What kind of oil does a Honda GX390 take?
Furthermore, what oil goes in a Honda gx390? To be specific about Honda's GX390 oil recommendations, they claim 10W-30 for general use. Straight 30 for temps over 10C (50f) And for LPG GX390's they specifically prohibit multi grade oils and simply require straight 30.
What is the compression ratio of a Honda GX390?
The cylinder bore is 88.0 mm (3.5 in) and the piston stroke is 64.0 mm (2.5 in). Compression ratio rating is 8.2:1. The Honda GX390 produces 11.7 HP (8.0 kW) of maximum horsepower at 3,600 rpm and 9.4 HP (7.0 kW) of continuous rated power.
What is the difference between the old and New GX390 engines?
The dimensions and outward appearance, however, remained virtually unchanged, in order to guarantee 100% interchangeability with the older GX390-engines. For the same reason, the naming of the engine remained unchanged, but all new engines have a number “2” in model version (T2 or UT2), old versions have a number “1” (GX390 K1).
What kind of engine does a Honda GX390 RT2 have?
The Honda Honda GX390 RT2/T2/UT2 is a 0.39 l (389 cc, 23.7 cu·in) single-cylinder air-coolled 4-stroke internal combustion small gasoline engine with horizontal shaft, manufactured by Honda Motor for general-purpose applications. From spring 2010 onwards, Honda producing the updated version of GX390 engines with larger displacement.
What oil does a Honda GX390 use?
5W30Honda 5W30 Engine Oil (2 Pack) - 08207-5W30.
Does the Honda GX390 have an oil filter?
K&N automotive oil filters for the Honda GX390 offer high oil flow rates while providing outstanding filtration. K&N automotive oil filters are designed to work with all grades of synthetic, conventional and blended motor oils.
How much oil does a Honda pressure washer take?
Oil capacity-Dry engine holds 18.6 oz. and refill amount is 12 to 13.5 oz. It also says to use the upper mark on the dipstick. Now the pressure washer owners manual says to fill the upper level of the oil filler neck and with 18oz.
How much oil does a 13 horse Honda hold?
Oil capacity: 1.16 US qt (1.1 L) Fuel tank capacity: 6.4 U.S. qts (6.1 liters) Fuel: Unleaded 86 octane or higher.
How do you change the oil on a Honda GX390?
0:156:02Honda GX390 Pressure Washer Oil Change | Clean Pro ExteriorsYouTubeStart of suggested clipEnd of suggested clipBut what you want to do is I've already loosened this I have a bucket underneath. Here for the oilMoreBut what you want to do is I've already loosened this I have a bucket underneath. Here for the oil to drain into. And I got the pressure washer lifted off the ground a little bit.
What kind of oil does a Honda power washer take?
Honda 10W30 4-Cycle Engine Oil (1 Quart)
How much oil do I put in my pressure washer?
In general, most pressure washers use around 5 oz of pump oil. This means that a single bottle of pump oil is enough for an oil change. Most pumps use non-detergent oil, as the pump has no oil filter. Regularly check if the oil quality.
How many horsepower is a Honda gx390?
11.7 HPSpecificationsEngine TypeAir-cooled 4-stroke OHVBore x Stroke88 X 64 mmDisplacement389 cm3Net Power Output*11.7 HP (8.7 kW) @ 3,600 rpmNet Torque19.5 lb-ft (26.4 Nm) @ 2,500 rpm16 more rows
What happens if I put too much oil in my pressure washer?
Overfilling oil may cause smoking, hard starting, spark plug fouling, and oil saturation of the air filter. Do not run the pressure washer before connecting and turning on the water supply failing to do so will result in damage to the pump.
Is the Honda GX390 a good engine?
Powerful. With the GX340 and 390, you're looking at some of the best engines in the business. Powerful, Reliable, Durable, and Quiet. Honda's GX Series is power you can trust, and then some.
How many hours will a Honda GX390 last?
Honda GX390 uses . 92 gal/hr @3600 rpm with an approximate run time of 1.8 hrs.
What is Honda GX390 used for?
The GX390 engine is suitable for a wide range of heavy-duty applications such as construction equipment, tillers, generators, welders, pumps and other industrial applications.