The process to make bacteriostatic water for injections are as follows:
- First, take an alcohol pad to clean the vial of benzyl alcohol.
- Next, take a proper amount of benzyl alcohol and set it aside.
- Later, measure the tap or sterile water in the vial for bacteriostatic water. However, it would be best if you made sure that the water didn’t have lead. ...
- Finally, mix the benzyl alcohol with the water.
Full Answer
Can I buy bacteriostatic water at a pharmacy?
You can typically find it in a vial form at any pharmacy behind the counter, and you can buy it without a prescription. Each vial contains multiple applications. Bacteriostatic water has a shelf life of roughly 28 days before it loses its ability to prevent bacterial growth once opened. Click to see full answer.
Where can I buy bacteriostatic water locally?
Researchers at Virginia Tech report that triclosan can reacts with chlorine in tap water to form significant quantities ... campaign urging consumers to pledge not to buy triclosan products, pass local policies and educate their communities on the dangers ...
Where to buy BAC water?
One reader told us they bought bac water for sale from a company that looked legitimate but it turned out to be plain, ordinary water that she bought. Medlabgear is a popular company where you can buy bacteriostatic water cheap as well as syringes, vials, needles and more.
Does bacteriostatic water go bad?
Bacteriostatic water does have a shelf life, and it should be discarded after 28 days since the benzyl alcohol can lose its potency after this time. Can you use sterile water for injection? Sterile Water for Injection, USP, is sterile, nonpyrogenic, distilled water in a single dose container for intravenous administration after addition of a ...
Can I use sterile water instead of bacteriostatic water?
Do not use Bacteriostatic Water for Injection, USP for those products that specify the use of only Sterile Water for Injection, USP as a sterile solvent.
Can I buy bacteriostatic water at a pharmacy?
If you are needing bacteriostatic water for a medication today, you can shop around at various local pharmaceutical retailers, such as Walgreens, CVS, or Walmart. Their pharmacies should have bacteriostatic water in stock and have trusted suppliers for this product.
Can you use bacteriostatic water for injection?
The Bacteriostatic Water can be used in diluting drugs that can subsequently be administered by intravenous, intramuscular, or subcutaneous injection.
How do you make sterile water for injections?
Put the container in a pan of boiling water for 10 minutes. or Clean the container in a dishwasher on the full cycle (not a short wash). Put the mixture in a sterile container, write the date on a label, and put the sterile saline in the refrigerator.
How can I buy bacteriostatic water?
Simply visit or call your local pharmacy and mention if they can special order bacteriostatic water for you. Most drug distributors should have bacteriostatic water from reputable sources. It would be even more beneficial if you provide a particular identifying code such as a UPC, SKU, or NDC number.
Why is there a shortage of bacteriostatic water?
Reason for the Shortage Pfizer has bacteriostatic water for injection on shortage due to increased demand.
Is 0.9% sodium chloride the same as bacteriostatic water?
Bacteriostatic 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride in water for injection. Each milliliter (mL) contains sodium chloride 9 mg and 0.9% (9 mg/mL) benzyl alcohol added as a bacteriostatic preservative. May contain hydrochloric acid for pH adjustment.
Can you use distilled water for injection?
Sterile Water for Injection, USP, is sterile, nonpyrogenic, distilled water in a single dose container for intravenous administration after addition of a suitable solute. It may also be used as a dispensing container for diluent use.
Does bacteriostatic water have to be refrigerated?
There are no special rules that need to be followed as far as discard. Keep your unused bacteriostatic water in the container it arrives in. Store the container in a dark place with a residual, resting room temperature that doesn't exceed 80 degrees Fahrenheit and doesn't drop below 60 degrees Fahrenheit.
Can I make sterile water at home?
Place cooker with water on a heat stove. Boil water for a minimum of 20 minutes. The temperature within the cooker should be maintained at 121 degrees Celsius or 250 degrees Fahrenheit throughout the boiling period. After that, your sterile water is ready!
What can I use instead of sterile water?
In summary, distilled water is sterile, but sterile water isn't always distilled. Distillation takes it another step toward perfection. Distilled water is still your best choice.
Is boiling water sterile?
Boiling water kills or inactivates viruses, bacteria, protozoa and other pathogens by using heat to damage structural components and disrupt essential life processes (e.g. denature proteins). Boiling is not sterilization and is more accurately characterized as pasteurization.
DESCRIPTION
The following preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection.
CLINICAL PHARMACOLOGY
Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production).
INDICATIONS AND USAGE
This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.
CONTRAINDICATIONS
Due to the potential toxicity of benzyl alcohol in neonates, solutions containing benzyl alcohol must not be used in this patient population.
WARNINGS
Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used.
PRECAUTIONS
Do not use Bacteriostatic Water for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture.
ADVERSE REACTIONS
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
3 Precautions to Remember
While benzyl alcohol and its use in bacteriostatic water are presumed to be safe, there are some precautionary rules that we need to consider to responsibly use the solution. Manufacturers and supplying companies like us here at Med Lab Gear will often dictate very specific instructions and warnings regarding bacteriostatic water and its use.
How to Administer Bacteriostatic Water
Properly utilizing the bacteriostatic water is key, otherwise you’re just wasting your money. How you utilize the bacteriostatic water is going to be dictated by what you are using the solution for.
Storage Rules for Bacteriostatic Water
Whether your bacteriostatic water vials come with rubber stoppers or flip top lids, the storage rules should largely remain the same. If your vial has been opened, you should make sure to use the water within a month.
Transportation Guidelines for Bacteriostatic Water
When transporting your bacteriostatic water from location to location in your lab, remember to keep two hands on the container. If you’re transporting just a single vial, grasp the vial tightly in your hand so you don’t risk drop.
Side Effects of Bacteriostatic Water Usage
Apart from the very rare allergic reaction, there are a few potential side effects that you need to consider. Local tenderness at an injection site can be caused by the benzyl alcohol in the bacteriostatic water. We already know how serious exposure can be to a fetus but there is little concern for an adult human.
Med Lab Gear Bacteriostatic Water
Our bacteriostatic water is packaged in semi-rigid vials that are created specifically for laboratory solutions like bacteriostatic water. The container doesn’t need a vapor barrier to keep the labeled volume.
Bacteriostatic Water vs. Sterile Water
Do not confuse the two, as bacteriostatic water is not the same as sterile water. Sterile water comes with no microbes at all so it can be more pricey than bacteriostatic water. Sterile water is manufactured and distributed for single-use only. The sterile water is only sterile until it has been opened.
Requires Specialist Preparation
I quickly grabbed this one as soon as I saw all the protocols involved in getting into the lab where the clinical liquids were prepared. There is a dress code, which is the usual overalls worn by those working in a highly clean environment, and this is precisely how the labs can be referred to—a highly sterile environment.
Not Entirely an Alcohol
The benzyl-alcohol you find on BT fluid labels isn’t a pure alcohol solution like ethanol. It is instead a concoction of fruits and plants. You can also find it in some essential oils. The preparation aims to separate the aromatic alcohol by a hydrolysis or hydrogenation process based on the lab procedures.
Can be Used to Dilute Medication
With the proper dilution, the BT fluid can be used several times during treatment. Without the ability of the contaminating bacteria to replicate, the water can stay safe until it has been used. But there is a ratio to which to combine the sterile and filtered water into the benzyl-alcohol.
It is Cheaper to Buy in Bulk
Having to rush down to the drug store only to get a bottle of injection water would likely cost more than when you get the pack. Of course, this may mean you are already planning for serious health challenges. But if you are in the service of rendering health services, you should get your BT fluids in bulk.
Using Bacteriostatic Water Safely
When is it not safe to use BT fluid? When you are not in any need of medical attention or medication. But it is advised that pregnant women and breastfeeding mothers shouldn’t be injected with bacteriostatic water. If at all, it should be administered as a last resort when there is no other feasible solution in sight.
What Is Bacteriostatic Water?
Like sterile water, bacteriostatic water contains no microbial agents. What makes it different?
Uses for Bacteriostatic Water
When administering medications, you may wonder about the options for using bacteriostatic water. Always follow the instructions the manufacturer provides with your medication.
Low Cost
When looking for a longterm solution to a health condition, cost will most definitely come into consideration. While you may not get much choice in the cost of the medication, you can pick cheaper solvents.
Reusable
Most solvents require you to discard them after a single use. This is because once anything touches the liquid, it loses sterility and microbes can grow. These microbes carry the potential to infect your body and make you sick.
Long Shelf Life
Many solvents do not last long once opened. For instance, saline solution gets discarded after only a day of breaking the seal. Bacteriostatic water, however, lasts much longer (up to 28 days), making it more likely to use everything you buy.
Bacteriostatic Water Mixes Well
Whenever you mix in a solvent with your medication, you need to consider possible chemical interactions. Sometimes, perfectly safe solvents interact with other chemicals to create a dangerous solution in your body.
Get Your Bacteriostatic Water for Injection
Whether you need HCG or another type of medication via IV, IM, or SC route, you want something safe, efficient, and cost effective. This is why you should choose bacteriostatic water for injection.
What is needed to mix HGH?
After you get the prescription for HGH from a doctor, you’ll need additional appliances to make injections. Typically, you need water, syringes, and HGH itself. The biggest concerns usually arise about water types for injections. Let’s see what water is best for an HGH injection.
Mixing HGH: a Step-by-Step Guide
With sterile water, syringes, and HGH medication at hand, you can prepare HGH for injections. The procedure is simple, and once you do it on your own, you’ll be able to repeat it with ease. Follow our instructions to learn how to mix HGH.
Possible Side Effects
As we mentioned before, the optimal HGH dosage varies from 2 to 4 IUs per day, depending on your goals. It’s not recommended to increase the dose by more than 6 IUs per day. If you administer too much HGH, it may cause unwanted adverse effects.
When to complete the HGH cycle?
When you’ve adjusted HGH dosage and have no unpleasant health issues you can start your HGH cycle. Some athletes consider intermittent cycles to be an effective strategy. Unfortunately, making pauses during the cycle isn’t so beneficial and may be an option for people with particular medical conditions.
How can I obtain HGH?
Preparing injectable HGH is easy when you know your dosage. All you should do is pour enough water into the HGH vial and slowly mix it until it becomes transparent fluid. You can use sterile or bacteriostatic water to dissolve HGH. Just follow the instructions mentioned above and you’ll easily prepare HGH.
Description
Clinical Pharmacology
- Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production). Water balance is maintained by various regulatory mechanisms. Water distribution depends primarily on the conc…
Indications and Usage
- This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.
Contraindications
- Due to the potential toxicity of benzyl alcohol in neonates, solutions containing benzyl alcohol must not be used in this patient population. Parenteral preparations with benzyl alcohol should not be used for fluid replacement. Parenteral preparations containing benzyl alcohol should not be used in epidural or spinal anesthesia procedures. Bacteriostatic Water for Injection, USP must b…
Warnings
- Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used. Intravenous administration of Bacter…
Precautions
- Do not use Bacteriostatic Water for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture. Consult the manufacturer's instructions for choice of vehicle, appropriate dilution or volume for dissolving the drugs to be injected, including the route and rate of injection. Inspect reconstituted (diluted or di…
Adverse Reactions
- Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation. If an adverse reaction does occur, discontinue the infusion, e…
Overdosage
- Use only as a diluent or solvent. This parenteral preparation is unlikely to pose a threat of fluid overload except possibly in very small infants. In the event these should occur, re-evaluate the patient and institute appropriate corrective measures. See WARNINGS, PRECAUTIONS and ADVERSE REACTIONS.
Dosage and Administration
- The volume of the preparation to be used for diluting or dissolving any drug for injection is dependent on the vehicle concentration, dose and route of administration as recommended by the manufacturer. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. See PRECAUTIONS.
How Is Bacteriostatic Water For Injection Supplied
- Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Distributed by Hospira, Inc., Lake Forest, IL 60045 USA LAB-0977-2.0 Revised: 08/2019