Cost of T1-11 Siding
| T1-11 Siding Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Material Prices | $120.00 - $192.00 | $168.00 - $252.00 | $240.00 - $336.00 |
| Installation Cost | $252.00 - $384.00 | $360.00 - $516.00 | $504.00 - $648.00 |
| Total | $372.00 - $576.00 | $528.00 - $768.00 | $744.00 - $984.00 |
How much does T1-11 plywood siding cost?
Most commonly, homeowners choose between T1-11 (often referred to as plywood) and OSB (oriented strand board) to achieve a more natural look. The average cost to install T1-11 plywood siding ranges between $1,500 and $3,700, with an average of $2,500 for 500 square feet of exterior wall space.
What are the pros and cons of T1-11 exterior siding?
Versatility, ease to work with, flammability, upkeep – these are just a few of the pros and cons of choosing T1-11 as an exterior siding option. Depending on the unique needs, interests, and limitations of specific contractors and homeowners, T1-11 siding may or may not be the best fit for your next home building project.
When is the best time to buy T1-11 siding?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season. Try to budget and additional 7-15% more on top of what our calculator gives out – I.e; difficult configurations, patterns, the additional complexity of your home will add to the T1-11 Siding costs.
What size nails are needed for T1-11 siding?
Siding nails are a great option to limit the amount of splitting that might happen during the installation of T1-11. For thicker material, the size of the nails is usually 8d, while thinner material will only require smaller nails.
Is T1-11 siding cheap?
One of the reasons this siding has been some popular is because it is soooooo cheap. At the time of this writing you can get a sheet of T1-11 siding for only $38. Since the sheet is 32 SF you can side a whole building for $1.18 per SF which is far cheaper than almost any other option on the market.
Is T1-11 waterproof?
This type of plywood siding is injected with rosins and other chemicals, under pressure, to make it waterproof and protected against termites, rot, and fungal decay. It is the best version of T1-11 siding as it lasts considerably longer. Both Plywood and OSB T1-11 siding should be treated or primed.
Is T1-11 better than plywood?
However, the plywood version of T1-11 is far superior overall to the OSB version because of its greater durability and the variety of finishing options it offers. Plywood T1-11 is also known simply as plywood siding.
What is better than T1-11?
LP SmartSide is an engineered wood product that is more weather-resistant than T1-11 siding. It is less susceptible to rot, fungal decay, insect damage and thus requires less maintenance. LP SmartSide is, overall, a better cladding solution for most people.
Do you need plywood under T1-11 siding?
It is best to check the local building code to determine if plywood sheathing is required. Even though it may not be considered necessary, many builders feel it is best to use plywood under T1 siding if the structure will be used for human habitation.
Should you nail or screw T1-11 siding?
T1-11 siding is designed for installation on framing with standard 16-inch spacing. You can attach them with exterior screws or galvanized nails.
Does T1-11 need to be painted?
Personalization. The other downside of OSB T1-11 is you can't stain this siding. It must be primed and painted, taking away one of the primary reasons homeowners choose to go with this particular siding material.
Why do they call it T1-11?
Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The 'T' in T1 stands for "textured," which references the grooves or channels cut into the siding.
How do I install T1-11 siding myself?
0:492:17How To Install T1-11 Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by setting the hangers four to six inches in from each vertical seam and complete this layoutMoreStart by setting the hangers four to six inches in from each vertical seam and complete this layout on each wall. Put the DHR rear tab up under the sheathing and fasten.
What thickness T1-11 should I use?
The most common T1-11 siding sheet thicknesses are 11/32”, and 19/32”. For most applications, you only need the thinner versions, as you won't need the structural strength that ¾” siding imparts. The grooves in T1-11 siding may be four or eight inches apart, depending on the mill that made it.
How can I make my T1-11 siding look better?
Paint It. A fresh coat of paint makes everything look better, and painting T1-11 is less trouble than painting many other types of siding. If it hasn't ever been painted, giving it a coat of primer saves you paint in in the long run by sealing the grain and preventing the top coat from soaking in.
Is T1-11 siding pressure treated?
T1-11 siding features narrow, evenly spaced grooves on a rough-finished board for a pastoral appearance. Pressure treated for above ground applications, T1-11 siding features grooves spaced either 4" or 8" on-center to provide options for achieving the look you desire for your home, shed or pump house.
How much does it cost to install T1-11 siding?
The average cost to install T1-11 plywood siding ranges between $1,500 and $3,700, with an average of $2,500 for 500 square feet of exterior wall space. For OSB siding, that cost stays in the same general range, but the average drops down to $2,200 for the same 500 square feet. That averages between $3.50 and $7.20 per square foot. Prices might change depending on the material you choose, labor time required, and where you live.
How long does T1-11 siding last?
Most T1-11 siding has an average lifespan of 15 to 20 years. You can increase that lifespan by regularly staining and/or painting the exterior, fixing holes in the board before water can penetrate, and installing a gutter system that keeps moisture away from the plywood.
How much does OSB cost to paint?
OSB needs to be primed and painted rather than stained, which helps both appearance and waterproofing. Expect to pay between $700 and $2,000 to paint your wood-based siding. Weatherproofing also includes making sure that any edges you cut when building or repairing your siding are properly sealed.
How thick is OSB siding?
Like T1-11, it is typically sold in sheets that measure 4 foot by 8 foot, at the following prices based on thickness. Depending on where you purchase the sheet, thickness might be measured in millimeters.
How much does it cost to stain plywood?
In addition to painting, you can also stain the exterior surface, which costs between $600 and $2,500 depending on the size of your home and the painters you hire.
Which is more durable, plywood or OSB?
Plywood tends to be more durable, and provides a greater range of finishing and customization options. Meanwhile, OSB holds moisture longer and can warp due to water damage. If you need help deciding between the two or during the installation, consult with a professional to get started.
Is T1-11 siding good?
It works well as a siding material because of the large panel size that covers a larger area, as opposed to single boards of wood. As a result, T1-11 continues to be popular in home construction and remodeling today. Learn more about T1-11 siding options and benefits.
How much does T1-11 siding cost?
This sheet of T1-11 siding costs $33 per sheet.
What is T1-11 siding?
In the pursuit of the answer to the question of what T1-11 siding is, is that it’s an engineered wood siding product that can help add protection to your structure and given its natural characteristics is often used on sheds and barns.
What size nails are needed for T1-11?
For thicker material, the size of the nails is usually 8d, while thinner material will only require smaller nails.
What happens if you don't use nails on T1-11 siding?
Without the use of good fasteners, in this case the nails used for the T1-11 siding, the material is prone to getting lose, allowing air leaks to arise and cause the range of problems that moisture inside the material could be providing to your structure.
What is split log siding?
Split logs – a popular wooden look which can be made from other types of wood as well as fiber cement. Shingles and shakes – Plywood is installed in big panels, not as shingles and shakes. Lap siding – this is a very traditional look in which the different parts overlap.
What is a T1-11?
T1-11 is a type of siding made of plywood, meaning it’s a material made from thin sheets of wood veneer. These are glued together to give you the look you see. It also means that this is an engineered type of wood.
How long has T1-11 been used as siding?
While originally being developed as a temporary solution before intended to be replaced or having siding added on top of it, some homeowners report having left it as their main siding for 30 years.
What are the disadvantages of T1-11 siding?
Yet by far, the most notable disadvantage of T1-11 siding is that it’s susceptible to water damage and long-term exposure to the elements. Because of its plywood composition, untreated T1-11 siding can really take a hit from moisture.
How much does it cost to stain a T1-11?
If starting with untreated T1-11 siding sheets, staining can cost upwards of $600, depending on the surface area of the structure.
What is a T1-11?
For most homeowners and homebuilders – even first-time homeowners looking for an entry-level DIY project – T1-11 is a simple, unintimidating material that makes construction projects fast, easy, and affordable.
How much does a T1-11 panel measure?
Typical T1-11 siding has an edge measuring 3/8 inches where the next panel will overlap to create seamless continuity.
What is the advantage of T1-11?
Image Credit – lancasterbarns.com. Another advantage of T1-11 is that it’s quite easy to work with. Because it’s a plywood-based material, it’s fairly simple to cut and maneuver without using fancy, expensive, or job-specific tools.
What is T1-11 used for?
Commonly used for siding, T1-11 has also been a popular material choice for other DIY projects, including tool sheds, dog houses, duck blinds, and interior ceilings. This widely used building material came onto the scene in the 1960s, and it was quickly adopted as one of America’s favorite home building materials for many reasons.
Is T1-11 plywood strong?
Because it consists of several thin wood layers that are bonded together, T1-11 plywood siding is considered to be a fairly strong siding option. Whether you’ve seen it advertised as T1-11 ...
What size is T1-11 siding?
What sizes does t1 11 come in? Most T1-11 siding products come in sheets measuring 48×96 inches or 48×120 inches. Just like plywood, T1-11 siding comes in a variety of thicknesses. The most common T1-11 siding sheet thicknesses are 3/8”, 5/8”, and 3/4”. The grooves in T1-11 siding may be four or eight inches apart.
What is T1-11 wood siding?
T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The 'T' in T1 stands for "textured," which references the grooves or channels cut into the siding.
