Receiving Helpdesk

how to finish cherry plywood

by Alyce Gorczany Published 3 years ago Updated 3 years ago

Cherry Finish for Birch Plywood

  • Step 1. Mix two teaspoons of TransTint Golden Brown dye in 32 ounces of water. When applied to the bare wood, this...
  • Step 2. Apply a generous coat of clear gel varnish and rub it in to scrub off any grain-raising caused by the...
  • Step 3. Now you can safely darken the color to a rich, deep brown, because the wood is sealed against...

Part of a video titled Finish Test on Cherry + Cherry Plywood (WnW #146) - YouTube
0:39
15:32
And let me see how am I gonna do this I'm gonna do one section with just the polyurethane I'm gonnaMoreAnd let me see how am I gonna do this I'm gonna do one section with just the polyurethane I'm gonna do one section where I'm gonna do some shellac followed by polyurethane.

Full Answer

Can you finish cherry wood?

Oct 02, 2018 · Oil-Modified Polyurethane and other fun stuff!👇👇 Click “Show More” for Stuff you probably want to know! 👇👇📃Build Article: http://www.wordsnwood.com ...

How do you darken cherry wood?

Feb 17, 2020 · There is another technique, that I've never really used, but tested and it does work. This technique involves diluting baking soda in water and applying it to the cherry wood. This creates a chemical reaction with the wood and causes it to darken very quickly as well. For me, this is just too messy and complicated.

Can You stain birch plywood to look like cherry plywood?

What is the best oil finish for Cherry cabinets?

What finish is best for cherry wood?

At first, linseed and tung oil finishes give cherry a deeper, richer appearance than film-forming finishes like shellac, lacquer and polyurethane. But after a year or so, they'll all look pretty much the same. If you want to give cherry a dark color right away, don't use oil stain.

Can you stain cherry plywood?

You can stain any type of plywood with a cherry stain, but it won't look like cherry unless it has a similar grain. Alder, poplar and soft maple are the first choices when staining a hardwood plywood with a cherry stain.

How do you make plywood look like cherries?

Cherry Finish for Birch PlywoodQuickly apply a coat of diluted golden brown water-based dye, using a pump sprayer and a rag. ... Apply a generous coat of clear gel varnish and rub it in to scrub off any grain-raising caused by the water-based dye. ... Apply golden brown gel stain.More items...•

How do you finish black cherry wood?

For the money, it's best to go with an all-natural oil finish, typically using either tung oil or boiled linseed oil. While they are more work than any of the other finishes mentioned, as well as taking much longer to dry between coats, these wipe-on oil finishes give the cherry projects a rich color.

What stain is close to cherry wood?

Ellis Walentine: Maple and birch are the most common substitutes. Their grain patterns aren't quite the same, but with a dye stain, they can look a lot like cherry, at least at first glance. Cherry's color, of course, goes all the way through the wood, so you won't expose white wood if you chip an edge accidentally.

Is cherry wood hard to stain?

Less penetration limits the darkening of the wood, however, so there's a trade off. Staining is less effective. But cherry blotches even without a stain. All clear finishes (even shellac, which is often promoted as an exception) blotch cherry and, of course, so does a washcoat.

What finishes can be applied to plywood?

Exterior Plywood FinishesPainting – Painting is one of the most common finishes on plywood. ... Water Repellent Coat – Water repellent coatings are solvent mixtures from mineral spirits, paint thinners, wax, or drying oil. ... High-Density Overlay or HDO – This is the most popular type of overlay.More items...•

What is the best varnish for plywood?

Polyurethane. Polyurethane varnish is probably one of the most common finishes applied to projects made out of plywood, especially furniture projects made out of hardwood plywood. Polyurethane is easy to work with and gives an excellent finish, even with minimal skill.

Should you sand plywood before staining?

No matter what type of wood you have, sanding is a very important step to do before staining. You won't want to add stain to a plywood surface that hasn't been sanded. After sanding, you'll want to wipe the surface with a tack cloth. This removes the remaining wood dust that is left over from the sanding process.

Do I need to stain cherry wood?

Here's the bottom line on cherry: Most boards blotch when stained, and also when finished without a stain. There's no way to avoid this, other than finding boards (or veneer) that don't have the tendency. Over time the blotching is muted as the heartwood darkens naturally to a rust-red color.

How do you glaze cherry wood?

2:129:31How to Apply a Glazing Finish with Wood Stain - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then once you cover the whole surface you're going to go to a dry rag and wipe off the excess.MoreAnd then once you cover the whole surface you're going to go to a dry rag and wipe off the excess. So it doesn't look like a huge messy lock bunch of bunch of stain on it anymore.

What is the difference between cherry and black cherry wood?

Another difference between the two types of cherry wood is the color. Sweet cherry wood has more color contrasts than black cherry wood. It is also harder and more resilient compared to black cherry wood. Finally, it's not as common as black cherry wood, which may affect its price, especially in Northern America.

Baby steps

Creating a deep, uniform tone on birch plywood is a real challenge. Using regular dark-colored liquid oil-based cherry stains or dyes will result in unsightly blotching and/or a harsh unnatural color. Moreover, using stain or dye alone will not help blend the wood’s light and dark colors.

Sand carefully

Sand the plywood and edge banding to 150 grit. The final sanding should be by hand to ensure no machine marks. On some grades of birch plywood the veneers are super-thin and the surfaces aren’t perfectly flat, so be careful. It can be easy to sand through the veneer, especially when you’re flushing up the edge banding.

Step 1

Mix two teaspoons of TransTint Golden Brown dye in 32 ounces of water. When applied to the bare wood, this diluted golden tone provides a warm ground color without causing noticeable blotching. Blotching becomes more noticeable with dark-colored stains or dyes, so you shouldn’t use them for this step.

Step 2

2. Apply a generous coat of clear gel varnish and rub it in to scrub off any grain-raising caused by the water-based dye. Remove the excess varnish and then immediately move to the next step.

Step 3

4. Now you can safely darken the color to a rich, deep brown, because the wood is sealed against blotching. To simulate cherry, wipe on and rub off dark, reddish-brown gel stain.

Step 4

For a perfect hand-rubbed look, wipe on and rub off two more rounds of General Finishes Gel Topcoat. If you want a waterproof surface, apply one or more coats of General Finishes Satin Arm-R-Seal.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9