Receiving Helpdesk

how to check ground wire

by Glennie Mante Published 3 years ago Updated 2 years ago

Steps for checking ground wire with a multimeter

  • Step 1: Set voltage type. Ensure that your multimeter is set to measure AC voltage. Multimeters are ideal for testing...
  • Step 2: Attach leads. On your multimeter, there are two probes with different colors; red and black. At the end of the...
  • Step 3: Check reading. You should take a reading while the leads are in a live...

Touch one probe to the end of the ground wire and the other probe to the appliance electrical post. Check the voltage reading. It should be zero. Anything more than that means you have a broken wire, which will read 12.6 volts, or a shorted ground wire, which will read anywhere between 12.6 and 0.

Full Answer

How to test for a bad ground wire?

Signs & Symptoms of Poor Ground Connection in an Auto Battery

  • No-Start Condition. This is one of the more obvious signs of a bad ground, manifesting in much the same way as a loose battery cable or a dead battery.
  • Dim or Flickering Lights. You headlights will do the same thing as the starter, but will likely dim instead of dying outright.
  • Dead Battery. ...
  • Testing the Ground. ...

How to determine the ground wire?

Part 3 of 3: Grounding the Receptacle

  • On a GFCI receptacle you would connect to the two "Line" terminals. ...
  • Check the connection of the other wires as well. ...
  • While you're there, make sure any other connections in the box are tight, including wire nuts holding all wires securely, tucked out of the way, and any clips or screws ...

How to check for an ungrounded wire?

Test for Absent Ground . Now try placing one probe into the round hole and place the other probe into each of the two vertical slots (small and large slots) one at a time, to see if the tester lights. If it doesn’t light for either, the receptacle isn’t grounded. An ungrounded receptacle is a problem that should be addressed by an electrician.

How do you check for ground on aircraft wiring?

To connect an insulated type ring terminal to a wire, proceed as follows:

  1. Select the correct insulated terminal for the size of the wire to be connected. ...
  2. Using the wire crimper’s built-in wire stripper, insert approximately ¼" of the wire in the crimping tools’ stripping notch. ...
  3. Next, twist the bared wire strands a bit with your fingers. ...

More items...

How do I test a ground with a multimeter?

3:088:09Over here I will take one of the probe. Put it into the negative terminal. And I'll just quicklyMoreOver here I will take one of the probe. Put it into the negative terminal. And I'll just quickly show you if. I take this other probe. And stick it on to one of the grounding points on the engine.

How do you test for grounding correctly?

Insert one probe of the circuit tester into the small slot and the other probe into the large probe. If the circuit tester lights up, you have power to the outlet. Now place one probe in the small slot and the other probe into the "U" shaped ground hole. The indicator should light up if the outlet is grounded.

How do you test for a bad ground wire?

0:120:50You take one it'll jump a lead and connect it to a known good ground the engine.MoreYou take one it'll jump a lead and connect it to a known good ground the engine.

How do I know if my ground is bad?

Set the voltmeter to read ohms (resistance) and probe the battery's negative stud and ground connection on the accessory (the ground terminal on an amp, for example). If you have a reading less than five ohms, the ground is okay.

How many ohms is a good ground?

zero ohmsIdeally a ground should be of zero ohms resistance. There is not one standard ground resistance threshold that is recognized by all agencies. However, the NFPA and IEEE have recommended a ground resistance value of 5.0 ohms or less.

How do you test a ground wire with a test light?

The test light is the go-between. If you connect one end to the positive power source and the other end to a good ground, it lights up. To test for positive voltage, attach one end to a known ground, and touch the other end to the wire you want to test. If it lights up, you're good.

How do you fix a bad ground?

10:2813:26Between the car body and the engine. Take them off and simply clean them also check that the minusMoreBetween the car body and the engine. Take them off and simply clean them also check that the minus battery terminal and clamp is cleaned. And properly tightened.

How do you fix a grounding problem?

How to Fix Electrical Wiring in the Home With Electrical Ground...Shut off the main electrical power.Find the grounding rod driven into the ground. ... Check the ground connection clamp. ... Check the ground wire running to the copper or galvanized water service inside the house.More items...

Why do I have voltage on my ground wire?

Stray voltage occurs when electricity “leaks” from the black wire directly to the white or ground wires before passing through the device to be powered. These leaks produce only small amounts of electricity. Direct contact between the white and black wires would “short” the system and blow a fuse or circuit breaker.

What happens if ground wire is not connected?

The appliance will operate normally without the ground wire because it is not a part of the conducting path which supplies electricity to the appliance. In fact, if the ground wire is broken or removed, you will normally not be able to tell the difference.

How to test a DC ground wire?

To test a DC circuit ground wire, remove it from the appliance to which it is connected, such as the radio, heater fan or cigarette lighter. Set your multimeter to 20 volts DC. Touch one probe to the end of the ground wire and the other probe to the appliance electrical post. Check the voltage reading. It should be zero.

What type of wire is ground?

There are two types of ground wires: a household AC, or alternating current, and an automotive-type DC, or direct current. The household ground wire, when working properly, should not carry any current at all.

How many volts does a DC ground wire carry?

A DC ground wire in an automotive-type circuit, although always referred to as a 12-volt circuit, will actually carry 12.6 volts of electricity to complete the circuit on an automotive-type wiring system. This system could be in a car, motorcycle or truck. Advertisement.

What to do if a tester does not read proper voltage?

If the tester does not read proper voltage when you have one probe in the smaller slot and the other probe in the ground opening, then keep the probe that is inside the ground opening in place and move the other probe over to the large (neutral) slot.

What happens if a voltage tester is not working?

If the tester reads no voltage, then either the circuit breaker is tripped or turned off (or the fuse blown) or else , the tester could be faulty. Check another receptacle (that you know is working) for voltage to rule out a bad voltage tester.

What is a voltage tester?

Voltage tester or Multimeter. What You'll Need. Voltage tester or Multimeter. Testing for ground can be performed using either a multitester or a basic voltage tester. This test ensures that the ground on the circuit is connected to the outlet and that it is working.

What is the small slot on a receptacle?

The small slot is the “hot” side of the receptacle and the large slot is the “neutral” side. The U-shaped hole is for the ground prong. Take one of the probes of your tester and slide it into the larger slot on the outlet, then insert the tip of the other probe into the small slot.

How to test for reverse wire?

Test for Reversed Wiring. Place one probe into the long vertical (neutral) slot and the other probe on the center screw of the cover plate. If the tester lights, you have established that the receptacle is wired incorrectly—the hot wire is attached improperly to the neutral slot on the receptacle.

How to tell if a 3 slot receptacle is grounded?

Three-slot receptacles usually indicate that you have a newer wiring system or one that has been upgraded to more modern standards. Here, the third, round receptacle slot is the ground connection.

How to test a polarized receptacle?

To test for power on a polarized receptacle, place one probe of the neon circuit tester in the smaller slot and the other probe into the larger slot. If the tester lights, you have established that the receptacle is powered up and you can continue testing.

Why is a home grounding system important?

The home grounding system is an important safety feature, designed to help channel electricity "to ground" in the case of a short circuit. A properly grounded electrical system is much less likely to cause fires or shocks if a short circuit should occur.

Why do you test receptacles?

Testing receptacles are also helpful if you do your own electrical repairs. It will help you determine if the power is off before you work on wiring, and will also verify that you've done repair work correctly. Depending on the age of your house, your receptacles will be one of two types.

What happens if a receptacle tester doesn't light?

The tester should also light in this position. If the tester does not light, there are two possibilities: either the receptacle's wiring is reversed, or there is a missing ground. If it doesn’t light at all, continue to the next test.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version2.5sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[12:54:38] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[12:54:38] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[12:54:38] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[12:54:38] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[12:54:38] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[12:54:38] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (11.51ms)
  • Application (2.49s)
  • 1 x Application (99.53%)
    2.49s
    1 x Booting (0.46%)
    11.51ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.47s
    • select * from `posts` where `published_at` <= '2025-06-12 12:54:38' and `slug` = 'how-to-check-ground-wire' and `posts`.`deleted_at` is null limit 1
      3.5ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-12 12:54:38
      • 1. how-to-check-ground-wire
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 90508 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      7.18msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 90508
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      710μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      370μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      200μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.45s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 42293 limit 1
      870μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 42293
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        hbA9VYAiNhIlew8JYWc07y62yzjOPIUdX8RNQkQK
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-check-ground-wire" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-to-check-ground-wire
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "XSRF-TOKEN=eyJpdiI6IktuT2JGTTlPNU9ycU5EcVFvaEVlZXc9PSIsInZhbHVlIjoiWURVVXYyZTFVeVRxa3NwOWlmNVBIZU5LUUovcEg1Um1hVXRtV2xPbnZ0OFRWOC9HTlJhRi9ZRVR5S0k0TXhGVzRnL1o3b2cra3owRGdoTWkzdVd2L2txNDE0Q3NJK2lOK2gwUlZuWGxWdnJpRUxsZlQzVVlqelpPUFBkUHk2UTgiLCJtYWMiOiI1NTQ5M2YwYTczMWIyNjEzZjMwNWY1MWEyN2YwODhjYWFkODM3NjBlYTlhMGY0ZmFmZTkwMDk0NTYwYzMwYTA3IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IkRwYW5PaXNZL2VndGt6ejhwZlZQeWc9PSIsInZhbHVlIjoieEpUOEpIRU53VHhCSUcwR3N0eEdjMWtRemhUak55dzRCSjRhelhZWXcyUnN2dFhBUDhHV0U2d0txSmJhcTlJeFBVRHlTT09lWjFueU5ibmVLbVU3czNHd0w1cENaQnB1TVRjcFp0MDlFR1ZkMnUyVzRya0crL1hUWURVQ1UvdWQiLCJtYWMiOiJhNDdlZDY1ZmZiYTYzMjgyMjAxYzk2MTkxOTExNDIwYWU4OGE0MmZlZjMzN2JiZTFhOTUyZmM3MTE0MDY1NDllIiwidGFnIjoiIn0%3D; _pk_id.64.7c30=d614bb28aa37b404.1749713078.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6IktuT2JGTTlPNU9ycU5EcVFvaEVlZXc9PSIsInZhbHVlIjoiWURVVXYyZTFVeVRxa3NwOWlmNVBIZU5LUUovcEg1Um1hVXRtV2xPbnZ0OFRWOC9HTlJhRi9ZRVR5S0k0TXhGVzRnL1o3b" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.125" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94e79c14191410f7-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.125, 172.69.58.63" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-to-check-ground-wire" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-to-check-ground-wire" "REMOTE_PORT" => "43324" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.58.63" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "XSRF-TOKEN=eyJpdiI6IktuT2JGTTlPNU9ycU5EcVFvaEVlZXc9PSIsInZhbHVlIjoiWURVVXYyZTFVeVRxa3NwOWlmNVBIZU5LUUovcEg1Um1hVXRtV2xPbnZ0OFRWOC9HTlJhRi9ZRVR5S0k0TXhGVzRnL1o3b2cra3owRGdoTWkzdVd2L2txNDE0Q3NJK2lOK2gwUlZuWGxWdnJpRUxsZlQzVVlqelpPUFBkUHk2UTgiLCJtYWMiOiI1NTQ5M2YwYTczMWIyNjEzZjMwNWY1MWEyN2YwODhjYWFkODM3NjBlYTlhMGY0ZmFmZTkwMDk0NTYwYzMwYTA3IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IkRwYW5PaXNZL2VndGt6ejhwZlZQeWc9PSIsInZhbHVlIjoieEpUOEpIRU53VHhCSUcwR3N0eEdjMWtRemhUak55dzRCSjRhelhZWXcyUnN2dFhBUDhHV0U2d0txSmJhcTlJeFBVRHlTT09lWjFueU5ibmVLbVU3czNHd0w1cENaQnB1TVRjcFp0MDlFR1ZkMnUyVzRya0crL1hUWURVQ1UvdWQiLCJtYWMiOiJhNDdlZDY1ZmZiYTYzMjgyMjAxYzk2MTkxOTExNDIwYWU4OGE0MmZlZjMzN2JiZTFhOTUyZmM3MTE0MDY1NDllIiwidGFnIjoiIn0%3D; _pk_id.64.7c30=d614bb28aa37b404.1749713078.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6IktuT2JGTTlPNU9ycU5EcVFvaEVlZXc9PSIsInZhbHVlIjoiWURVVXYyZTFVeVRxa3NwOWlmNVBIZU5LUUovcEg1Um1hVXRtV2xPbnZ0OFRWOC9HTlJhRi9ZRVR5S0k0TXhGVzRnL1o3b" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.125" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94e79c14191410f7-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.125, 172.69.58.63" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749713078.4297 "REQUEST_TIME" => 1749713078 ]
        request_cookies
        0 of 0
        array:4 [ "XSRF-TOKEN" => "hbA9VYAiNhIlew8JYWc07y62yzjOPIUdX8RNQkQK" "askhelpdesk_session" => "32fZxslCSD03lVlwfDZr72AAsOdRYetwae39NkNK" "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Thu, 12 Jun 2025 07:24:38 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InJoR0Izbll2K2dxdUV4cWdVMEtCalE9PSIsInZhbHVlIjoiTTN3UXN0S1FZMDZkTnczUjZlOGJMT2t5UVhQQ1gzZmM2eHBsZ1hyY3BlaHdsMlJDd3htV3htQmhqSXZCN0hpRmF5RDAwWHJxSTY2aFhTTEhpUG5RYmV3Z3B6L20veW5uaXB4RlV0NTQrR0hnU1lqM3J6WEdKWGZXSUptbGVwZWYiLCJtYWMiOiIwMzU5NTE1ZTA1NDNiNWQ4NGM3MTE1NmNmOThjODRkYWExYzhhZTNhMTBjN2M1MDY2OGE5ZWJjYTViMTg1ZmMwIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 09:24:40 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6InJoR0Izbll2K2dxdUV4cWdVMEtCalE9PSIsInZhbHVlIjoiTTN3UXN0S1FZMDZkTnczUjZlOGJMT2t5UVhQQ1gzZmM2eHBsZ1hyY3BlaHdsMlJDd3htV3htQmhqSXZCN0hpRmF5RDAwW" 1 => "askhelpdesk_session=eyJpdiI6Ink0S2xxc1RUYW9rTHN5MkVsRmljbHc9PSIsInZhbHVlIjoiVVZ6ZDAwRFJVTHduaEQ0amR6ck1IRHQ3MTJhUFliVlpmSW1WNXhZR2d0bmZscnB1bCtqUUlyOWdUVmtOSHAvMjNteXZhaWEwaVVRUk9iMzNVMUVEbW9lSVZDY2RWNDBFOEtQWFpValEwbWtSZ3RDZVRWaldTTmltWHptZUpBNGsiLCJtYWMiOiIzNDdlNjMzYjg5MGVjY2JiMzcxNDc1YjIxZjcxYzRlNjg4NjY5YWYxNWFmYTA3MGFkM2U2NzMxYWQxNDcxYmQyIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 09:24:40 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6Ink0S2xxc1RUYW9rTHN5MkVsRmljbHc9PSIsInZhbHVlIjoiVVZ6ZDAwRFJVTHduaEQ0amR6ck1IRHQ3MTJhUFliVlpmSW1WNXhZR2d0bmZscnB1bCtqUUlyOWdUVmtOSHAv" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InJoR0Izbll2K2dxdUV4cWdVMEtCalE9PSIsInZhbHVlIjoiTTN3UXN0S1FZMDZkTnczUjZlOGJMT2t5UVhQQ1gzZmM2eHBsZ1hyY3BlaHdsMlJDd3htV3htQmhqSXZCN0hpRmF5RDAwWHJxSTY2aFhTTEhpUG5RYmV3Z3B6L20veW5uaXB4RlV0NTQrR0hnU1lqM3J6WEdKWGZXSUptbGVwZWYiLCJtYWMiOiIwMzU5NTE1ZTA1NDNiNWQ4NGM3MTE1NmNmOThjODRkYWExYzhhZTNhMTBjN2M1MDY2OGE5ZWJjYTViMTg1ZmMwIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 09:24:40 GMT; path=/XSRF-TOKEN=eyJpdiI6InJoR0Izbll2K2dxdUV4cWdVMEtCalE9PSIsInZhbHVlIjoiTTN3UXN0S1FZMDZkTnczUjZlOGJMT2t5UVhQQ1gzZmM2eHBsZ1hyY3BlaHdsMlJDd3htV3htQmhqSXZCN0hpRmF5RDAwW" 1 => "askhelpdesk_session=eyJpdiI6Ink0S2xxc1RUYW9rTHN5MkVsRmljbHc9PSIsInZhbHVlIjoiVVZ6ZDAwRFJVTHduaEQ0amR6ck1IRHQ3MTJhUFliVlpmSW1WNXhZR2d0bmZscnB1bCtqUUlyOWdUVmtOSHAvMjNteXZhaWEwaVVRUk9iMzNVMUVEbW9lSVZDY2RWNDBFOEtQWFpValEwbWtSZ3RDZVRWaldTTmltWHptZUpBNGsiLCJtYWMiOiIzNDdlNjMzYjg5MGVjY2JiMzcxNDc1YjIxZjcxYzRlNjg4NjY5YWYxNWFmYTA3MGFkM2U2NzMxYWQxNDcxYmQyIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 09:24:40 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6Ink0S2xxc1RUYW9rTHN5MkVsRmljbHc9PSIsInZhbHVlIjoiVVZ6ZDAwRFJVTHduaEQ0amR6ck1IRHQ3MTJhUFliVlpmSW1WNXhZR2d0bmZscnB1bCtqUUlyOWdUVmtOSHAv" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "hbA9VYAiNhIlew8JYWc07y62yzjOPIUdX8RNQkQK" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-check-ground-wire" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]