Cut a hole 1/4" larger than the washer all the way around (1/2" diameter larger). Covered in carpet and glued a capped piece of PVC
Polyvinyl chloride
Polyvinyl chloride is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. About 40 million tonnes are produced per year.
How do you make a washer board game?
To build a washer game, start by determining which playing style you’re building the game for, like 3-hole boards or 1-hole boxes. Then, cut 4 pieces of 2-by-4’s and screw the corners together to create a square frame.
What are the different types of washer boards?
There are a lot of variations to the washer game. Whether your rules require 3 hole boards, one hole boxes, nesting 3 hole boards, octagon boxes, or washer pits, make sure you design your board accordingly. Gather your materials.
How to drill a hole in a plywood wall?
Measure and drill 4" holes on the plywood at 14", 28" and 40" on center Dont use a harbor freight drill to drill these holes, it will die a horrible death. cut the cheap 1"x2" to around 2" chunks align the 4" pipe with the hole on the plywood
How far apart should the washer toss boxes be?
The washer toss boxes should be 21 feet apart with the distance adjusted for skill. Thanks! Include your email address to get a message when this question is answered. Video . By using this service, some information may be shared with YouTube. Set the two boxes on the grass 15 to 25 feet (4.6 to 7.6 m) apart.
How do you make a washer toss board?
0:004:30How to Build a Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn this video I'll show you how to build a washer toss. Game hi I'm AJ and you're watching woodaMoreIn this video I'll show you how to build a washer toss. Game hi I'm AJ and you're watching wooda fied i make DIY in woodworking videos if you'd like to learn how to do stuff yourself please subscribe
What are the dimensions of a washer toss box?
Washer pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.
What are the dimensions of washer boards?
Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long. Our preference is for 16″x48″, which is what these directions are based on.
How far apart are washer boards?
Washer boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.
How do you make a washer?
0:054:04How to Make the Game Washers | Great for the Summer! - YouTubeYouTubeStart of suggested clipEnd of suggested clipEight five eighths inch washers a bag of sand. Some wood screws about 20 feet in chain. Some epoxyMoreEight five eighths inch washers a bag of sand. Some wood screws about 20 feet in chain. Some epoxy as well as a water resistant finish and two cans of spray paint in any color of your choice.
What is the distance for washer toss?
20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play.
How do I make a hillbilly horseshoe?
0:058:34How To Build - Washer Board (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.
How do you score washers?
Scoring in washers is simple! A team earns one point if a washer lands inside the box. Three points are earned if a washer is inside the cup. Points cancel out so if you both land in the cup no points are scores.
How do you play a single hole washer?
1:092:58How To Play Washer Toss - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe game begins with players alternating throwing their washers to the target. Box the washers canMoreThe game begins with players alternating throwing their washers to the target. Box the washers can be thrown any way the player chooses. Once each player has thrown all their washers the round is.
What happens if you go over 21 in washers?
Winning the Game: The first player or team to reach no more and no less than 21 points wins the game! The round must be complete. If a score exceeds 21 points a penalty is incurred. If you go over 21 points your score is reduced by the number of points you scored to cause you to exceed 21.
How do you make a washer toss game box?
0:419:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipI used a piece of half-inch plywood mitt to make up the bottoms of the game boards. And cut two ofMoreI used a piece of half-inch plywood mitt to make up the bottoms of the game boards. And cut two of them at 16 inches square on my table saw a circular saw would work just fine for this as well.
How large is the cup in the center of an official washer toss game?
The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup.
How many washers do you need to play the game of the sandbox?
When the box is unlatched, the bottom and the top come apart. At the center of each part, there is a PVC pipe. You need a set of 8 washers to play the game.
How many times do you throw washers in a game?
The first team will throw their washers one by one. If there are two players in each team, then each teammate has to toss twice. Once they have thrown all eight washers, scores are recorded, and the players change sides. Then the next round begins.
What happens after every turn in a washer?
After every turn, the participants have to go and inspect which washer has gone closer to the cup. Sometimes, a player may end up pushing the opponent’s washer toward the cup. If that happens, the lucky player will win the round.
Is washer toss scoring the same?
Washer toss scoring is not the same in all places. However, if you are new to the game, you can remember a basic system.
Does washer toss require a large space?
A great thing about washer toss is that it does not require a large space. The box is small. Washer toss boxes are easy to transport. And the box can hold all the washers. The game’s popularity is indebted partly to this easy transportability. Here are the best places to play the game:
How many washers per turn?
Each competitor pitches three - three inch washers per turn. (i.e., one competitor pitches three washers and then the other competitor pitches three) Turn determined by last competitor to score. (i.e., even if the last person to toss scores zero, but cancels points scored by competitor in that round.)
How many 3" pieces of ABS pipe?
cut your ABS pipe into six 3" (measure the depth of yours to double check) parts
How to make a splash of color on washers?
If you’d prefer a splash of color, use spray paint. Bring your washers out, too, and paint them, four of one color and four of another color. Another option is to mark them with different designs in permanent marker. Have the kids come up with something creative.
How to secure wood to a box?
Predrill two holes through the longer boards and into the shorter boards with a drill bit that’s slightly narrower than your 3-inch screws. Use your drill/driver to secure the wood together with those screws and repeat for each corner, position it in the box, and hold it steady until it is set.
How many points do you get in a washer game?
Scoring takes place after all eight washers have been tossed. Only one team scores per round. One point is awarded for each washer inside the box, and three points for each washer inside the cup. If Player A lands two in the box (2 points) and Player B tosses one in the cup and one in the box (4 points), Player B’s team scores two points (the difference between each player’s total). The team that scored last tosses first in subsequent rounds. The first team to reach 21 points wins. If luck is on your side, and you manage to land a washer on top of one of the box edges, you automatically win the game!
How to cut a carpet into squares?
Cut the carpet into two 13x13-inch squares. Flip them over and draw lines from corner to corner to help you find the center. Position the PVC coupler in the center (about 4¼ inches from each carpet edge) and trace the outside and inside edges.
How to make a square with 2x4s?
Step 1. Cut the 2x4s and plywood to size and sand them smooth. For each box, position four 2x4s (two 16-inch lengths and two 13-inch lengths) on a level surface with the narrow edge down and equal-sized boards at opposite sides to create a square. To hold this together, a couple of clamps should work.
How to attach carpet square to plywood?
Place the carpet square in the box using all-purpose adhesive to secure it to the plywood if you aren’t using adhesive-backed carpet. Apply a bead of the adhesive to the bottom of the PVC coupler. Glue the cut out carpet circle inside. Attach utility handles to your boxes and carry them out to the yard!
How many 2x4 pieces can be cut?
Take the materials list with you to the store. The eight 2x4 pieces can be cut from two 6-foot boards. If you don’t have a saw back at the cabin, ask the staff at the store if they are able to cut them to size for you. The same goes for the plywood squares.
How many washers can you play in a game?
You can play with four was hers or two. Scoring can be done based on where the washer lands or based on the washer actually making it into the box or cup. The way we were taught to play is as follows: Each team gets 2 washers to toss. One member from each team takes turns tossing the washers.
How many points do you need to win in a washer game?
If a player lands the washer on the edge of the box and the opponent does not knock it off in their turn, the game is over. You must score exactly 21 points in order to win. You cannot go over.
How many points does a washer toss have?
Each team takes turns tossing the washers to the other game board, trying to score points. The team that reaches 21 points first, without going over, is the winner.
What adhesive do I use to put carpet on a game board?
Once the epoxy had hardened, I added the carpet to the game board. I used DAP RapidFuse All-Purpose Spray Adhesive for this. I unrolled some paper onto my workbench to protect it from getting sticky and laid the carpet pieces on it. I sprayed the circle piece first and then firmly set it in place inside the cup.
How do I cut a cup out of carpet?
To cut away the center portion of the carpet, I marked the center of the carpet square, then centered the cup over it. I traced the inside and outside edge of the cup on the carpet and then cut it out, starting with the outer line. Once the circle was cut away, I fit it into the box and then cut away the inner circle to fit inside the cup.
How many teams can score on each turn in the washers?
Once the washers are tossed, the score is tallied. Only one team can score on each turn.
What is the bottom of a game board lined with?
The bottom of the game boards are lined with outdoor carpet. I measured the inside dimensions of the frame and marked those measurements on the carpet with a ruler. I used a sharp pair of scissors to cut the square out and fit it inside the frame and trimmed as needed.