Receiving Helpdesk

how to build washer game

by Garfield Hills Published 4 years ago Updated 2 years ago

Part of a video titled How To Build A Washer Toss Game - YouTube
0:26
9:21
Saw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three andMoreSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three and a half inches on my table saw to simplify things you could also just use a 2 by. 4.

Full Answer

How do you make a washer board game?

To build a washer game, start by determining which playing style you’re building the game for, like 3-hole boards or 1-hole boxes. Then, cut 4 pieces of 2-by-4’s and screw the corners together to create a square frame.

What is a game of washers?

Washers is a family-oriented skill game that is easily portable, can be set up in a couple seconds, and is considerably safer than horseshoes. For starters, a game of washers replaces the heavy iron rings used in horseshoes with simple steel washers from the hardware store.

How many washers do I need to make a winnable game?

Add both washers and subtract from 18 = 10) If you make all three washer in the same hole on your turn you automatically win the game. The build is pretty simple and straight forward, here is what you need. sheet of plywood cut to 16"x48" (two of these) NOTE- We made two sets of these but this instructable is for one set.

What do you need to make a washer toss game?

This washer toss game is really fun to play, and it's easy and cheap to make. It requires few materials, including: 2x4, plywood, pvc, washers, screws and glue. Go to the next step for necessary pieces and tools.

What are the dimensions for washers game?

16 by 16 by 4 inchesWasher pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.

How do you make your own washer?

0:422:13Making Your Own Washer - Quick Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey did is he took a penny put it in the drill press of ice. Came down drilled a hole through it.MoreThey did is he took a penny put it in the drill press of ice. Came down drilled a hole through it. Put his little bolt through it or his lag bolt here. Looks like a sheet metal screw drill it anyway.

How do you make a washer pit?

0:004:30How to Build a Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut two pieces of 3/4 inch plywood. You can also use half inch plywood that would work if that's allMoreCut two pieces of 3/4 inch plywood. You can also use half inch plywood that would work if that's all you have my plywood is 16 inches square find and mark the center of the plywood squares.

How far apart are washers games?

20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play. Games can be played 1 vs 1 or teams of 2 vs 2.

How do you make a 3 hole washer game?

How to Build 3 Hole Washer Boards:Cut wood for the frame. ... Cut the rest of the wood. ... Next, lay two of your longer pieces of 2x4s and two of the shorter pieces on top of one of your plywood pieces to form a box shape. ... Add the wood screws. ... Screw the top frame. ... Make your 2nd box. ... Mark for your holes. ... Cut your holes.More items...

How do I make a hillbilly horseshoe?

0:058:34How To Build - Washer Board (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.

How do you make a washer game box?

4:429:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then onto the larger piece of carpet to make sure everything would stick well. I carefullyMoreAnd then onto the larger piece of carpet to make sure everything would stick well. I carefully positioned the carpet inside the box and pressed it down to make sure I had a good bond with the plywood.

How far apart are washer pits?

25 feetThis is a singles and doubles event. The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup.

How do you make a ring toss carnival game?

How to Play the Cola Ring Toss Carnival Game: Carnival players are given five rings to try their hand "ringing" one of the individual glass sodas. If they ring a soda, they get to keep a two liter bottle soda as their carnival prize.

How many washers do I need for a washer toss?

TOSSING TALLIES Similar to cornhole, the game is played in rounds until one team reaches 21 points. Points are scored based on how close to the cup or hole the washers are thrown. Once all eight washers are tossed, the points from the round are added together.

How do you play washer with 5 holes?

The object of the game is to try to toss a washer into one of the 5 target holes. Play continues until one player or team reaches 21 points exactly after all 6 washers have been tossed in any one round. If a team/player goes over 21 points in any one round, no points are scored. 21 points exactly wins the round.

What are the dimensions of a 3 hole washer board?

Technical DetailsItem Package Dimensions L x W x H‎32 x 12 x 5 inchesItem Dimensions LxWxH‎32 x 12 x 5 inchesBrand Name‎PIPROXWarranty Description‎NoModel Name‎PIPROX3 more rows

How many washers can you play in a game?

You can play with four was hers or two. Scoring can be done based on where the washer lands or based on the washer actually making it into the box or cup. The way we were taught to play is as follows: Each team gets 2 washers to toss. One member from each team takes turns tossing the washers.

How many points do you need to win in a washer game?

If a player lands the washer on the edge of the box and the opponent does not knock it off in their turn, the game is over. You must score exactly 21 points in order to win. You cannot go over.

How many points is a washer in a cup?

A washer in the cup is worth 5 points. A washer within 12″ of the front or side of the box is worth 1 point. If a player scores points and the opposing team scores the same points, the score is a wash at 0 points.

Step 1: Materials

We need the following: 4 - 16 inch 2x4 4 - 13 inch 2x4 8 - 1/2 inch washers, or any size washers that suit you 2 - 3 inch PVC couplings 2 16 inch squares of plywood. I used 3/8 inch.

Step 2: Wood

I got construction grade 2x4 that was 10 feet long. I would recommend if you have a bit more money to upgrade to higher grade wood, thats less likely to have splits and what not.

Step 3: Make the Box

I first pre-drilled all my holes, not all the way through, but a little bit. Makes the screw go straighter and its nice. I used wood screws to hold the pieces together. I also used a pipe clamp to hold the wood in place while I screwed it together. It is really easy to make the frame for the box. You need to make 2 of the boxes.

Step 4: Washers and PVC

If you want to color your washers, take 4, and spray paint them one color, and then spray paint another 4 a different color. you don't need to color them, but it makes it nice. IF YOU WANT TO PAINT THE BOXES, do that before you put the PVC in, because it will be much much much easier. Also, sand sand sand sand the entire thing.

Step 5: Other Ideas

You can add some sort of handle mechanism or even latches to keep everything secure for travel. I added handles made from some spare rope I found in the garage.

Washers vs Horseshoes

For starters, a game of washers replaces the heavy iron rings used in horseshoes with simple steel washers from the hardware store.

Washers: A Game With Many Names

Like most backyard games, washers is known by a number of different names, depending on which part of the country you’re playing in. Some of these include:

Washer Game Board Configurations

With the many different varieties of washer games that exist, you will see some slightly different box configurations that are used.

How To Play Washers

The official rules for playing a game of washers very much resemble the rules for playing horseshoes.

Build Your Own Washers Game

For those handy with a few tools it’s a simple matter to build your own fun washers game.

Where To Buy Washers Games

I’ve been involved in RVing for 50 years now — including camping, building, repairing, and even selling RVs. I’ve owned, used, and repaired almost every class and style of RV ever made. I do all of my own repair work. My other interests include cooking, living with an aging dog, and dealing with diabetic issues.

How many washers per player?

Basically, the board consists of four holes close to each corner of the board with one hole in the middle. You’ll need to use six washers per player.

How many points do you get in a washer board game?

Here are some basic rules for playing three-hole washer board game: If you get your washer in the hole closest to you, you’ll get one point. The middle hole is worth three points and the hole farthest from you is five points.

How to determine who is playing first in baseball?

In order to determine who’s playing first, you can use the already mentioned diddle. A player from each team should toss and the washer closest to the hole determines the first pitcher. The player or team who scored last throws first once the game starts. Remember that only one player or team per round may score.

How many washers do you need to throw in a round of golf?

The first player throws both of them, one at a time. The scoring is determined by the proximity of the washer to the cup. Only one player can score per round.

How far apart should you measure a washer pit?

Washer pit distance. The distance between the two pits is completely up to you. Most players recommend that you measure a distance of 25 ’ from the center of one cup to the center of the other. Of course, the greater the distance, the more difficult the game.

How many bags are in a pitcher box?

The same rules apply as for the singles play and each player has 4 bags to pitch. Official rules for playing washers state that the player must pitch with the underhand throw.

How far should a box be from a thrower?

The distance between the boxes should be approximately 20 feet. Most of the time players determine the distance by using a string, a rope or a chain attached to the front of both boxes. The thrower should be standing next to or behind one box while tossing washers toward the other.

Cut the Plywood and PVC Pipe

Cut the plywood and PVC pieces to the measurements outlined below. Clean up the edges with sandpaper but avoid rounding them. Sand the surfaces to smooth as needed.

Assemble the Sides

Drill and countersink two pilot holes 3/8 inches from each end of each 16-inch board and 1 inch from each long edge.

Paint

If you want to paint the PVC pipe and drain, sand them and use spray paint that adheres to plastic.

Install the Carpet, Felt or Fleece

Find the center of your square by measuring across the middle from opposite corners. Make a line an inch or two long at the middle.

Attach the Base to the Sides

Situate a 16-inch plywood square on top of one side square. Align the corners and clamp the whole piece to your work surface.

Place the PVC Pipe

Turn the drain upside down and drill three 1-inch wood screws with washers through the existing holes to secure it to the base.

Attach the Latches and Handle

Lay one box on your work surface and lay the other one on top of it. They should be face to face. When they are aligned correctly, clamp them to the table.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9