover Hack | How To Inexpensively Cover a SofaYouTubeStart of suggested clipEnd of suggested clipStart by laying the fabric over the cushions and draping it down towards the floor. Work. With itMoreStart by laying the fabric over the cushions and draping it down towards the floor. Work. With it until the fabric just skims the floor. And then smooth the fabric over the cushions.

How can I make my old sofa look new?

1:0311:2810 Old Couch Makeovers and DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a staple gun to tuck the fabric as close to the bottom and around the arms. Use the remainingMoreUse a staple gun to tuck the fabric as close to the bottom and around the arms. Use the remaining fabric to cover the cushions. And instead of sewing the zipper. You can use velcro to close the seam.

How do you make slipcovers?

3:558:14HOW TO MAKE A DIY SLIPCOVER + Summer Living Room DecorYouTubeStart of suggested clipEnd of suggested clipUsing a standard sewing machine and a 1/2 inch seam allowance start sewing your slipcover. TogetherMoreUsing a standard sewing machine and a 1/2 inch seam allowance start sewing your slipcover. Together piece by piece it surely depends on your chair.

How do you make a no sew couch cover?

1:0211:53No Sew Drop Cloth Slip Covers - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst measure your couch to see how many panels you'll need. The first step is to cover the frontMoreFirst measure your couch to see how many panels you'll need. The first step is to cover the front apron of the couch. I cut off a strip that left me about six to eight inches on the top.

How do you make a slipcover without sewing?

3:5210:07DIY NO SEW SLIPCOVER | SLIPCOVER TUTORIAL - YouTubeYouTubeStart of suggested clipEnd of suggested clipNo I continue with the next section of fabric pinning. And cutting to size I penned the two piecesMoreNo I continue with the next section of fabric pinning. And cutting to size I penned the two pieces of fabric together as if it were the seam. Itself. I remove it and take it to the ironing board and

How much fabric do I need for a 3 seater sofa?

Yardage EstimatesUpholstered Furniture2 Cushion Sofa: 16 yards3 Cushion Sofa: 18 yards6 Cushion Sofa: 22 yardsOttoman: 3.5 yardsSlipper Chair: 14 yardsWing Chair: 10 yardsUpholstered Headboards32 more rows

How much material do I need to cover a couch?

Allow approximately 12 yards of fabric as a base estimate for a 6-foot-long, 2-cushion sofa. Increase that to 14 yards for a 7-foot sofa. Estimate an additional 1.5 yards of fabric per cushion for a sofa with more than two cushions -- so a 7-foot-long, 6-cushion sofa would require around 20 yards of fabric.

Which type of foam is best for sofa?

Polyurethane foam is the most common type of foam fill for sofas, and is also often used as “toppers” for mattresses. It is usually yellow in color and high-resiliency (meaning it bounces back quickly).

Community Q&A

I am making a slipcover for a sofa. Do I use the fabric going length-wise, or do I piece it together width-wise to get necessary width?

Tips

Railroad the fabric in order to avoid problematic seam placement. "Railroading" means you'll place the fabric with the grain running horizontally along the length of the sofa, with the selvage seams running along the floor.

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 286,558 times.

Turn Your Bathroom into a Relaxing Spa

Looking at the same sofa for years can be tedious, especially if the upholstery begins to be torn into pieces. Consequently, you might be thinking about buying a new sofa, which sadly can burn a hole in your pocket.

10 Wall shelf styling living room

Now or later, it becomes a display that turns the wall into a form of art and...

How to craft some New and Ingenious Sofa Cover ideas

No matter how beautiful and comfortable our couches can be when we bought them, they will always go through natural wear and tear; this is unavoidable. Over time, your sofa is not going to look as good as when you bought it. This fact is because we sit and lie on them pretty much every day. Also, over time, we encounter accidents on them.

10 DIY Sofa Cover List Video

Next I am going to present you a super relevant video that is completed with a professional voice over production and editing process. I bring this video to enrich your learning experience and to appeal your love. I hope it works. BTW, Feel free to enjoy or share it with anyone close to you in social media.

10 Small Living Room and Transformations

Share Share on Pinterest Share on Twitter Something happens to your sofa somehow. And one of the most irritating things is when you spill coffee on the sofa or when your kids use it as a canvas and begin to doodle. No matter how hard you try to wash it, the stain remains there.

How to make your own sofa cover

Is your living room furniture starting to look its age? From faded or stained fabric to patterns that just aren’t fashionable any longer, upholstered furniture can wear out over time and require replacement.

START BY MEASURING THE FURNITURE

Before you start picking out fabrics for your living room, you’ll need to measure the furniture. Measure each “face” of the furniture and record the dimensions so you’ve got an exact assessment of how much fabric is required for each item.

BUY THE FABRIC AND START CUTTING

Once you’ve got your measurements, it’s time to start preparing the fabric. Choose fabric that matches your furniture and feels soft and comfortable. If you choose a cotton-based fabric, wash it before cutting it to make sure it shrinks to size.

PINNING THE SLIPCOVER TO THE FURNITURE

The final step in the process is pinning the slipcover to the furniture. If your sofa or armchair sits close to the ground, you can cover the gap between the furniture and the ground by creating a skirt that attaches to the bottom of the slipcover.

DOES YOUR LIVING ROOM FURNITURE NEED AN UPDATE?

From stains and faded material to fabric that’s just worn out, living room furniture can go from beautiful to seriously aged over just a few years. A slipcover is a simple, inexpensive solution that can make any armchair or sofa look fantastic.

Step 1: Materials

Fabric of you choice - For beginners it's always better to go with plain or printed fabric which has no direction. Fabric with lines or patterns will be a lot of waste as you have to align the lines to give a nice neat finish.

Step 2: Measuring

First serf the net to see some pictures of slip cover designs. See and save the pattern you like. Next is to see if it's possible for your sofa. If it's not, try and incorporate what you like in the pattern in your sofa pattern. After all, it's your sofa! As you can see from my introduction picture, I wanted a sofa with a skirt and piping.

Step 3: Cut Panels

First cut all the panels. If you fabric has a right and wrong side remember that, the BRSP will have to have panels cut with fabric folded either right side facing together or wrong side facing together. Leave sewing allowance all around. My fabric was hand-loom (didn't have a wrong side) and a bit stretchy.

Step 4: Making the Piping

Piping gives sofas and cushions a nice professional clean and neat look. It's easy to do if you have the zipper foot.

Step 5: Cut and Sew - Seat

For seat you would basically get either a square or rectangle fabric. First hem right round or over-lock for neatness. you can forgo this if you like as it wouldn't show. If you have hemmed the seat fabric then tuck it into the seat firmly with the wrong side facing up. Pin the corners and draw a line for convenience.

Step 6: Back Rest

Cut the back rest as per measurement. Here you would get a long rectangle piece. Now sew the right side of the seat back to the right side of the back rest fabric.

Step 7: Joining the Arm Rest

Now the Arm Rest. Please observe pictures properly to understand this bit.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9