Receiving Helpdesk

how much is a serpentine belt for a mazda 3

by Arnoldo Hilpert Published 3 years ago Updated 3 years ago

How much does a Serpentine/Drive Belt Replacement cost? On average, the cost for a Mazda 3 Serpentine/Drive Belt Replacement is $128 with $33 for parts and $95 for labor. Prices may vary depending on your location.

The average cost for a Mazda 3 serpentine belt replacement is between $121 and $136. Labor costs are estimated between $56 and $70 while parts are priced at $66. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.

Full Answer

When should serpentine belt be changed Mazda 3?

90,000 milesTypically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.

How much should it cost to replace a serpentine belt?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you're looking at around $100 to $195 to replace your serpentine belt.

What is a serpentine belt Mazda 3?

The drive belt/s on your Mazda 3 uses the engine revs to power the accessories in or on the engine of your vehicle. These may include your power steering, water pump air conditioning compressor and alternator. Most Mazda 3's have 1 or 2 drive belts and in some instances, it may be called a serpentine belt.

Are serpentine belts expensive to replace?

A typical serpentine belt generally starts at around $15 and goes up to $80 at most. Add to that the labor costs that can range from $75 and $120. Altogether, you're looking at around $90 to $200 (plus taxes and fees) to replace your serpentine belt.

What are symptoms of bad serpentine belt?

Common signs include a squealing noise from the front of the vehicle, power steering and AC not working, engine overheating, and cracks on the belt.

What does a worn serpentine belt sound like?

Belt Noise As these belts wear out, they can begin to squeak or squeal. They make noise because there is not enough tension on the belt, or because the pulleys are misaligned or weak. Often, simply changing the belt will make it stop squealing. The noise isn't usually a danger, though it does sound alarming.

When should I replace my serpentine belt?

Your serpentine belt was made to last. Under ideal circumstances, your car's serpentine belt should last 60,000–100,000 miles. It's important to replace this belt as part of your vehicle's scheduled maintenance (even if it looks okay) to avoid it breaking while you're on the road.

How do you change a serpentine belt on a 2017 Mazda 3?

2:227:54[HD 1080p] How to Replace Mazda 3 Serpentine & AC Drive BeltsYouTubeStart of suggested clipEnd of suggested clipThe belt tensioner takes a 14 millimeter socket. And we can release all the tension on the belt youMoreThe belt tensioner takes a 14 millimeter socket. And we can release all the tension on the belt you can see here you just flop the belt right off well we have this we can just slide this. Off.

How do you change a serpentine belt on a 2014 Mazda 3?

1:053:23Replacing Serpentine Drive Belts - Mazda 3 Skyactiv 2.0 (2014-2018)YouTubeStart of suggested clipEnd of suggested clipSo we'll use a shop rag to remove it wrap the rag around the belt and use a 21 millimeter socket toMoreSo we'll use a shop rag to remove it wrap the rag around the belt and use a 21 millimeter socket to turn the crankshaft pulley pull on the rag as you rotate the crank to pull the belt. Off.

Can you drive with a broken serpentine belt?

Can I Continue Driving My Car If the Serpentine Belt Is Broken? Technically, yes, you can continue driving your car, but not for long. For instance, without power steering, you're likely to get exhausted very quickly from driving. Still, that's not the worst part.

Can I replace serpentine belt myself?

Automatic belt tensioners, standard in most cars now, make changing a serpentine belt a simple DIY repair. Follow the clear photos and step-by-step instructions and you'll be done in 15 minutes.

Does Walmart do serpentine belts?

Walmart has provided Auto care centers in some of their stores that provide the services of replacing serpentine belts. It is safe to contact the store beforehand to ensure they render such replacement service.

Dayco - Ela Poly Rib Belt (Part No. E050265)

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives.

Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5060520)

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems.

Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5060380)

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems.

Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5060910)

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems.

Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5060900)

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems.

Driveworks - Serpentine Belt (Part No. 910K6)

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems.

Dayco - Poly Rib Belt, Premium - Engineered to conform to high mileage, worn or misaligned drives (Part No. 5060515)

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality... it delivers the solution to troublesome drive problems.

What is a serpentine belt?

The engine in your car has many roles to fill. It has to do more than move. It also has to generate electricity, assist with power steering, cool off the passengers, and keep itself cool.

How does the serpentine belt work?

As the engine's crankshaft pulley turns it drives the serpentine belt. In turn, the belt drives the pulleys for the other systems including the air conditioning, alternator, water pump, cooling fan, and power steering.

What are the symptoms related to a bad serpentine belt?

Over time serpentine belts stretch, crack, and the ribs that ride on the accessory pulleys being to wear smooth. A squealing noise that increases with engine speed or as engine driven accessories are turned on may be noted. The noise is caused by the belt slipping on the pulleys, insufficiently driving them.

Can I drive with a serpentine belt problem?

A slipping belt means one or all of the accessories are not being driven properly. Loss of air conditioning, electrical power, power steering, or water pump and fan drive are possible depending on the severity of the wear. If left for too long the belt can shred or come off of the pulleys.

How often do serpentine belts need to be replaced?

Replacement intervals vary by vehicle and driving conditions. We typically see this part replaced approximately every 100,000 miles.

Find Your Cost

What is a Serpentine Belt? Symptoms of a broken Serpentine Belt How urgent is a Serpentine Belt replacement? Related repairs How can we help?

What is a Serpentine Belt?

Don’t worry, it’s just a name for a car part. Though I'm sure there have been cases of snakes popping out from under the hood. A serpentine belt is a modern drive belt or fan belt. It’s responsible for transferring rotational force from the engine to different components in the car.

Symptoms of a broken Serpentine Belt

Look, I know the check engine light seems so insignificant. Well, it isn't. The check engine warning light is actually pretty important. If your car’s serpentine belt is failing, then systems will stop working, your car’s computers will be alerted, and the check engine light is likely to come on.

How urgent is a Serpentine Belt replacement?

Depends. Do you want an engine that overheats, a battery that dies, and a lack of power steering?

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump.

When to consider replacing the serpentine belt

Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.

How do mechanics replace the serpentine belt?

Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle.

When replacing the serpentine belt keep in mind

On many cars, the expected service life of a serpentine belt is around 90,000 miles.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

What is the Alternator Belt all about?

The alternator is a generator that converts mechanical energy into electrical energy. It uses the revolving motion of a magnetic field around a stationary armature creating electricity which is then stored in the car’s battery and operate electrical functions.

Our recommendation

Your mechanic will check the condition of the alternator belt every time the oil is changed. If they notice the belt appears frayed, cracked, or is missing pieces, you should have the belt replaced.

How important is this service?

If your alternator belt breaks while you are driving, you may lose electrical power to important systems inside your vehicle or the engine may die. You could be left stranded or in a dangerous situation. Replace the alternator belt as soon as you notice unusual wear.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

Bad Serpentine Belt Symptoms: Mazda 3

Here are the most common symptoms of a bad serpentine belt in the Mazda 3:

Mazda 3 Serpentine Belt Replacement

Replacing a serpentine belt is a straightforward process. Your 3 uses a tensioner to keep the serpentine belt tight.

Conclusion: Bad Serpentine Belt Diagnosis – 3

Serpentine belt replacement is something that any shade tree mechanic can do with very few tools. So if you have reason to believe that a bad serpentine belt is causing your Mazda 3’s engine to squeal, replacing it might be exactly what you need to do.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9