Cost Estimator by Amount of Concrete
| CUBIC YARDS | AVERAGE COST | TYPICAL COST RANGE |
| 1 | $160 | $147 to $187 |
| 2 | $320 | $294 to $374 |
| 3 | $480 | $441 to $561 |
| 4 | $640 | $588 to $748 |
...
Type of concrete.
| PSI | AVERAGE COST * per cubic yard | AVERAGE COST * per cubic yard, plus short load fee |
|---|---|---|
| 4,500 | $128 to $138 | $171 to $181 |
| 5,000 | $135 to $150 | $178 to $193 |
What is the average price of a yard of concrete?
The area of each yard is 2.5 ‘guntha’ and each has been constructed at a cost of Rs 7 to 9 lakh. Spending crores of rupees, these 106 yards were constructed to lessen the worries of farmers.
How do you calculate cost per cubic yard of concrete?
To get the most out of your concrete project, follow these installation tips:
- Be precise in your measurements. ...
- Have the proper tools on hand. ...
- Build a proper form for your project. ...
- Use a level to make sure you have the correct grade on your slope and to allow water to drain away from buildings.
- If you need a stronger slab, reinforce the concrete with wire mesh or rebar.
How much cement do you need for a yard of concrete?
For estimating purposes, you can make about 1 cubic yard of concrete with 5 1/2 94-pound bags of cement, 17 cubic feet of sand, and 18 cubic feet of gravel.
What is the formula to calculate yards of concrete?
how much concrete do i need for a 10' x 10' slab?
- @ 4" thick you'll need 1.25 yards of concrete
- @ 5" thick you'll need 1.6 yards of concrete
- @ 6" thick you'll need 2 yards of concrete
How much does it cost to pour a 24x24 slab of concrete?
between $3,057 and $5,944A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
Is it cheaper to pour your own concrete?
Whether you're pouring concrete countertops or a patio out back, it may be cheaper to pour concrete yourself rather than hiring someone. Whether you'll save much in doing so depends largely on the amount of concrete needed and the amount of time you have to invest in your concrete project.Jul 19, 2021
How much does it cost to pour 25 yards of concrete?
Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost.Jul 1, 2019
How many yards of concrete do I need for a 24x24 x4 slab?
7.11 yardsFor example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
Do you need rebar for 4 inch slab?
The thickness of rebar should be no more than 1/8 that of the slab, so a 4” slab shouldn't have steel greater than #4 or 1/2″ bar. It's best to check with a Structural Engineer if your slab will bridge or cantilever.
How many 80lb bags of concrete make a yard?
45 bagOne 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
How many yards of concrete do I need for a 12x12 slab?
Regarding this, “how much concrete do I need for a 12×12 slab?”, at 4 inches thick, generally you will need approximately 1.76 cubic yards or 47.52 cubic feet or 1.35 m3 (either 104 bags of 60lb or 80 bags of 80lb) of premixed concrete for a 12×12 slab, at 5 inches thick slab, 2.22 cubic yards or 59.90 cubic feet or ...
How much does a 20x20 concrete patio cost?
How Much Does a 20x20 Paver Patio Cost? According to data from HomeGuide, a 20-foot by 20-foot paver patio runs from $1,900 to $6,800, including labor and materials such as clay brick, natural stone or concrete pavers. Obviously, the larger the patio, the more materials required and the greater the labor costs.May 29, 2021
How many sq ft does a yard of concrete cover?
How much concrete is in a yard? Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.
How many yards of concrete do I need for a 10x10 slab?
1.3 cubic yardsThe amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.Sep 25, 2020
How many square feet will a yard of concrete cover at 6-inches thick?
54 square feetOne Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.
How thick should a concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
READY MIXED CONCRETE PRICE LIST
CONCRETE: 5 sack or 3000 psi Concrete $ 142.50 per cubic yard 5.5 sack or 3500 psi Concrete $ 145.50 per cubic yard 6 sack or 4000 psi Concrete $ 148.50 per cubic yard Additional Cement $ 6.00 per sack of cement
What is more expensive, concrete or stone?
Outdoors, asphalt, plain concrete and gravel are more affordable, while natural stone and pavers are more expensive. Indoors, laminates and ceramic tiles will cost less, while granite, marble and hardwood will cost more. Decorative concrete is great if you can afford to spend some extra money but don’t want to break the bank.
What are the factors that determine the price of concrete?
Some of these factors include the following: grading, subbase preparation, concrete forms and finishing, reinforcement, and the local cost of concrete.
What is decorative concrete?
Decorative concrete is a good option for homeowners that want a high-end look without the high-end price tag. Concrete is a versatile material that can be used for floors, countertops, patios, driveways and more. Techniques such as stamping, staining and polishing, can transform concrete to look like flagstone, marble or other expensive materials at a fraction of the cost.
What materials are used for concrete?
The typical materials used are concrete mix, forming supplies, texturing and coloring products, sealers, etc. Labor will vary depending on your project - its size, whether you have new or existing concrete, how detailed the decorative work will be and more.
What factors affect the cost of concrete?
Factors that influence the cost of decorative concrete: 1 The number of colors used 2 The number of stamping textures used 3 The detail of the design (i.e. complicated patterns are expensive) 4 Special details such as embeds (common in countertops) 5 Specialty form or mold work (i.e. curves and unique shapes cost more) 6 Level of polishing
What is needed to repair cracks in concrete?
Reinforcement is required because all concrete cracks, so if you want your cracks to remain small, you'll need reinforcement. Wire mesh, re-bar, plastic mesh, and fiber in the mix are all commonly used materials.
Cost Estimator by Amount of Concrete
On average, homeowners pay $117 per cubic yard of concrete, with a typical cost range between $104 and $144 per cubic yard. But don’t start calculating your costs just yet –– there’s something you need to know about buying in bulk, and it’s called a short load fee .
Other Factors That Affect Cost
Most homeowners can expect to pay between $104 to $144 per cubic yard when buying a truckload (or more) of concrete. But how can you estimate where your concrete order will fall within that range? And if you live far away from the concrete mixing company or need delivery on the weekend, you might see an additional cost on your final bill.
Extra Services
Pouring concrete yourself might save on labor costs, but it doesn’t save you time and energy. Sometimes hiring a concrete contractor to install the concrete slab for you is the way to go.
Cost of Concrete Across the U.S
The costs listed in this pricing guide are all national averages. On a local scale, the cost of concrete might vary depending on supply and demand in your region.
DIY Concrete Installation
If you woke up to a morning to-do list taped to the fridge that reads “Pour a 10 x 20 concrete patio in the backyard,” you’ve got good reason to say, “Honey, I can’t.”
Conclusion
When you’re pouring a large slab of concrete, sometimes skipping the bags and buying in bulk can save you a lot of money. And don’t let calculating cubic yards scare you –– it’s easy to determine how many cubic yards you’re going to need as long as you know the dimensions of your concrete slab.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
How much does a cubic yard of concrete cost?
As you read earlier, a cubic yard of concrete costs an average of $113-$126 for a complete installation. This price point is the average for delivery, labor, and placement within the United States, but more than just concrete goes into the price of a cubic yard.
Can concrete be used for driveways?
If you want a building material that can be used for anything from pools to houses to driveways, concrete is what you’re looking for. No matter the project, concrete can fulfill your needs. However, it is smart to see how much your budget can handle before you start your endeavor.
How Much Is A Yard Of Concrete?
A yard of concrete doesn’t cost the same across the board. There are many things to take into consideration. The average cost for a yard of concrete is around $90 per cubic yard. This isn’t a linear yard.
Yard Of Concrete Cost Factors
The cost of the concrete depends on a lot of different things. For example, the intricacy of the concrete is a huge factor. Simply poured concrete is much cheaper than stamped and stained concrete will be.
Concrete Price Per Yard Labor Costs
The labor cost of concrete can be quite a hefty portion of the total cost. A good rule of thumb is to double the cost of the concrete itself and you have your total cost including labor. This isn’t a set amount, but a decent estimate.
How Much Is Concrete Per Yard Compared To Other Materials?
Concrete isn’t the cheapest material you can buy nor is it the most expensive. Since we are talking about pouring concrete, let’s use a 10×10 area that is 4-inches thick to compare the prices. So how much for concrete?
Choosing Concrete
The price of concrete is enough to make you want to choose it but knowing if it is right for you is another story. Not everyone likes concrete and if you want something fancy, like stamped concrete, it is no longer cheap.
How much does concrete cost per square foot?
While concrete is typically measured in cubic yards, installing it costs between $3 and $10 per square foot. Here’s the average total cost of pouring concrete, depending on the total square footage of the area:
How to compare concrete contractors?
When you’re analyzing and comparing concrete contractors, write a list of questions to ask each one, such as: 1 Ask about their experience 2 Find out the estimated time frame and what hours they can work. 3 Inquire if there are any additional costs, like delivery fees. 4 If you’re looking for custom work, like stamped concrete, find out if that's a service they provide.
What is CIP concrete?
Many residential and commercial projects — buildings, parking garages, roof tiles, concrete pavers, fire pits and more — utilize precast concrete and cast-in-place (CIP) concrete. Precast concrete is cast into a specific mold or shape and then sent to the job site, whereas CIP concrete is poured and molded at the job site.
What is concrete used for?
Concrete has a variety of uses in home improvement projects and additions, including patios, driveways and garage floors . To help you get a better understanding of prices for your project, here are the average costs of installing concrete patios, concrete driveways, foundations and more:
How thick is a concrete slab?
While the standard thickness of a concrete slab is 4 inches, your project might require greater depth for a stronger slab, like for a building foundation. A greater thickness will likely raise the cost.
How to calculate cubic yards?
To calculate the cost in cubic yards, you’ll have to: First, multiply the length by the width (the total square footage) by the depth in feet. Then, divide that number by 27, the total number of cubic feet in a cubic yard. Add about 5% to 10% to the cubic yard in case of spilling and waste.
Can you mix concrete in batches?
Mixing concrete in big batches requires heavy equipment, specialized tools (like concrete forms) and significant experience. However, there are small repair projects a seasoned DIYer should be able to manage using ready-mix concrete. These projects might include patching or resurfacing a worn or pitted slab.
Concrete Slab Installation Cost Estimate
Note: For the sake of this cost estimate, exact dimensions (in feet) have been given to reflect the different price points. Costs may be lower or higher depending on the size of the slab. All costs have been calculated at a rate of $6 per square foot.
What Is a Concrete Slab?
A concrete slab is composed of wet cement mixed with additional materials (usually gravel). This mix is poured onto a gravel bed bordered by a wooden frame, the latter typically made from standard lumber like 2x4s or 2x6s.
Cost of a Concrete Slab
Concrete is fairly inexpensive when compared with other materials like stone or brick. Expect to pay a base cost of around $6 per square foot for the material itself, or within a range of $4 to $8 per square foot depending on factors like labor and concrete thickness.
Additional Factors Impacting Cost
Though not all of these factors may be relevant to your situation, they each have the potential to significantly change the overall cost of your project.
DIY vs. Professional Installation
With careful planning and preparation, it is entirely possible to install a simple concrete slab by yourself. The process is time and labor intensive, so set aside at least a week to complete it—which should cover everything from preparing the form to allowing the concrete to set and cure.
Frequently Asked Questions (FAQs)
At $6 per square foot, a 10×12 slab of concrete will cost $720. This cost may vary depending on the additional specifications and requirements of the project.
Should I order concrete by the yard from a ready mix company or just use bags?
Larger jobs such as driveways are easier to complete when ordering concrete by the yard, rather than trying to mix bag after bag by hand. For smaller jobs, like a walkway, modest patio or footings, you should calculate the number of concrete bags instead.
Calculating the amount of concrete needed for slabs (including odd shapes)
Rule of thumb: add 1 / 4 " to the thickness of your slab for your slab concrete budget. This assumes you have the job evenly graded to the right depth, and the grade is well compacted.
Calculating the amount of concrete needed for footings
Footings will rarely follow the drawing exactly. In rocky soil the footings may collapse when big rocks are excavated
Estimating concrete steps
Steps seem tricky to calculate but are not. If there are three steps leading up to a porch:
Calculating the amount of base fill
Granite Construction has an excellent base fill calculator on their site. Use this to figure how much material you need for the subgrade.
Requesting your ready mix supplier to visit your site
After you have chosen a Ready Mix Supplier, have a representative come to your site to give his/her opinion on the quantity required. Compare the figure with what you came up with. Discuss any variances with the supplier.
How Much Does Concrete Cost Per yard?
Cost Estimator by Amount of Concrete
- On average, homeowners pay $117 per cubic yard of concrete, with a typical cost range between $104 and $144 per cubic yard. But don’t start calculating your costs just yet –– there’s something you need to know about buying in bulk, and it’s called a short load fee. Buying by the truckload is typically a total of 10 cubic yards, though this can vary...
Other Factors That Affect Cost
- Most homeowners can expect to pay between $104 to $144 per cubic yardwhen buying a truckload (or more) of concrete. But how can you estimate where your concrete order will fall within that range? And if you live far away from the concrete mixing company or need delivery on the weekend, you might see an additional cost on your final bill. 1. Type of Concrete: The strong…
Extra Services
- Pouring concrete yourself might save on labor costs, but it doesn’t save you time and energy. Sometimes hiring a concrete contractor to install the concrete slab for you is the way to go. Once your concrete is poured –– either by you or a professional –– it might look a little bare in the landscape. Maybe add curving walkways or attractive retaining walls. We’ll review the cost of lan…
Cost of Concrete Across The U.S.
- The costs listed in this pricing guide are all national averages. On a local scale, the cost of concrete might vary depending on supply and demand in your region.
Diy Concrete Installation
- If you woke up to a morning to-do list taped to the fridge that reads “Pour a 10 x 20 concrete patio in the backyard,” you’ve got good reason to say, “Honey, I can’t.” Concrete installation isn’t an ideal project for the average DIYer, as it’s easy to make costly mistakes with concrete. When pouring concrete, you have to get the timing just right; otherwise, you waste an expensive truckload of m…
Conclusion
- When you’re pouring a large slab of concrete, sometimes skipping the bags and buying in bulk can save you a lot of money. And don’t let calculating cubic yards scare you –– it’s easy to determine how many cubic yards you’re going to need as long as you know the dimensions of your concrete slab. Your concrete patio will be great for hosting cookouts, but who wants to party outdoors wh…