Receiving Helpdesk

how to install a gfci outlet with 4 wires

by Braeden Kertzmann III Published 3 years ago Updated 2 years ago

Steps to install a GFCI with 4 wires:

  • Firstly, before doing anything else, turn off the power from the circuit breaker. This will cut off the power supply to...
  • After turning off the power supply, go to your electrical outlet box and remove the cover plate with the help of a...
  • In our electrical outlet box, there are some receptacles that need to be configured to be...

The gfci is going to have one side that's marked line and one side that's marked load the load sideMoreThe gfci is going to have one side that's marked line and one side that's marked load the load side will generally have a piece of tape over it if you have two hot wires.

Full Answer

Videos of How to Install a GFCI Outlet With 4 Wiresbing.com/videos

Precautions:

  • Switch off the main circuit breaker to make sure the power supply is OFF before wiring a GFCI outlet.
  • Use the suitable voltage and ampere rating of switch with appropriate wire size and proper size MCB according to the load rating.
  • Use the correct polarity i.e. ...

More items...

Images of How to Install A GFCI Outlet With 4 Wiresbing.com/images

How many outlets can you run off a GFCI? Re: number of outlets after gfci Using 220.14, a maximum of 13 receptacle outlets are allowed on a 20A circuit. They can be single or dulpex and still only counts as one receptacle.

How do you install a GFCI outlet?

Turn Off the Power

  • Turn off power at the circuit breaker or fuse.
  • Place a note at the electrical panel to warn others not to turn it on while you are working on this project.
  • Use a voltage tester to verify power is shut off.

How many outlets can you run off a GFCI?

Using a GFCI without ground wire is OK as long as you label it as such. This one needs a sticker. GFCI outlets come with a supply of them. Safety first: Turn off the power at the breaker box.

How to rewire a problem GFCI outlet circuit?

Can you hook up a GFCI without a ground wire?

What wires do you put on the line side of a GFCI outlet?

2:038:50Your hot wire to the hot side and the neutral wire to the neutral. Side.MoreYour hot wire to the hot side and the neutral wire to the neutral. Side.

Where does the red wire go on a GFCI outlet?

2:353:39I'm going to connect the hot wire to the brass screw the side with the narrow slot wrap your hookMoreI'm going to connect the hot wire to the brass screw the side with the narrow slot wrap your hook clockwise. If you wrap it counterclockwise. It could push off on some outlets or gfcis.

How do I wire a GFCI outlet with multiple wires?

6:099:30By line here within the gfci. You can see that. So the power coming in or the line would go withinMoreBy line here within the gfci. You can see that. So the power coming in or the line would go within this side of the receptacle. And then you take off the sticker. And here is your load.

How many wires do you need for GFCI?

Installing a GFCI receptacle can be more complicated than installing a conventional receptacle. A cable consists of 2 or 3 wires. LINE cable: Delivers power from the service panel (breaker panel or fuse box) to the GFCI.

Do red and black wires go together?

These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

Can red and white wires go together?

In the US, the answer would be no, even though I am reluctant to answer this. White is not aggressive. White is neutral, black is 120, green is ground, and red is the other phase of the mains into your house.

How do you connect 4 wires together?

0:094:33You may use Scotch lock reducing. But terminals a 3-way connector. You may even get creative.MoreYou may use Scotch lock reducing. But terminals a 3-way connector. You may even get creative.

Why does my outlet have 2 black and 2 white wires?

So, why are there two black and two white wires in your outlet box? There are two black and two white wires in an outlet box because the outlet is in the middle of a series circuit, accepting power from another source and sending it on. Two cables are hot wires, bringing the power in and carrying it onward to the next.

Do GFCI outlets need their own neutral?

Each GFCI does require a dedicated hot and neutral, but you can daisy-chain the ground. The way you would normally install two GFCI protected outlets is to put the GFCI closest to the panel, then daisy-chain a regular outlet off of it. If you put another GFCI downstream of a GFCI, it will not work correctly.

Will a GFCI work without a ground?

In short, yes. If your circuit doesn't have a ground wire, you can still install a GFCI outlet for protection. GFCI outlets without a ground wire are legal and work; however, choosing to install GFCI outlets without a ground wire does come with some disadvantages.

What happens if you wire a GFCI backwards?

If you miswired the GFCI it may not prevent personal injury or death due to a ground fault (electrical shock). If you mistakenly connect the LINE wires to the LOAD terminals, the GFCI will not reset and will not provide power to either the GFCI receptacle face or any receptacles fed from the GFCI.

How do you pigtail a GFCI outlet?

0:552:00As far as for the hot one comes off going to the GFI. And one goes to our light switch that givesMoreAs far as for the hot one comes off going to the GFI. And one goes to our light switch that gives power to each on its own for the neutral one goes to the GFI.

How to install a GFCI with 4 wires?

Steps to install a GFCI with 4 wires: Firstly, before doing anything else, turn off the power from the circuit breaker. This will cut off the power supply to your whole home but if you are installing the GFCI only in one room then do turn off the breaker of only that room. It prevents shock during the installation process.

How many wires are in a GFCI outlet?

GFCI outlet with four wires comes with two black and two white wires in addition to the main ground wire. Before making the connections of the GFCI outlet with 4 wires, we need to determine first which pair of black and white wires among the two will be used for line and load. We have to determine separate pairs of black ...

What is GFCI in 2021?

March 13, 2021 by Cristina Criado. GFCI outlets, installed in our homes, protect us from getting a shock due to water collected inside or outside our homes. Taking the example of any working area like a parking place for instance where there is a possibility of the electric wiring affected by the rainwater, can cause ground faults.

What is the yellow sticker on a breaker box?

Receptacles usually have a yellow sticker on their load terminals in the breaker box. Remove that sticker as now you have to connect these load terminals. The load side of the receptacles has one white and one black wire identified earlier.

How to attach a GFCI to a box?

Attach your ground wires to the green grounding screw of the GFCI. Fold your wires into the box, making sure the grounding wires do not touch any exposed"line" or "load" terminals. Attach the cover plate.

What is GFCI in electrical?

The National Electrical Code now requires Ground Fault Circuit Interrupter (GFCI) receptacles (also known as residual current devices or RCDs) to meet electrical code in kitchens, bathrooms, and outdoors (among other potentially wet places), at least for new installations. This device is installed in areas around water to provide extra protection ...

How to connect a hot wire to a receptacle?

Strip the wires with wire strippers, if necessary. Connect the white "line" wire to the silver (white) terminal and connect the black "line" wire to the brass "hot" terminal. Leave enough wire to allow the receptacle to be pulled at least 4 to 6 inches from the box. 3.

Can you use a GFCI receptacle in a half-switched box?

Some receptacles are configured to be "switched" and there may be "extra" wires in the box for that function. If the receptacle is intended to be "half-switched", meaning one outlet is switched and the other is not, you cannot use an ordinary GFCI receptacle in that location.

Can you wire a GFCI outlet?

Never wire a GFCI outlet where an item with a motor, like an appliance, is connected. The momentary electrical surge when a motor starts can cause the breaker to trip. It is fine in a bathroom, since hair dryers and shavers do not draw a lot of current.

Does a GFCI need a ground wire?

Top Answerer. A GFCI without a grounding wire will not provide "ground," but the mechanism to trigger upon a "ground fault" will work because it does not involve the ground wire - it only measures the current to and from the hot and neutral wires to make sure they are identical. Thanks!

Do I need a GFCI breaker?

1. Consider whether you need a GFCI circuit breaker. In some cases it may be best to have an electrician install a GFCI circuit breaker in the panel , rather than a GFCI receptacle. The GFCI breaker has a protected "hot" conductor, a separate neutral connection, as well as a test and reset button.

What is the difference between a GFCI outlet and a regular outlet?

Difference between GFCI outlet and a regular outlet. There is no significant difference between a GFCI outlet and a regular outlet. GFCI stands for “Ground fault circuit interrupters” are the same type of device if we are comparing it with GFI which stands for “Ground fault interrupters” only their names are different.

What happens when you use a single GFCI with multiple outlets?

When we are using a single GFCI with multiple outlets, then all of the outlets become out of power with the tripping of one GFCI. In other words, having a fault in one outlet would result in a power breakdown in the rest of the outlets connected with it. There are high possibilities of GFCI tripping due to overloading when we are using ...

How to install a GFCI without ground?

To install the GFCI outlet without ground, follow the below mentioned steps: Turn off the electric supply of your home from the main breaker. Identify the white “neutral “wire in the breaker box and the black “hot “wire. Simply connect the line side black and white wires of the breaker to the line side wir es of GFCI and load side black ...

How to connect electrical outlets in parallel?

In order to connect the wiring outlets in parallel, simply follow these two steps: Identify the black or hot wire entering from the circuit into the electrical box. Make the connection of this wire to the “wire nut” or twist on the connector.

Can a GFCI be replaced?

Yes, ungrounded GFCI outlets are replaced by a GFCI. A ground wire is not required for a GFCI to trip properly. It can still perform its operation without the presence of ground wire. When a fault is detected on the neutral wire, a GFCI simply trips.

Can a GFCI be installed without a ground wire?

One can install a GFCI outlet without having the ground wire. It can still perform its operation without its presence and cuts off the power supply when required. It instantly trips when after detecting the fault on the neutral wire. Any measurement unit like our tester will not trip on an ungrounded outlet.

Can I install a GFCI on one circuit?

Wiring GFCI outlets on one circuit. When we are installing the GFCI at the start of the line and the rest of the outlets are taken as load then we install only one GFCI outlet per circuit. In this case, a separate dedicated circuit is not needed to install the GFCI as a separate breaker is not required and it runs on the same breaker installed in ...

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version530msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[14:25:33] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[14:25:33] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[14:25:33] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[14:25:33] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[14:25:33] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[14:25:33] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:25:33] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:25:33] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:25:33] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:25:33] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:25:33] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:25:33] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (14.8ms)
  • Application (515ms)
  • 1 x Application (97.12%)
    514.98ms
    1 x Booting (2.79%)
    14.80ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed495ms
    • select * from `posts` where `published_at` <= '2025-06-12 14:25:33' and `slug` = 'how-to-install-a-gfci-outlet-with-4-wires' and `posts`.`deleted_at` is null limit 1
      2.41ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-12 14:25:33
      • 1. how-to-install-a-gfci-outlet-with-4-wires
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 53410 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      3.78msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 53410
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      540μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      370μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      280μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      487ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 48275 limit 1
      720μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 48275
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        4ekChGGYcH7tgc8SgwvdiwuchgR7NbiNuqLYHQlN
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-install-a-gfci-outlet-with-4-wires" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-to-install-a-gfci-outlet-with-4-wires
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=6d6815d94b04e7bb.1749718517.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IkpKc1pEMUlUdVdtM0ZXdUpBYkNUTnc9PSIsInZhbHVlIjoiZm15OVVsdGM3dlVsL0RFWUVtcTljZDJlOThVM3hlbzkrdDkyM1B3TjBWY25lbXlEVHc4OThCMVZrSWw3VHl5U3JKODZONmkwa3NnQTZibzk1ZTlUUDlJMFhzSTQxZUlxcVRpZ3VpR0gvYjVNT2lGdk11TFhSTDQwRzVtRUsycUYiLCJtYWMiOiJjZTM1ZjA1MjVlYjI1N2JmOGQwYTlkNmZjOTQwNjY4MDk3ZjA5NmI5OGYxY2EyZDcwZWVkZTg3NjQxM2RlNWE4IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InoyclI5MXdzQkRxRjkwTzdpR2NVSGc9PSIsInZhbHVlIjoiQkpmYmR2T2JrR2V2eWc3amZpQzk0alR5eFNCM0dpREVyQTFITFhlRVJMQTMvWnRTemNyZkZTa0dLTUVjSHFuOEZQSGdXVnRTeFpvRSsvL2JpVWFURXkwQVZwOUxjNTgvVFBjK3hubzZFM3VRZktnT2dINWIxamQ2SmNFalV0b0UiLCJtYWMiOiIyNDM5MjE1MmQxZmI0ZjM5MTcyNjU4NmUzNjA3YWUwMDNkNGI0MjRlM2ViY2JjMDAyZTlkZTQ1Mzg4YmVlZmMwIiwidGFnIjoiIn0%3D_pk_id.64.7c30=6d6815d94b04e7bb.1749718517.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IkpKc1pEMUlUdVdtM0ZXdUpBYkNUTnc9PSIsInZhbHVlIjoiZm15OVVsdGM3dlVsL0RFWUVtcTljZ" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.125" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94e821446a7de544-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.125, 172.69.59.217" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-to-install-a-gfci-outlet-with-4-wires" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-to-install-a-gfci-outlet-with-4-wires" "REMOTE_PORT" => "50264" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.59.217" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=6d6815d94b04e7bb.1749718517.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IkpKc1pEMUlUdVdtM0ZXdUpBYkNUTnc9PSIsInZhbHVlIjoiZm15OVVsdGM3dlVsL0RFWUVtcTljZDJlOThVM3hlbzkrdDkyM1B3TjBWY25lbXlEVHc4OThCMVZrSWw3VHl5U3JKODZONmkwa3NnQTZibzk1ZTlUUDlJMFhzSTQxZUlxcVRpZ3VpR0gvYjVNT2lGdk11TFhSTDQwRzVtRUsycUYiLCJtYWMiOiJjZTM1ZjA1MjVlYjI1N2JmOGQwYTlkNmZjOTQwNjY4MDk3ZjA5NmI5OGYxY2EyZDcwZWVkZTg3NjQxM2RlNWE4IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InoyclI5MXdzQkRxRjkwTzdpR2NVSGc9PSIsInZhbHVlIjoiQkpmYmR2T2JrR2V2eWc3amZpQzk0alR5eFNCM0dpREVyQTFITFhlRVJMQTMvWnRTemNyZkZTa0dLTUVjSHFuOEZQSGdXVnRTeFpvRSsvL2JpVWFURXkwQVZwOUxjNTgvVFBjK3hubzZFM3VRZktnT2dINWIxamQ2SmNFalV0b0UiLCJtYWMiOiIyNDM5MjE1MmQxZmI0ZjM5MTcyNjU4NmUzNjA3YWUwMDNkNGI0MjRlM2ViY2JjMDAyZTlkZTQ1Mzg4YmVlZmMwIiwidGFnIjoiIn0%3D_pk_id.64.7c30=6d6815d94b04e7bb.1749718517.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IkpKc1pEMUlUdVdtM0ZXdUpBYkNUTnc9PSIsInZhbHVlIjoiZm15OVVsdGM3dlVsL0RFWUVtcTljZ" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.125" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94e821446a7de544-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.125, 172.69.59.217" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749718533.8474 "REQUEST_TIME" => 1749718533 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "4ekChGGYcH7tgc8SgwvdiwuchgR7NbiNuqLYHQlN" "askhelpdesk_session" => "zLmNCCczVfjVHVlJowwYZPTz9642eZdQRJaakWl6" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Thu, 12 Jun 2025 08:55:33 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkRXeDNTSjRudkJjSkQ5SVhJWkxKV0E9PSIsInZhbHVlIjoiZ0QxMVJibXBPRTRhcnNtN1R6WWZQdlErTUZGL2hJenpZMHB1aTg2dWRoWndDcU1GMnRzRGRzeFJSV2RabjE1eFIwSTZSYTVtbWY4S2FJdXYxZkJKa095cDVvU1ZVTjRvQVVlejhOaDVkcy9WZkZ4ZXp5NFJwc3RqV3VWVWlDaTQiLCJtYWMiOiJmMTc0MmFlZjA5YmQ1ODBjY2Y4NmM4NWUzYzJhYTg1NTEwNmMwYTg5MzBiNDc1MzVjM2NlZjM1N2UzZDQ3ZDhiIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 10:55:34 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IkRXeDNTSjRudkJjSkQ5SVhJWkxKV0E9PSIsInZhbHVlIjoiZ0QxMVJibXBPRTRhcnNtN1R6WWZQdlErTUZGL2hJenpZMHB1aTg2dWRoWndDcU1GMnRzRGRzeFJSV2RabjE1eFIwSTZSY" 1 => "askhelpdesk_session=eyJpdiI6ImE5RWpUZklscEVhL0s4dkg2YkcrcGc9PSIsInZhbHVlIjoiVE5aTkROZ0ZkSnlRVzJSOW92ZVRidTNNak41NlZYc1NjdkhLNFB4NllHOEtFU3NheHRmaXN1L2Exby9hT3VUaGhQMHBkdmlxbFpKTGp0RlNBdUQ1NDV1VWphZWlxMmplcFJNaHB4cFpsSWhaeGowQzJhYUlKblh4V3hRNzI2dnIiLCJtYWMiOiJmYWY2ZGNmNWM2NTU4MzUyYzYzZDMyMmQyYjJhMjVhYjYwZTgzODkzMmRlMzNiODZlNzJiNGRjMzc2NTY0MzEzIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 10:55:34 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImE5RWpUZklscEVhL0s4dkg2YkcrcGc9PSIsInZhbHVlIjoiVE5aTkROZ0ZkSnlRVzJSOW92ZVRidTNNak41NlZYc1NjdkhLNFB4NllHOEtFU3NheHRmaXN1L2Exby9hT3VU" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkRXeDNTSjRudkJjSkQ5SVhJWkxKV0E9PSIsInZhbHVlIjoiZ0QxMVJibXBPRTRhcnNtN1R6WWZQdlErTUZGL2hJenpZMHB1aTg2dWRoWndDcU1GMnRzRGRzeFJSV2RabjE1eFIwSTZSYTVtbWY4S2FJdXYxZkJKa095cDVvU1ZVTjRvQVVlejhOaDVkcy9WZkZ4ZXp5NFJwc3RqV3VWVWlDaTQiLCJtYWMiOiJmMTc0MmFlZjA5YmQ1ODBjY2Y4NmM4NWUzYzJhYTg1NTEwNmMwYTg5MzBiNDc1MzVjM2NlZjM1N2UzZDQ3ZDhiIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 10:55:34 GMT; path=/XSRF-TOKEN=eyJpdiI6IkRXeDNTSjRudkJjSkQ5SVhJWkxKV0E9PSIsInZhbHVlIjoiZ0QxMVJibXBPRTRhcnNtN1R6WWZQdlErTUZGL2hJenpZMHB1aTg2dWRoWndDcU1GMnRzRGRzeFJSV2RabjE1eFIwSTZSY" 1 => "askhelpdesk_session=eyJpdiI6ImE5RWpUZklscEVhL0s4dkg2YkcrcGc9PSIsInZhbHVlIjoiVE5aTkROZ0ZkSnlRVzJSOW92ZVRidTNNak41NlZYc1NjdkhLNFB4NllHOEtFU3NheHRmaXN1L2Exby9hT3VUaGhQMHBkdmlxbFpKTGp0RlNBdUQ1NDV1VWphZWlxMmplcFJNaHB4cFpsSWhaeGowQzJhYUlKblh4V3hRNzI2dnIiLCJtYWMiOiJmYWY2ZGNmNWM2NTU4MzUyYzYzZDMyMmQyYjJhMjVhYjYwZTgzODkzMmRlMzNiODZlNzJiNGRjMzc2NTY0MzEzIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 10:55:34 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImE5RWpUZklscEVhL0s4dkg2YkcrcGc9PSIsInZhbHVlIjoiVE5aTkROZ0ZkSnlRVzJSOW92ZVRidTNNak41NlZYc1NjdkhLNFB4NllHOEtFU3NheHRmaXN1L2Exby9hT3VU" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "4ekChGGYcH7tgc8SgwvdiwuchgR7NbiNuqLYHQlN" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-install-a-gfci-outlet-with-4-wires" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]