The cost of a wheel hub (assembly or bearings) can start from as low as $60 and go well over a hundred dollars. The make and model of your car, will determine the exact price. Wheel hub replacement costs can vary from car to car as well as who you buy them from.
How much does it cost to replace wheel hub assembly?
We’ll show you what it costs to have it replaced and what you can expect during the replacement process. You will pay from $130 to $550 for hub assembly replacement. The labor should cost you about $70-$90, while parts will run between $65 to $400.
How hard is it to replace a hub assembly?
What to look for when buying or replacing bearings
- Beware of cheap bearings constructed of low quality steel with poor heat-treating. ...
- Cheaper hub assemblies might include bearings that are smaller than OEM, which is another factor that could lead to early part failure. ...
- Note that manufacturers recommend a torque wrench rather than an impact wrench when installing. ...
How do you replace a wheel bearing hub assembly?
- Remove the wheel and brake caliper assembly and set them aside so that you have working space around the wheel hub.
- Locate the small, rounded cap in the center of the hub.
- Use the screwdriver and/or pliers to pull out the cotter pin from the slotted nut that is in the center of the hub.
How often does wheel hub assembly need to be replaced?
When the car is ran, the hub assemblies will have to work to ensure that the wheels turn as they should. The wheel hub assemblies on a car are intended to last for about 100,000 miles. While this can happen, there are usually things that will happen before this milestone hits that will compromise the assemblies and the way they function.
How much does it cost to replace the wheel hub?
The cost to replace one front-wheel hub assembly varies widely. Some variables include the make and model, the garage's labor rate and the cost for parts. The national average is about $350 to fix the wheel bearings at one wheel. As you might imagine, however, luxury brands cost more.
How much does it cost to replace a wheel bearing assembly?
These bearings are unbolted from the steering knuckle, and a new bearing bolted on. Expect to pay for 1-2 hours of labor to replace per side, usually between $80-200.00.
How long does it take to replace a wheel hub assembly?
Replacing a single wheel bearing can take 90 to 120 minutes depending on the type of vehicle and complexity. There are a lot of moving parts that need to be maintained and properly sealed to complete this type of work.
Can you drive with a broken wheel hub?
Q: Is it safe to drive with a bad wheel bearing? A: No. It can, in fact, be very dangerous to drive if one of your bearings is worn out, especially since it may cause the wheel to stop while driving. Additionally, a damaged wheel bearing puts a lot of stress on the hub, the CV joint, and the transmission itself.
How do I know if my wheel hub is bad?
Signs of Hub Damage During Normal DrivingSnapping, clicking or popping noises when cornering or making sharp turns.Grinding noise when the vehicle is moving.Knocking or clunking sensation from the vehicle.Wheel vibration and/or wobble.Poor steering control.Shudder, shimmy or vibration at a constant speed.More items...•
Can I change only one wheel bearing?
If bearings go bad at one wheel, it is unnecessary to replace the bearings at the other wheel on the same axle.
Is it hard to replace a wheel hub?
Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.
Are wheel bearings expensive?
On average, a wheel bearing will set you back $50 to $120, while a new wheel hub costs around $200 to $500. Be careful when buying new bearings and wheel hubs as many cheap parts are unfortunately of low quality.
Do I need to replace the hub assembly or just the bearing?
Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.
What does a bad hub assembly sound like?
The most common symptom of a bad wheel hub assembly or wheel bearing is a rumbling, squealing, growling or chirping noise coming from the wheel or tire area of your car.
What does it sound like if a wheel bearing is going out?
0:563:16What Does a Bad Wheel Bearing Sound Like? - YouTubeYouTubeStart of suggested clipEnd of suggested clipDo it so you're gonna hear a sound that sounds a little bit like a growl. So you hear that growl.MoreDo it so you're gonna hear a sound that sounds a little bit like a growl. So you hear that growl. Sounds like the right front. Wheel. That's a pretty significant growl now the faster we get going the
What happens if wheel bearing goes out while driving?
If your wheel bearing fails, it can cause the wheel to stop while you are driving or possibly even to fall off. At the very least, before a wheel falls off, a failed wheel bearing can/will cause significant damage to your vehicle, so it's very important to keep an eye on these and keep them maintained.
Do I need to replace the hub assembly or just the bearing?
Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.
How much does it cost to get front wheel bearings replaced?
The cost to replace both front wheel bearings is going to be between $260 and $480. The parts alone for the front wheel bearings are about $120 to $200. However, the labor costs will be a bit more extensive at around $140 to $280.
How long does it take to fix a wheel bearing?
The time taken to replace a wheel bearing is also slightly different depending on whether the bearing is on the front or rear wheel. A front wheel bearing replacement on average takes around 90 minutes, whereas a rear wheel bearing replacement takes on average just under 1 hour.
Are wheel bearings hard to replace?
Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.
How Much Does a Wheel Hub Cost?
The wheels are obviously one of the most heavily used parts, so maintaining a solid connection between the wheels and the car chassis is very important for a smooth ride. Wheel hub costs will vary depending on who you buy from and the brand your choose.
How much does it cost to replace a wheel hub?
The cost of a wheel hub (assembly or bearings) can start from as low as $60 and go well over a hundred dollars. The make and model of your car, will determine the exact price. Wheel hub replacement costs can vary from car to car as well as who you buy them from.
How Much Does Labor Cost For a Wheel Hub Repair?
A wheel hub repair can vary drastically depending on your vehicle. If you have a truck odds are it will be a more involved process than a small car. If you have ABS, there are going to be more steps to go through to repair or replace your wheel hub. In addition if you need bearing to be pressed in, this will add to the time it takes and cost to the repair.
Why does my wheel hub make a grinding sound?
A faulty wheel hub will make a grinding sound, when driving your vehicle forwards . In many cars the hub assembly is also connected to the anti-lock braking system.
How to find the correct wheel hub?
To find the correct wheel hub that is guaranteed to fit your car at an unbeatable price, use the Year, Make, and Model search at the top left of this page . If you find the wheel hub cheaper somewhere else, give one of our US based auto specialists a call and we will match that price, 1-888-907-7225. All wheel hub orders over $99 come with Free Shipping and an industry leading warranty.
Can you move a car without a wheel hub?
Like a lot of parts in your car, without them you wouldn’t be able to move it. There are many differences even between similar makes and models that could lead to variations in labor times. If the suspension design requires special equipment and more steps to get to the wheel hub, the time will start to add up.
Can you save money by buying wheel hubs?
You might be used to the convenience of buying replacements parts directly from the mechanic. But with the right know-how, you can save a lot of money on car parts by purchasing from online stores. Then after you buy the wheel hubs from us, take them back to your mechanic for install, and only pay them for labor. You can save hundreds, sometimes even thousands by doing this.
How much does it cost to replace a hub assembly?
On average, the cost of replacing a hub assembly is about $220 for a passenger car, and about $370 for a light truck. That includes labor, which is about an hour in most cases.
What is hub assembly?
A hub assembly bolts to the knuckle on one side, hold the wheel bearings, and has the wheel bolted onto its other side. In the past there would have been multiple replaceable and serviceable parts involved; bearings and races, the hub flange or integrated rotor, grease seals, and spindle.
How much does it cost to replace a rear hub on a 2004 Camry?
On a 2004 Camry with the 3.0 liter engine, the labor time to replace a rear hub assembly is 1.6 hours. A factory part costs about $598, or an SKF part costs about $140. That makes the job about $758 using OE parts, or about $300 using aftermarket parts. On the front of the vehicle a cartridge bearing is used.
How much does it cost to replace a 2009 Ford Fusion rear hub?
On a 2009 Ford Fusion with a 3.0 liter engine, the labor time to replace the rear hub assembly is .9 of an hour. A rear hub assembly costs about $68 for a Timken part, or about $180 for an OE part. This would make the job to replace the rear wheel bearing about $158 with aftermarket parts, or about $270 with OE parts. The front of the vehicle uses a cartridge bearing rather than a wheel bearing.
Why are wheel bearings noisy?
A wheel bearing that is just a little noisy can generate enough heat at highway speeds to experience what we call “sudden catastrophic failure”, which is best avoided.
How long does a hub last?
There is no normal expected life span, and no maintenance that can be done. Usually if a hub assembly lasts over 100,000 miles (and they usually do), that’s considered decent.
What are the advantages and disadvantages of a hub assembly?
The advantage of a hub assembly is that it’s all one piece, sealed, and no servicing is necessary. Of course, the disadvantage is that if anything goes wrong the whole thing needs to be replaced. But they are generally very reliable and long-lived parts, and they are also pretty straightforward to replace.
What is the Wheel Hub Assembly all about?
The wheel hub holds a vehicle’s wheels in place. When properly functioning, the front hub ensures that a vehicle’s tires turn freely, that the ABS system works properly, and that fuel efficiency is normal. A rear wheel hub provides a solid mounting point for the rear wheel to bolt onto and ensures smooth rotation at all speeds.
Why do you need to replace a wheel hub?
Because the wheel hub holds the vehicle’s wheels in place, it is a critical component and should be fixed as soon as possible. Wheel hub replacements should be done in pairs, because when one is worn to the point of needing replacement, the other will generally have the same amount of wear.
What common symptoms indicate you may need to replace the Wheel Hub Assembly?
Whirring or grinding noise from the area of the front hub, located near the center of the vehicle’s wheels, underneath the hubcap
What to do if your wheel hub needs to be replaced?
If you suspect that your wheel hub assembly needs to be replaced, you should schedule service from one of our expert mechanics immediately. Replacement of a wheel hub assembly may require specialized tools that are best left operated by professional mechanics.
Do auto mechanics have overhead?
It depends on the type of car you drive and the auto repair shop you go to. Our mechanics are mobile, which means they don't have the overhead that repair shops have. They provide you convenience by coming to your home or office.
How much does hub assembly cost?
Compare your quote to other individuals from around the country to make sure you are getting the best deal. The average for Hub Assembly is $330
What Is Hub Assembly Replacement?
While the hub assembly replacement is straightforward, it can take a while, and it often requires some specialized tools to get done. If the problem persisted for a while and nothing was done about it, then there may be damage to the wheels, axle and other car parts that will drive up the cost of repairs. That’s why it is so important to have this replacement service done as soon as you realize there is a problem.
How to tell if wheel assembly is bad?
Your steering may seem loose, or you may have a hard time gettogether vehicle to turn. You may also hear a grinding or a whirring noise at the front of the vehicle, near the hubcap. You may also have some trouble getting the vehicle to stop when pressing the brakes. These are signs that it is time to have the wheel assembly looked at right away.
What is the hub on a car?
The wheel hub assembly is what holds the wheels in place. It helps with turning, assists the ABS and even boosts fuel efficiency. Over time, excessive wear on the wheel assembly will cause it to break down and wear out. We’ll show you what it costs to have it replaced and what you can expect during the replacement process.
What happens if you replace a wheel hub?
When you get the wheel hub assembly replaced, you will enjoy better control over your steering and a smoother ride. If the wheel assembly is too damaged, you may not be able to drive at all, so getting it fixed means that you can operate your car again.
Can you drive a car with a wheel assembly problem?
If the wheel assembly starts to break down, it can come loose from the axle, making for a serious safety hazard. You shouldn’t drive your car when you have a wheel assembly problem. There’s a chance that the problem has been going on for a while and you just didn’t notice it.
When do wheel bearings need to be replaced?
Wheel bearings need to be replaced if they are found to be worn, loose, or leaking during related repairs or inspections.
Why do wheel bearings rumble?
Wheel bearings need to be replaced if they are found to be worn, loose, or leaking during related repairs or inspections. A failing wheel bearing can cause a "rumbling" noise while turning and while driving at speeds greater than 15 miles an hour.
How much does a hub bearing cost?
Here, the cost of the bearing is usually the bulk of the expense, as most hub bearings run between $80.00 to $300.00. Many of these have ABS sensors built into them. These bearings are unbolted from the steering knuckle, and a new bearing bolted on. Expect to pay for 1-2 hours of labor to replace per side, usually between $80-200.00.
How much to replace rotors?
These bearings can easily be replaced, are less expensive to buy, and generally cost around $6-20.00 per unit, and $80-100.00 to service, along with the cost of replacing the rotor usually, as the bearing race is pressed in. All in, labor and rotor, most vehicles will run around $150.00 to replace and go up depending on rotor cost. In many cases, it’s cheaper to replace the rotor than it is to remove and press in a new bearing race.
Can You Replace Wheel Bearings Yourself?
You can lower your wheel bearing replacement cost by changing them yourself. You should be able to do this in your own garage. However, it will require some specialized tools. Make sure to reference your vehicle’s service manual or seek out online information and determine the kind of wheel bearing your car or truck is geared up with prior to starting the repair work. Keep in mind that AutoZone rents all the specialized tools you will need to replace your wheel bearing and does so for free! Learn more about Loan-A-Tool here.
Is a Noisy Wheel Bearing Dangerous?
Driving on a damaged wheel bearing can be dangerous, considering that the wheel bearing is not sufficiently lubed and friction is extremely high at this point. This friction generates heat, which will eventually disintegrate the bearing more, when can lead to complete failure, wheel off, or loss of control of the vehicle. This can occur anytime you are driving.
How much does it cost to replace a steering knuckle bearing?
Popular in German and Japanese vehicles, these units are the sealed roller bearing that you see on the back of the complete unit. In these cases, the entire steering knuckle must often be removed from the vehicle, and the bearing pressed out, and the new one pressed in. While the cost of the bearing drastically diminishes (usually these run between $25.00-50.00) the labor involved to replace the bearing goes up, usually to the tune of 2-4 hours to replace ($160-400.00).
How long does it take to replace a wheel bearing?
First-timers should expect the job to take around 4-6 hours.
Is a rear wheel bearing a hub bearing?
Rear wheel bearings today are usually no different than fronts in terms of a complete hub bearing or pressed-on units. In the vast majority of cases here, a complete unit is used and unbolted / bolted to the rear transaxle (2WD vehicles) or independent rear axle.
What is a wheel hub assembly?
Responsible for attaching the wheel to the car, a wheel hub assembly is a pre-assembled unit that features precision bearings, seals and sensors. Also called a wheel hub bearing, hub assembly, wheel hub unit or hub and bearing assembly, the wheel hub assembly is a crucial part of your steering system contributing to the safe steering and handling of your vehicle.
What is the purpose of a wheel hub?
First and foremost, the wheel hub assembly keeps your wheel attached to your vehicle and allows the wheels to freely turn enabling you to safely steer.
What can happen if I drive with a damaged wheel hub assembly?
Driving with a bad wheel hub assembly is dangerous. As the bearings inside the assembly become worn out, they can cause the wheels to stop turning smoothly. Your vehicle can become shaky and the wheels not secure. In addition, if the hub assembly degrades, the steel can fracture and cause the wheel to come off.
How to tell if hub assembly is failing?
A failing wheel hub assembly can present a variety of symptoms including: Growling, humming, squeaking, chirping or squealing from the tires when driving at 30-45mph . Steering wheel may shake as you drive. ABS light will come on if the sensor isn’t reading properly or if the signal is lost.
What to do if your wheel hub is failing?
If you suspect that you have a failing wheel hub assembly, take your vehicle to your trusted mechanic for service.
What is the purpose of the ABS wheel sensor?
The sensor constantly relays to the ABS control system how fast each wheel is turning. In a hard braking situation, the system uses the information to determine if anti-locking braking is needed. Your vehicle’s traction control system also uses the ABS wheel sensors to operate.
How much does it cost to replace rear wheel bearings?
Rear Wheel Bearings. On average, you can expect to pay between $190 and $310 for the parts associated with replacing your rear wheel bearings. The average labor costs will be between $225 and $350.
What happens if your wheel bearing is worn out?
If a wheel bearing is worn out or defective, it will cause your car to slow down unintentionally or it will prevent your car from moving at all. If the car slows down then you’ll notice a lot of shakiness and loud squeaky noises when it moves.
Why do bicycles have bearings?
You’ll even find them in bicycles because they use wheels to move as well. Bearings come in many different shapes and sizes, depending on the make and model of your car. The job of a wheel bearing is to help the wheel spin without causing much friction. If a wheel bearing is worn out or defective, it will cause your car to slow down unintentionally ...
Is labor more expensive than parts?
The sad thing is the labor costs are usually more money than the parts cost. But if you don’t know anything about auto mechanics then you don’t want to risk doing the job yourself or else you could cause additional costly damage to your car.
Can you replace bearings that are sealed?
You may think it would be wise to have your bearings serviced but you won’t be able to do that because the bearings are sealed. All you can do is wait for them to go bad and then replace them.
