How much WonderBoard do I need?
WonderBoard Lite 5 ft. x 3 ft. x 1/4 in. ... | HardieBacker 3 ft. x 5 ft. x 1/4 in. Cem ... |
$8.97 | $8.98 Was $9.84 Save 9% |
(150) | (602) |
Details Above | View Details |
Full Answer
How to install Wonderboard?
How to Install WonderBoard 1 Tips for Working With WonderBoard. The materials in WonderBoard include Portland cement and strands of fiberglass reinforcement. ... 2 Instructions for Cement Board Installation. WonderBoard comes in three-by-six sheets. ... 3 Keep These Things in Mind. The edges of the WonderBoard must overlap a framing member. ...
What is Wonderboard made of?
WonderBoard is a concrete backerboard made by Custom Building Products. The company also produces WonderBoard Lite, which it says is 20 percent lighter in weight.
What size nails do you use for Wonderboard?
Because flooring is subject to heavy foot traffic, fasten WonderBoard with either 1 1/4-inch cement backerboard screws, or 1 1/2-inch galvanized roofing nails. Space the nails or screws about 6 to 8 inches apart.
What goes on top of Wonderboard?
The WonderBoard goes on top of this barrier. The recommended procedure for installing fiber cement board such as WonderBoard on the floor calls for first spreading a layer or mortar. This stabilizes the backer board, levels it and prevents cracks in the tiles or tile grout.
How many sheets of cement board do I need?
Here's what to do: Calculate how much backer board you will need by measuring the length and width of the area you will be tiling. Multiply these two numbers to calculate the area's square footage (square meterage). Each sheet of backer board covers 15 square feet, as each one is 3-by-5 feet.
Does it matter which side of Wonderboard is out?
Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.
Do you put mortar under Wonderboard?
2:044:17How to Install WonderBoard Lite Backerboard for Tile - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace screws within two inches of the edge around perimeters fill gaps between panels with thin setMorePlace screws within two inches of the edge around perimeters fill gaps between panels with thin set mortar embed fiberglass mesh tape and smooth the surface.
Do you have to tape Wonderboard seams?
For tile backer boards such as Durock, Wonderboard, Hardiebacker, Permabase, and others the seams between the board need to be treated with 2-inch alkali-resistant mesh tape.
How do you cut WonderBoard cement board?
0:191:42Cutting Cement Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are different ways to cut cement backer board you can use a circular saw with an abrasive orMoreThere are different ways to cut cement backer board you can use a circular saw with an abrasive or diamond blade but that makes too much dust.
Can you use 1/4 inch cement board on floors?
1/4" USG Durock® cement board is an ideal substrate for floor and countertop ceramic tile installations. The 1/4" thickness helps eliminate transition trim when abutting carpet or wood flooring and minimize level variations with other finish materials.
Can I just screw down cement board?
Doing this will require that you remove the existing surface material before installing backer board over the studs. Cement board can also be used on countertops when laying tile. However, the process will involve using an extra sheet of backer board. Never use standard screws when installing cement board.
What kind of screws do you use with WonderBoard?
around all edges using 1-1/4" cement backerboard screws or 1-1/2" galvanized roofing nails. Around perimeter of each board, position fasteners within 1/2"-2" of edges.
Do I really need Thinset under backer board?
Thinset is going to create a solid surface under tile and prevent flexing that could lead to cracking. Using thinset between the backerboard and subfloor will create additional strength, fill in any potential gaps that exist and lessen the possibility of movement.
Can I use drywall mesh tape for cement board?
Although paper tape generally leads to a cleaner finish on drywall, you can still achieve a smooth look if you use mesh tape on a drywall/cement board joint. Use this self-adhesive joint tape where cement board and drywall meet. Never use paper drywall tape on cement board.
Can I use drywall mud on cement board?
When using drywall compound over cement board, it is recommended, but not required, to use a faster setting-type joint compound (45 or 90 min), than typical joint compound. Make sure to follow manufacturer guidelines for the products used to finish the non-tiled area.
Do I need to seal cement board before tiling?
Although most backerboards currently available won't fall apart when exposed to moisture and are somewhat water-resistant, they aren't waterproof. To prevent moisture from seeping through to the wood or metal studs beneath the tile, a barrier or sealant must be used on porous materials.
Which One You Should Choose?
Now based on our information and different aspects, it’s all up to you to make your decision.
Recent Posts
link to Sterling Toilet Problems And How To Troubleshoot Those Issues?
What is a Backer Board?
Backer board also goes by the name of cement board. It is a type of sheeting material that should be installed underneath all tiles in interior property construction that may come into contact with water.
Hardibacker Boards
Hardibacker boards are one of the most popular types of backer boards. They are made from a mixture of Portland cement and cellulose fibers, which give it a much lighter weight compared with traditional cement board that is made purely from cement.
Wonderboard
Wonderboard is another excellent choice of backer board, which is suitable for both indoor and outdoor applications.
Hardibacker and Wonderboard Compared
Hardibacker and Wonderboard are both solid choices of backer board for residential tile installation projects. However, depending on the type of project you are working on, along with your experience, there might be a specific board that will be better for you.
