Thickness of Plywood The thickness of your plywood subfloor depends on the joist spans. The National Wood Flooring Association recommends a minimum plywood panel thickness of 7/8-inch for joist spans of 19.2 to 24 inches, and a minimum plywood panel thickness of 5/8-inch for joist spans of 16 inches or less.
What thickness of plywood is used for flooring?
Thickness of Plywood The thickness of your plywood subfloor depends on the joist spans. The National Wood Flooring Association recommends a minimum plywood panel thickness of 7/8-inch for joist spans of 19.2 to 24 inches, and a minimum plywood panel thickness of 5/8-inch for joist spans of 16 inches or less.
How thick should a subfloor be for a bathroom floor?
08/02/2022 · The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch.
How thick should OSB board be for subfloor?
01/07/2020 · the subfloors need to be thicker. For joist spacing of more than 16 inches up to 19.2 inches on center, the minimum thickness for both plywood and OSB is 3/4 inch. For joists spaced more than 19.2 inches on center, the minimum thickness for plywood is 7/8 inch and for OSB, 1 inch.
Can you use plywood as a subfloor?
The plywood subflooring thickness should be around 1/2 inches and 5/ 8 inches. If the hardwood is thicker, it is easier to nail on the joist. Tongue and groove plywood easily fits 8 inches in the floor and helps to avoid frictional sound between the plywood.
What thickness plywood should I use for flooring?
Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart. However, check with your local code authorities for the official recommendations.14-Sept-2021
What kind of plywood do you use for subfloor?
Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.04-Jan-2021
How many layers of plywood do you need for a subfloor?
Just 1 layer of 3/4 “ or 5/8” will do for most applications. If your finished floor is going to be heavy ceramic tiles, natural stone, and alike it may need to be thicker and or have more supports. Codes vary. In the US, ¾” is common, but that's still one layer.
Is it better to use OSB or plywood for subfloor?
The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn't have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.03-Oct-2013
Do you need tongue-and-groove for subfloor?
For subflooring, you use tongue and groove plywood. The tongue and groove are only along the 8 foot edges. On the four foot edges, your seams will fall on joist tops, so no need for tongue and groove.13-Oct-2011
Do I need 2 layers of subfloor?
That's the usual approach. Almost no one puts down double-thick subfloor in residential applications (for cost and handling reasons), and both layers need to be fastened to joists. Only thin underlayment can be fastened just to the subfloor.11-Mar-2021
What goes over subfloor?
Underlayment: Some types of flooring can be installed directly on top of the subfloor, such as vinyl flooring. Other types need a middle layer, called underlayment, such as laminate,carpet and tile.25-Jun-2018
Should I screw or nail subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.06-Sept-2021