What are the dimensions for washers game?
Official 3 Hole Washer Board Dimensions: Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long. Our preference is for 16″x48″, which is what these directions are based on.
What do you need to build washer game?
How to build a washer toss game2 – 2×4 boards @ 8′ long (or 2 -2×6 boards ripped to 3 1/2″ wide)2′ x 4′ x 1/2″ plywood.4″ pvc pipe (1 bought one 2′ long)Indoor/outdoor carpet (sold in bulk by the foot. ... 1″ washers (you'll need 4 to 8 of them depending on how you want to play)spray paint for washers.More items...•13-Jul-2020
What size washers do you use for washer toss?
Usually metal or plastic, washers are thin, disk-shaped plates that have a hole in the middle. The size varies, but game pieces are typically two to two-and-a-half inches in diameter with a one inch hole in the middle. Most games use four washers per team – although some variations use three – for a total of eight.
How do you set up a washer game?
0:342:58How To Play Washer Toss - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce each player has thrown all their washers the round is. Over. Three points are scored for aMoreOnce each player has thrown all their washers the round is. Over. Three points are scored for a washer in the center pipe one point is scored for a washer in the box. No points are scored for washers.
How far apart are washer toss games?
20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play.
How do you make a 3 hole washer toss?
0:103:31How to Make Washer Boards! (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the plywood and cut it to forty six and three-quarter inches long and 14 and three-quarterMoreTake the plywood and cut it to forty six and three-quarter inches long and 14 and three-quarter inches wide because the one by fours are going to bring the outside of the. Plywood.
How do you score in washers?
Scoring in washers is simple! A team earns one point if a washer lands inside the box. Three points are earned if a washer is inside the cup. Points cancel out so if you both land in the cup no points are scores.20-Jun-2012
How do you make a single hole washer board?
2:305:31How to build Washers - DIYHomegames - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by marking a line down the center of the board. Now mark the center of each hole on the centerMoreStart by marking a line down the center of the board. Now mark the center of each hole on the center line measure.
What are the rules for washer boards?
Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.
How many washers are needed for washers game?
The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup. Players are not allowed to step in front of the box.
How do I play a disc toss?
In singles play, both contestants toss from the same target. 2) In doubles play, the first side of contestants alternate tossing discs until they have both tossed, then the remaining contestants continue to alternate in the same manner until all discs are delivered.
How do you play perfect pitch washers?
2:022:44Washers Game Rules - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's both players to get a washer in the middle or in the box they cancel each other out just likeMoreIt's both players to get a washer in the middle or in the box they cancel each other out just like in a regular game of horseshoes.
How to make a square with 2x4s?
Step 1. Cut the 2x4s and plywood to size and sand them smooth. For each box, position four 2x4s (two 16-inch lengths and two 13-inch lengths) on a level surface with the narrow edge down and equal-sized boards at opposite sides to create a square. To hold this together, a couple of clamps should work.
How long does it take to paint a woodshop?
Estimated time to complete: 2 hours, plus time for paint to dry. Woodshop safety: Always wear proper eye, hearing and breathing protection when working with power tools or hand tools, and always work on a stable surface.
How to cut a carpet into squares?
Cut the carpet into two 13x13-inch squares. Flip them over and draw lines from corner to corner to help you find the center. Position the PVC coupler in the center (about 4¼ inches from each carpet edge) and trace the outside and inside edges.
How many 2x4 pieces can be cut?
Take the materials list with you to the store. The eight 2x4 pieces can be cut from two 6-foot boards. If you don’t have a saw back at the cabin, ask the staff at the store if they are able to cut them to size for you. The same goes for the plywood squares.
Step 1: Materials
We need the following: 4 - 16 inch 2x4 4 - 13 inch 2x4 8 - 1/2 inch washers, or any size washers that suit you 2 - 3 inch PVC couplings 2 16 inch squares of plywood. I used 3/8 inch.
Step 2: Wood
I got construction grade 2x4 that was 10 feet long. I would recommend if you have a bit more money to upgrade to higher grade wood, thats less likely to have splits and what not.
Step 3: Make the Box
I first pre-drilled all my holes, not all the way through, but a little bit. Makes the screw go straighter and its nice. I used wood screws to hold the pieces together. I also used a pipe clamp to hold the wood in place while I screwed it together. It is really easy to make the frame for the box. You need to make 2 of the boxes.
Step 4: Washers and PVC
If you want to color your washers, take 4, and spray paint them one color, and then spray paint another 4 a different color. you don't need to color them, but it makes it nice. IF YOU WANT TO PAINT THE BOXES, do that before you put the PVC in, because it will be much much much easier. Also, sand sand sand sand the entire thing.
Step 5: Other Ideas
You can add some sort of handle mechanism or even latches to keep everything secure for travel. I added handles made from some spare rope I found in the garage.
How many washers can you play in a game?
You can play with four was hers or two. Scoring can be done based on where the washer lands or based on the washer actually making it into the box or cup. The way we were taught to play is as follows: Each team gets 2 washers to toss. One member from each team takes turns tossing the washers.
How many points do you need to win in a washer game?
If a player lands the washer on the edge of the box and the opponent does not knock it off in their turn, the game is over. You must score exactly 21 points in order to win. You cannot go over.
How many points is a washer in a cup?
A washer in the cup is worth 5 points. A washer within 12″ of the front or side of the box is worth 1 point. If a player scores points and the opposing team scores the same points, the score is a wash at 0 points.