how thick are closet rods

by Joaquin Goyette Published 3 years ago Updated 2 years ago

Chrome rods have a 0.08” wall thickness - the industry leading thickness
Brass and white rods have a 0.06” wall thickness
Brushed stainless rods have a 0.05” wall thickness

Closet Rod Dowel Diameter

A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength.

Full Answer

What is the standard diameter of a closet rod?

Most closet rods are 1 1/4 inches wide. This standard diameter gives the rod stability and prevents bending under heavy loads. A wood rod of this diameter is typically supported by a bracket every 34 inches. Angle brackets that mount to the back wall extend forward to support a closet rod that is 1 1/4 inches wide.

What is the standard height for a closet rod?

Standard rod height for a single closet rod is 60 inches, a height that leaves ample hanging space for floor-length dresses. When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods. See further detail related to it here.

What is the proper height for closet rods?

What is the average walk-in closet size?

Typical width and depth. Changing rooms must be at least 4 meters wide and 4 meters deep.
The front door is divided. The walk-in closet should be large enough to allow 24 inches of space between shelves, shelving, and other obstacles. Remember that the pendant
Store and hang.
ADA Requirements.

How to make your own closet rod?

Things You'll Need

Pull-down closet rod kit
Clothing
Hanger
Drill
Tape measure
String
String level
Nail
Hammer
Screwdriver

What are standard size closet rods?

What type of closet rod is the strongest?

Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient. Even after being overloaded they are likely to spring back to their original shape due to the resilient quality of steel.

Is a wood or metal closet rod better?

All closet rods for custom closet organizers are made of sturdy metal rather than wood or wire that is coated in various finishes. The higher quality metal rods hold a lot of weight and won't sag.

What can I use for a closet rod?

With all the closet organizers available today, a plain wood rod is sometimes still the best choice, especially for a small closet. Most hardware stores carry simple metal flanges made to hold up closet rods. Installation is a matter of properly hanging the flanges and, if desired, painting or staining the rod.

How much weight can a closet rod hold?

6 FOOT ROD WEIGHT CAPACITIES: Aluminum Anodized Oval: Up to 45 lbs. Steel Polished Chrome Oval: Up to 50lbs. Aluminum Anodized Round 1-1/16”: Up to 55 lbs. Aluminum Anodized Signature”: Up to 65 lbs.

How can I make my closet rod stronger?

0:121:45How to Reinforce Closet Rods - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is good hat right in the middle. So now when I hang clothes up and everything it's supported byMoreThis is good hat right in the middle. So now when I hang clothes up and everything it's supported by this. It's not going to sag anymore. The same thing with the front.

How often do you need a support for a closet rod?

You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

Do closet rods need to go into studs?

Drywall is thin and cannot hold the weight of a loaded closet rod on its own. The key to proper closet rod installation is using wall studs when possible to support your brackets. This ensures that the load of the closet rod isn't on the drywall but is instead on solid wood.

How long should closet rods be?

Can you use a curtain rod as a closet rod?

This drapery rod turned closet rod is such a great solution for those “unusable” closet walls or really for any place you need clothing storage but are short on space. Have you ever thought to use to a drapery rod for something other than hanging curtains? I've also used them to organize ties and hats.

How do you make a closet rod?

2:012:59Double Your Closet Space - Double Closet Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipBehind the drywall here and slide this Center bracket up till it just touches the wood and I'll makeMoreBehind the drywall here and slide this Center bracket up till it just touches the wood and I'll make two marks here. And then we'll screw in our support I put the wood on both sides.

How deep is a closet shelf?

Closet shelves come in standard depths of 12", 14", or 16". You can go deeper with a custom depth shelf for linen or storage closets not intended for clothing depending on what you plan to put on them and whether you want to include closet accessories.

Rods & Shelves Height Tips

There’s a lot of debate about the perfect height for rods and shelves in your home. There are many different opinions on this topic, with no one being right or wrong.

Rods & Shelves Spacing Tips

If your rods and shelves are too close together, the clothes will be squeezed and won’t have room to breathe. And so, getting the spacing right is very vital. You might want to try these spacing tips to get to that optimal spacing dimension.

Rods & Shelves Design Tips

Do you ever have trouble deciding on the best rod and shelf combinations for your home? Are you not sure what to look for when picking out a new design? No need to worry; we’re here to help.

Frequently Asked Questions On Closets And Rods Answered

A good rule of thumb is to measure the distance from your rod down to where you would like it positioned under a shelf.

Final Thoughts

We all want to have that dream closet! But, before anyone gets started on designing their new space, there are a few things you’ll need.

For a single-rod system, mount the rod 66 inches above the floor

This closet rod height enables long coats, skirts, pants, dresses, and suits to hang mid-air without folding or brushing against the closet floor. Ultimately, your garments will remain clean, wrinkle-free, and in less frequent need of ironing.

Adjust the standard closet rod height if installing a double-rod closet system

For the average person whose wardrobe contains few lengthy garments, single-rod systems leave lots of unused square footage in the closet. Double-rod systems put this extra space to use with an additional rod mounted a few feet below the top rod.

Leave wiggle room between closet rods and shelves

Say a shelf built into your closet obstructs the optimal rod placement position. If this is the case, mount the closet rod below the shelf, achieving a distance of at least two inches from the bottom of the shelf to the top of the rod. Without this clearance, the space between the shelf and rod will be too tight to maneuver hangers.

Opt for a closet rod depth of at least 12 inches

Closet rod height isn’t the only aspect to consider for perfect placement. You also need to adhere to a precise closet rod depth, which is how far the rod is situated from the rear wall of the closet. If you don’t leave sufficient space between the rod and the rear wall, one side of all garments will wrinkle from being bunched up against it.

Mark the closet rod measurements before mounting to ensure perfect placement

First, position your tape measure horizontally, and measure 12 inches from the rear wall. This marks the ideal depth of the closet rod. Next, you’ll want measure 66 inches from the ground upward, which marks the ideal closet rod height.

Use the bottom of the rod as a guide when measuring height

Plan to align the bottom of the closet rod with the 66-inch marking when mounting the rod—this means there should be a full 66 inches between the rod and the floor once you’ve installed it.

Drill walls and mount hardware

When you’ve found and marked the optimal closet rod height, drill holes into the marked locations on the sidewalls (first ensuring the walls have studs in order to best support the full weight of your wardrobe). Then insert a heavy-duty wall anchor or other mounting hardware into each of the holes, and secure your rod holder to the anchors.

What is the thickness of brass tubing?

Use it for lighting, curtain rods, closet rods, shower curtain rods, rods for wall hanging, and many other uses. The wall thickness is 0.040 inches. For 6 feet or larger spans it is recommended to insert a wooden dowel inside the tube to make it sturdy, and/or also use a center bracket. This product is also available in thickness of 0.062 and 0.125 inches. See related products.

What is a square hammer curtain rod?

The Square Hammered curtain rod is a simple and timeless style statement, with a variety of iron finishes, that will appeal to many. The drapery rod is constructed from iron which is highly durable and resilient.

What is a round iron curtain rod?

The Round iron curtain rod is a simple and timeless style statement, with a variety of iron finishes, that will appeal to many.

How wide should closet rods be?

The higher quality metal rods hold a lot of weight and won't sag. But they should be installed in sections no more than 48-inches wide unless additional closet rod supports are included.

What are closet rods?

The Ins & Outs of Closet Rods. Closet Rods are essential to any closet design. After all, you can't really hang your clothes without one. It seems like it should be simple, but why so many choices? Over the years closet rods have evolved to provide more decorative finishes and shapes.

What is a pull down rod?

Pull-down rods are useful when you want to mount the closet rod high overhead in an out-of-reach location. This might mean you have high ceilings and want to make maximum use of the space, or it may be that you are on the shorter side and the upper rod is simply not convenient for you. The pull-down rod is much easier to use than a shepherd's hook for everyday use. Pull-down rods can have either manual or motorized operation. The manual version includes a handle. It lowers the whole rod to eye level with a gentle tug, but there are strict weight restrictions for this type of rod. Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod. However, it is more expensive than the manual pull-down rod.

What is a round closet rod?

Round closet rods give a nod to the classic shape of the old wood closet rods but are lighter in weight without losing any of the strength of the older rods. They come in a wide selection of colors and even have features like plastic cover caps to prevent scratching by wire hangers from the dry cleaners.

How do closet rods work?

Closet rods with LED lighting installed above the rod to illuminate the clothing hung from the rods. The most dramatic effect is achieved when strip lighting is installed under a shelf that sits directly over the rod rather than inside or along the bottom of the rod itself.

What kind of rods do closets use?

There are so many more options for today's consumer than the old wood or white wire rods of years past. All modern custom closet systems use metal rod s that come in a whole range of styles, colors and finishes — just like those seen in plumbing fixtures. Consider all your options before designing your next closet.

What is the best rod for a closet?

The Oval Rod is the standard choice when it comes to custom closets. It offers the simplest of the custom closet rod designs and considered a very good "Entry Level" option. The polished chrome oval rod is the most economical choice of all custom closet rods.

How wide is a closet?

As for closet width, the standard is around 6 feet. However, you can also adjust this and expand the width with bifold doors which are available in a number of different widths.

How high should a closet door be?

Most closet height standards for doors are about 80 inches. This equals the height of a standard entry door, so this height will ensure that the door to your bedroom, for example, is even with the closet you have across the room.

How high should a shelf be off the floor?

This puts the recommended shelf height between 84 inches to 87 inches off of the floor.

How deep is a walk in closet?

Reach-in closets have a width of about 48 inches long to 72 inches long. The inside of the closet usually sits around a depth of 24 inches to 30 inches deep.

Do you need a higher rod for long dresses?

There are some factors that may change this measurement. For example, if you own a lot of long dresses, you might need a higher rod than if you were storing mostly t-shirts and dress shirts. Another factor that will shift this height is if you choose to use a double-rod system in your closet.