Full Answer
How wide is a jon boat?
Jon boats sold commercially vary in width related to their length. 8-foot jon boats average 32 inches; 10-12 foot boats average 34-40 inches; 14-16 foot boats average 42-50 inches, and 18+ foot jon boats can be up to 60 inches wide.
What is the thickness of an aluminum boat hull?
Aluminum and walleye fishing boats in the 16- to 20-foot range might have .090- to .125-inch “sheet” aluminum hulls, the same thickness range and aluminum grade — 5052 — as most aluminum fuel tanks.
Do all Jon boats come with bare hulls?
Most of the jon boats 18+ feet size are factory prefabricated with installed features. They usually don’t come with bare hulls. If you needed bare hulled large boats, you’d likely need to have them fabricated.
How thick is the G3 16 DK aluminum boat hull?
The hull has .100” thick aluminum, the 16 DK can haul up to three people, it weighs in at 525 pounds, and can take up to 50 horses on the transom. Those who enjoy pursuing both angling and duck hunting will check out the G3 16 DK. Photo by G3 Boats. View G3 16 DK aluminum boats for sale on BoatTrader. Visit G3 Boats for more information.
How thick is the hull on a aluminum boat?
Hull thicknesses on aluminum boats can vary from 1/4 inch (. 250) to 1/8 inch (. 125).
What gauge aluminum is a boat?
125-inch “sheet” aluminum hulls, the same thickness range and aluminum grade — 5052 — as most aluminum fuel tanks. The plate aluminum boats we're focusing on in the 20- to- 40-foot range might have hull plating from 3/16 to 1/4 inch thick — about twice as thick as the smaller boats just mentioned.
How thick is the aluminum on a Alumacraft boat?
Competing aluminum boats typically have a bottom thickness of no more than . 125", even on the largest models. An Alumacraft 2XB bottom is up to 60 percent thicker than those competing models.
What metal are Jon Boats made of?
aluminumMost jon boats are made of aluminum, though there are also a handful of fiberglass and roto-molded polyethylene models on the market. Jon boats are very simple and utilitarian, often with little more than bench seats built-in. Jon boats tend to be small and light.
What type of aluminum is used for jon boats?
A Guide To Marine Grade AluminumAluminum Grade-TemperYield strength (psi)Workability5052-H3228,000Fair5083-H321 (Interchangeable With: H111 & H116)33,000Good5086-H3230,000Excellent6061-T640,000Good2 more rows
What kind of aluminum do you use to build a boat?
Aluminium Alloys Used in the Marine Industry Most common are 5083 & 5383. Aluminium-magnesium-silicon alloys - 6000 series, used primarily for extruded sections. Most common are 6082, 6061, 6005A & 6060.
What gauge aluminum does Alumacraft use?
5052 marine-grade aluminumAll Alumacraft boats, whether it's the all-welded jons or one of the riveted tournament models, are made with heavy-gauge, top-quality, 5052 marine-grade aluminum. That's why you see Alumacraft boats that have been on the water for years and years.
What is the life expectancy of an aluminum boat?
Conservatively that boat has at least 10,000 hours on the hull (the equivalent of about 5 years of full-time use). It runs like a top. Unless you purposely bash your aluminum boat around, it will outlast you and likely your kids.
Are Alumacraft Jon boats welded or riveted?
For instance, Alumacraft's Jon boats are welded, and most of their tournament boats are riveted. Both methods are durable options when they are properly done. One advantage Alumacraft currently has is that most of their hulls are one piece, so there is no seam in the center (the ribs are still riveted).
What grade of aluminium is marine grade?
There are several different grades of aluminum that are suitable for marine conditions. Marine grade aluminum, for the most part, is limited to the 5XXX and 6XXX grades. Grade 5052 is an excellent marine grade for when formability is required. If strength is more of a concern, grade 5083 is a good alternative.
What is the difference between marine grade aluminum and regular aluminum?
When alloyed with other metals like magnesium, aluminum develops an even higher level of corrosion resistance that can tolerate constant contact with water and saltwater. These specially treated aluminum alloys are known as marine-grade aluminum.
Why do they call it jon boat?
Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself. And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.
RECREATIONAL & LIVEWELL SERIES
As with any Xpress Boat, we take the time to build your boat the way you would want us to, just like we have for over 50 years.
Pre-Sales Questions?
We are happy to answer any questions you may have about any of our models or products.
How to measure a Jon boat?
To find the length, you measure from the center of the transom (rear of the boat) to the bow or front tip of the jon boat. To determine the width of a jon boat, measurements are taken on the beam width in the middle part of the boat.
What is a Jon boat?
For so many boating hobbyists, jon boats are the perfect solution to duck hunting expeditions, fishing trips, river explorations, and light transportation. They are very versatile and quite affordable, which appeals to a lot of people.
How are carrying capacity requirements related to a Jon boat?
In general, the bigger the boat, the more weight it can handle. A bigger boat can displace more water. As long as it is lighter than the weight of the water being displaced, it will float. With jon boats, the longer the boat and the more water displaced, the greater the load the boat can safely carry (more about boat lengths and weight capacities later).
How many people can you bring on a 14 foot boat?
The main difference between the 12-foot jon boat and the 14-foot jon boat is that with the 14-foot model, the load moves up to 3 people. 14 footers can accommodate most water sports like water skiing and wakeboarding.
Do Jon boats come with hulls?
Most of the jon boats 18+ feet size are factory prefabricated with installed features. They usually don’t come with bare hulls. If you needed bare hulled large boats, you’d likely need to have them fabricated.
Is it safe to carry a heavy boat?
Not only is it unwise, but it is also extremely unsafe. A small boat carrying a heavy motor will be inherently unsafe and unstable. In a worst-case scenario, your boat tips over or sinks with that heavy motor going under first. The only obvious exception to this phenomenon is racing boats.
Is it safe to drive a Jon boat?
While some people like to test these limits (wishful thinking at its best) by installing heavier motors, it just doesn’t work. Not only is it unwise, but it is also extremely unsafe.
How much does a Jon boat weigh?
Average Jon Boat Weight (With 33 Examples) In short, most Jon Boats are going to weigh between 400-500 pounds (180-225 kg) which includes both the aluminum hull as well as the engine. Some will weigh as little as 130 pounds (59kg) in total for the 10 foot lengths, while 20 foot boats will weigh upwards of 1,200 pounds (544kg) or more.
How much does a 275 pound hull weigh?
Average weight of 275 pounds (125kg) which is based on an average hull weight of 160 pounds (73kg) and average 15hp engine weight of 115 pounds (52kg).
How much fuel does a 30 HP engine use?
For example, a 30hp engine ran for 3 hours would consume around 45 pounds of fuel (30hp * .5 pounds per hour * 3 hours).
How much does a 50 HP engine weigh?
Average weight of 880 pounds (400kg) which is based on an average hull weight of 590 pounds (268kg) and average 50hp engine weight of 290 pounds (132kg). 3 hours of fuel consumption using the formula above (.5 pounds per horsepower per hour) will burn around 75 pounds of fuel.
How much does a scuba diver weigh?
Average weight of 170 pounds (77kg) which is based on an average hull weight of 110 pounds (50kg) and average 6hp engine weight of 60 pounds (27kg).
Can a small SUV tow a Jon boat?
This means just about any small or mid-sized SUV is going to be able to tow your average Jon Boat without any problem at all. If you are doing the math on your specific car, be sure to include not only the total weight of the boat and trailer, but also any passengers and luggage/gear that you have in the car itself.
