Board and batten
Batten
A batten is most commonly a strip of solid material, historically wood but can also be of plastic, metal, or fiberglass. Battens are variously used in construction, sailing, and other fields. In the lighting industry, battens refer to linear light fittings.
How tall should board and batten be?
Let me summarize a few of the decisions we had to make before we could get started:
- How high should the board and batten go? I’ve seen people go all different ways with this. ...
- How wide should all the boards be? Again, huge variations abound! ...
- What about the spacing between the vertical boards? ...
- What kind of material should you use? ...
- What kind of paint to use? ...
- When should you paint, anyway? ...
How to install a DIY board and batten wall?
- While holding the horizontal board in place, use a nail gun to attach it to the wall.
- Place a nail every 10 inches or so on the top and bottom of the board to ensure it is fixed to the wall properly while the glue has time ...
- Repeat the steps with the vertical trim batten boards. ...
What to know about Hardie board and batten siding installation?
17 Simple How To Install Hardie Board And Batten Siding Ideas Photo
- Hardie Board Siding
- James Hardie Board Batten Siding Colorplus Arctic
- Hardiplank Board Batten Siding Bing
- Grey Slate Hardie Shingle Board Batten Siding Creve
- Board Batten Siding Hardiplank
- Hardie Siding Board Batten Hardy
- Hardiplank Board Batten Siding Flickr Sharing
- Exterior Remodel Pelham Manor
- Board Batten Austin Pro Siding Windows
How to do board Batten?
STEPS | Board & Batten Siding
- Order Siding Materials and Supplies, and Organize the Necessary. ...
- Prefinish Siding Boards and Battens (optional but recommended). ...
- Remove Old Siding. ...
- Flash Weather Resistant Barrier to Windows (if replacing WRB). ...
- Plan Siding Install. ...
- Plan Fastener Spacing and Location For Siding. ...
How tall should board and batten be?
What type of wood is used for exterior siding?
How tall should board and batten wainscoting be?
What is the proper height for wainscoting? Generally, the cap sits about one-third the way up the wall. So if the ceiling is 9 feet, go for 3-foot wainscoting. For taller wainscoting, such as one with a plate rail, cap it two-thirds the way up the wall.
Does board and batten make a room look taller?
Use things like board and batten to make a small entryway or bathroom look larger. We had a very small entryway with a dropped ceiling in our last house, but when we installed extra tall board and batten, it made the space feel WAY bigger, and more open!Oct 20, 2016
How much space should be between batten and board?
Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that's just a personal preference. Our wall is 164” wide, so we used 8 batten (for a total of 7 spaces) with a distance of 19.42 inches between each batten.Mar 11, 2019
Is board and batten outdated?
Today, board and batten has been largely removed from it's practical origins. Exterior board and batten still exists, but the most popular use of this design is interior. Entire walls or ceilings can be covered in board and batten, or it can be used as wainscoting.
How high should my board and batten be? | Hometalk
I’m putting board and batten in my entry hall. It’s a small space and directly left of the entry door is a small landing for the stairway. This makes the ceiling lower on the landing. Do I stay consistent with the height of my board and batten (42 inches up from the floor) which will make the board and batten go pretty high up the landing wall and staircase wall, or do I keep the landing ...
How to Calculate Board &Batten — Ashley French
I am going to share the easy tool I use to calculate the perfect spacing between boards when installing board and batten or wainscoting. A question I get asked often on my Instagram and TikTok accounts is how I calculate the spacing of the boards when I am installing board and batten. I have discovered an easy-to-use calculator online that does all the math for me.
Board and batten height | Hometalk
Are there "rules" on how high you should make a board and batten wall feature or is it just personal preference? I have a couple of rooms I'd like to do this in and could go different heights but don't want it to look odd if too low/high.
How tall should board and batten walls be? - AskingLot.com
Click to see full answer. Also asked, how far up the wall should wainscoting go? The traditional rule of thumb is that wainscoting height should be a third of the wall's height, including the cap or any moldings. So if you have 9-foot walls, then 3-foot (or 36-inch) wainscoting will look great. Scale down to about 32 inches for rooms with 8-foot walls.
How wide should battens be on siding?
While the width of the battens is your choice, they should be wide enough to overlap the edges of the larger boards by at least ½ inch on both sides. Caulk, then paint or seal the siding.
How much does it cost to install board and batten siding?
Both cedar and redwood are comparable in price, running $500 to $650 per square when using 1×12 boards for the wide planks and 1×2 boards for the narrower battens. The cost to install Cyprus, locust, white oak or hemlock runs about $250 to $400 per square. Add another $15 to $50 per square (for any type of wood) to seal, stain, or paint the siding after it’s installed, and for the screws, caulking, and furring strips required for installation (see below).
What type of siding was used in the 1800s?
The large flat boards had a tendency to warp, however, and by the late 1800s, horizontal lapped siding (narrow horizontal boards installed from the bottom up, with each subsequent board lapping the one below) proved more efficient at shedding rain and so became the norm.
What is board and batten siding?
Wood siding that consists of narrow vertical strips (battens) installed over a flat base (board) is known, logically enough, as board and batten. It’s been popular for centuries on the exterior of houses as well as storage sheds, barns, and other agricultural outbuildings; it’s since become on trend as a trim to add visual interest ...
Why did boards and battens move in?
Board and batten moved inside in the late 1800s as a way to prevent the dents and dings on the lower portion of plaster walls, caused by scooted chairs and other everyday bumps. Around the mid-1900s, board and batten became a desirable “look,” particularly in bungalows, Arts and Crafts, and Country style homes. Advertisement.
Is board and batten siding kiln dried?
Today, board and batten siding is kiln-dried to reduce warping, and it’s installed over framing, sheathing, and a vapor barrier to lend greater structural integrity. That said, any type of wood used outdoors should be resistant to moisture and insect damage. Cedar is a common choice for exterior board and batten siding, ...
Can you use a nail gun to install board and batten?
If you have basic carpentry skills, including the ability to measure and cut the boards precisely, and you’re comfortable using a circular saw, a caulking gun, and a nail gun or screw gun, you can install either type of board and batten— the exterior siding or the interior trim.
How to measure for a wall?
Measure Everything 3 Times! I know the old engineering adage is “Measure twice, cut once.” But when it comes to figuring out wall measurements, sometimes you’ll get lost in how many widths across do you need, versus estimated lengths of the rails. Take a few minutes to roughly draw a box (your room) and write down your wall width. Don’t forget to double the widths since you’ll need a top and bottom molding. Then, figure out your estimated height. Decide how many rails you’ll want and multiply it by the rail length dimension.
How many coats of paint did Jordan use to paint his walls?
Once Jordan had the walls painted, he painted 3 coats of the bright white on his wood rails.
How to make sure there is as much room as possible?
To make sure that there is as much as room possible, remove any doors from hinges. If you are in especially tight spaces, consider getting creative and remove furniture. For the powder room, Jordan removed the toilet tank and he said it made working in the space even easier. Caulk will fill in these spots!
Board and Batten Wall
What better way to define a space and make an impact on a wall than with wainscoting. In this article I’ll show you how I installed an inexpensive board and batten style wainscoting out of 1/2″ MDF and 1/4″ masonite to help define our dining area.
Questions? Comments?
As always, if you have any questions don’t hesitate to comment below and especially don’t forget to post pictures of your finished products in the comments! ENJOY!
How high should beadboard be above tub?
If acting as a backsplash for a freestanding tub, too, it might rise to 8 inches above the tub’s lip. In kitchens, beadboard is often carried up to the bottom of the upper kitchen cabinets, which is 54 inches from the ground.
How high should wainscoting be in a room?
In a room with a lofted ceiling and 15-foot walls, the rule of thirds would have wainscoting height at 5 feet. However, extending wainscoting this high could potentially take emphasis away from the grand size of the room.
How tall should wainscoting be?
The traditional rule of thumb is that wainscoting height should be a third of the wall’s height, including the cap or any moldings. So if you have 9-foot walls, then 3-foot (or 36-inch) wainscoting will look great. Scale down to about 32 inches for rooms with 8-foot walls.
How high should a bathroom vanity be above the countertop?
In that case, homeowners might choose to extend wainscoting 40 inches from the floor—that’s 4 inches (approximately the height of a standard bathroom vanity’s backsplash) above a countertop —or until it reaches the bottom of a medicine cabinet. If acting as a backsplash for a freestanding tub, too, it might rise to 8 inches above the tub’s lip.
What is beadboard wainscoting?
A beadboard wainscoting is a popular wall treatment—and, in some cases, backsplash— in both bathrooms and kitchens. Their particular fixtures will force homeowners to take a different approach than the one-third rule.
What is wainscoting on a wall?
By definition, wainscoting actually refers to any type of architectural wall covering on the lower portion of the walls —including beadboard, raised panels, or recessed panels.
Is there a rule of thumb for wainscoting?
Is there a good rule of thumb? A: Yes, there is a general rule for how high up the wall to run your wainscoting—but you know what they say. Rules are made to be broken. The truth is that you can make a case for any number of wainscoting height possibilities!
How tall should board and batten be?
Similarly, how tall should board and batten walls be? This wall is about 4-1/2 feet tall and is used as a feature wall in the dining room. Rip a 3/4″ thick piece of wood or MDF down to the same width as your baseboard. Then, glue and nail it in place.
What type of wood is used for exterior siding?
Cedar is a common choice for exterior board and batten siding, but other acceptable wood species include Cyprus, redwood, locust, white oak, and hemlock.
