Cost of Concrete Slabs
| Concrete Slabs Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Concrete Slabs – Material Prices | $185.00 - $205.00 | $234.00 - $256.00 | $257.00 - $289.00 |
| Concrete Slabs – Installation Cost | $450.00 - $535.00 | $645.00 - $960.00 | $1080.00 - $1295.00 |
| Concrete Slabs – Total | $635.00 - $740.00 | $879.00 - $1216.00 | $1337.00 - $1584.00 |
How much does a 40x40 concrete slab cost?
You may spend between $6,400 and $12,800 on a 40×40-foot foundation. However, concrete slabs are available with various features, including different thicknesses and materials for reinforcing the foundation. The estimate of $6,400 to $12,800 assumes that you want a concrete slab with standard features, including:
How much for a 30x40 concrete slab?
Typically, a 30×40 metal building is placed on top of a concrete slab. A 30×40 concrete slab that’s 6 inches thick can cost between $8,000 and $12,500. Keep in mind that this cost is for a general-purpose building, such as a garage. If you were to build a home or commercial structure, the cost of the foundation may be higher.
How much does it cost to pour a cement slab?
How much does it cost to pour concrete yourself? Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That’s about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that’s 6 inches deep. Materials alone cost about $4 per cubic foot.
How to quickly pour a concrete slab by hand?
Instructions
- Make up the formwork. Make up the formwork out of 100×20 (1×4) or 100×50 (2×4) lumber. ...
- Ensure the formwork frame is square. ...
- Lay the formwork in place. ...
- Dig a trench around the perimeter. ...
- Saw off the tops of the pegs. ...
- Dampen the pour area. ...
- Start pouring the concrete. ...
- Lay a rod of #3 rebar. ...
- Fill the pour area up with concrete. ...
- Smooth over the concrete. ...
How much does it cost to pour a 20x20 concrete slab?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How much does it cost to pour a 20x30 slab?
Concrete Slab Prices By SizeSlab SizeSquare FeetAverage Cost Installed15x15225$1,38820x20400$2,46824x24576$3,55420x30600$3,7026 more rows
How much does it cost to pour a concrete slab per square foot?
Cost of a Concrete Slab Concrete is fairly inexpensive when compared with other materials like stone or brick. Expect to pay a base cost of around $6 per square foot for the material itself, or within a range of $4 to $8 per square foot depending on factors like labor and concrete thickness.
How much does a 20x20 concrete patio cost?
between $1,200 to $6,000A 20-foot by 20-foot concrete patio runs between $1,200 to $6,000, including labor and materials. Adding decorative finishes and colors could make the price even higher.
How do you quote a concrete job?
Local ready-mix concrete suppliers can give you quotes once you define the project specifications and provide the job location. Concrete pricing is typically quoted per cubic yard or cubic meter (metre). For an average estimating number, you can use $77 per cubic yard.
Can I pour my own concrete slab?
Used for walkways, patios, and floors, concrete slabs are inexpensive to install and durable enough to last for years. When you pour your own concrete slab, you're giving yourself a design material that is adaptive to many of your outdoor design needs, while saving money that would have been spent on a contractor.
How thick should a concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How much does it cost to pour a 10x12 concrete slab?
Cost of concrete per square footSlab SizeSquare FeetAverage Cost10x10100$60010x12120$72010x20200$1,20012x12144$86418 more rows•3 days ago
How do you charge for concrete?
A concrete slab costs between $4.34 and $7.73 per square foot, with an average cost of $6.60 per square foot. The national average cost of a concrete slab is $6.60 per square foot for materials and labor. Most homeowners can expect to pay between $4.34 and $7.73 per square foot for concrete installation.
Which is cheaper pavers or concrete?
The up-front cost of pavers can run anywhere from $8 to $25 per square foot, while concrete runs about $3 to $6 per square foot.
How many yards of concrete do I need for a 24x24 slab?
7.11 yardsFor example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
Is it cheaper to build a deck or concrete patio?
It's cheaper to build a concrete patio in terms of both the initial cost to lay a concrete patio, as well as its cost of maintenance over time. A concrete patio costs only $4 per square foot, while a deck costs roughly $6 per square foot for lower-cost pressure treated lumber.
How much does a 10x12 slab of concrete cost?
At $6 per square foot, a 10×12 slab of concrete will cost $720. This cost may vary depending on the additional specifications and requirements of t...
How thick does a concrete slab need to be?
The standard thickness for a concrete slab is four inches. If you plan on putting a lot of weight on your slab (such as building a structure on it,...
Is it cheaper to pour concrete yourself?
Yes. In general, you can save up to 40% or more if you pour a concrete slab yourself. If you decide to mix your own concrete, you can save even more.
Is gravel needed underneath a concrete slab?
Gravel is required before pouring a concrete slab. This not only helps provide a level surface for your slab, but also prevents any cracking, shift...
How much does a concrete slab cost?
The average cost for a basic concrete slab is $6.60 per square foot. When you increase the slab’s durability, strength, and quality with reinforcements, it’s normal to see additional costs on your bill. Reinforced concrete slabs cost between $9.29 to $10.04 per square foot.
How much does it cost to build a concrete patio?
A poured concrete patio averages between $4.40 to $16 per square foot for labor and materials. Keep in mind that the prices below do not include land preparation costs.
Why do you need a wire mesh for a concrete driveway?
The wire mesh helps prevent cracks from developing, holds the concrete slab together when it does crack, and evenly distributes weight.
What to do with a concrete slab after it's installed?
Once the pros have installed your concrete slab, it’s time to put it to good use. Show it off with some attractive landscaping, pair it with a deck, or add a pergola for shade and privacy .
How much does it cost to install a concrete driveway?
On average, homeowners pay between $6 and $14 per square foot to install a concrete driveway.
How thick is a concrete driveway?
Concrete slabs are typically between 4 and 6 inches thick, though concrete driveways can be as much as 8 inches thick to withstand heavy vehicles.
What is concrete made of?
A concrete mix is made up of sand, cement, water, and loose aggregates. Depending on the mixture’s composition, the concrete’s strength will vary.
How much does a concrete slab cost?
Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Who gets better prices on concrete slabs?
Concrete Contractors or, Mason companies will most always get better prices on Concrete Slabs — saving your back and additional costs of Concrete Slabs materials, so shop around, ask your neighbors if they can recommend someone.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Can you install concrete slabs yourself?
Installing Concrete Slabs isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a Concrete Contractor or, mason company to perform the work for you. Concrete Contractors or, Mason companies will most always get better prices on Concrete Slabs — saving your back and additional costs of Concrete Slabs materials, so shop around, ask your neighbors if they can recommend someone.
How Much Does It Cost to Pour a Concrete Slab Yourself?
You can expect to save on average $2.55 on labor per square foot by pouring a concrete slab yourself. However, pouring concrete is no easy task.
How Much Does a Concrete Slab Cost Per Square Foot?
On average, a new concrete slab will cost $6 per square foot, or $110 per cubic yard. The mixture’s grade plus the slab’s size and thickness determines the cost. Additional factors affect the cost of a concrete slab as well, such as subbase preparation, forms, finishing, reinforcements, and the local price of concrete.
How Much Concrete Can I Get on My Budget?
Concrete alone costs between $3 and $4 per square foot. A typical concrete slab for residential construction is between 4 and 6 inches thick. How much you budget determines how big of a slab you can get, and how thick.
Should I add reinforcements for my new concrete slab?
By adding reinforcements, you increase the strength and durability of your concrete slab. The price of concrete often includes fibrous mesh, but wire mesh or rebar is a separate cost. Reinforcements are needed depending on the concrete’s thickness and the quality or type of soil under the slab.
What should I consider when pouring a new concrete slab?
Depending on the size and location of your project, you can judge whether a precast slab would be more cost-beneficial than pouring a concrete slab. Keep in mind additional costs are associated with pouring concrete, including labor, concrete forms, reinforcements, decorative enhancements, finishing, and curing.
Should I buy or build a concrete slab?
Prefabricated concrete slabs are poured offsite and delivered to you. If the slab required for the area is large, a prefabricated concrete slab may not be possible.
How much does it cost to pour concrete?
For the most part, the typical price range of $4 to $8 per square foot includes labor. However, if your project requires the use of specialized equipment—such as any machines needed for grading—the cost can skyrocket. For example, a single pump truck (used to pour concrete if your build location is too difficult for a standard concrete truck to access) can tack on around $900. Keep this in mind especially if you are doing a DIY install, since you will need to rent or buy any equipment you do not have.
How much does it cost to finish a concrete slab?
Adding any kind of finish and design—whether it be stenciling, staining or engraving—can bump up your final cost from $8 to $18 per square foot. If you desire a fully bespoke or advanced design, you may pay even more.
What Is a Concrete Slab?
A concrete slab is composed of wet cement mixed with additional materials (usually gravel). This mix is poured onto a gravel bed bordered by a wooden frame, the latter typically made from standard lumber like 2x4s or 2x6s. Once the concrete has cured, this frame—also known as the formwork—is removed, leaving behind a fully shaped piece of concrete—the slab.
How long do concrete slabs last?
Concrete slabs are known for being extremely durable. If properly installed and maintained, they can easily last 100 years or more. Though the name “slab” brings to mind an uninteresting flat gray surface, in truth, concrete slabs offer a lot of design flexibility—from the shape of the formwork to any texturizing or colorizing done after the concrete has been poured.
How much does a 10x12 slab of concrete cost?
At $6 per square foot, a 10×12 slab of concrete will cost $720. This cost may vary depending on the additional specifications and requirements of the project.
How much does concrete cost?
Concrete is fairly inexpensive when compared with other materials like stone or brick. Expect to pay a base cost of around $6 per square foot for the material itself, or within a range of $4 to $8 per square foot depending on factors like labor and concrete thickness.
Can you save money by pouring concrete?
Yes. In general, you can save up to 40% or more if you pour a concrete slab yourself. If you decide to mix your own concrete, you can save even more.
How much does it cost to pour concrete?
It costs about $6 per square foot to pour concrete, or between $4 and $8 per square foot. Cost varies based on factors like concrete thickness and location of the project.
How much does concrete cost per yard?
Concrete’s typically sold at about $110 per cubic yard. Here’s how to calculate what you’ll need for your project: Multiply the length of your project by the width and then by the depth. Divide by 27, the number of cubic feet in a cubic yard. Add 10 percent in case of spilling.
What is slab flatwork?
Slab flatwork is messy, complicated work. These types of jobs refer to your walkways, driveways and concrete floors. From demolition work to prep reinforcement to edging, each one of these jobs requires expertise and equipment most people don’t have available. You may save a couple thousand dollars on labor, but if the end result is a shoddy driveway or a floor that’s not properly reinforced, you could get yourself into a financial hole trying to fix the problem. Ultimately, concrete installation is very difficult unless you’re extremely experienced with DIY.
How much does precast concrete cost?
Precast concrete costs between $20 and $30 per square foot. This cost is for a 200-square-foot cast and 100-square-foot cast, respectively. This price can go down based on the size of the cast, according to the Precast/Prestressed Concrete Institute. The larger the cast, the less it costs per square foot. Other factors that affect price include:
How much does it cost to finish a concrete driveway?
The cost to finish concrete ranges from about $4 to $18 and up per square foot for a typical two-car driveway.
How much does it cost to install a concrete patio?
The cost to install a concrete patio is $2,780. Some of the significant factors that make up the price include:
What factors determine whether a slab on grade is a good foundation?
Factors like climate and soil type influence whether or not slab on grade is a good foundation for you. You’ll need to speak with a structural engineer near you before making any decisions.
Factors That Affect the Price of Pouring Concrete
In estimating the cost of pouring a concrete slab the size of 12 by 12 feet, it is important to first understand the various factors that affect its cost. This is to ensure you won’t be surprised later on when you do commit to this type of project, especially if you plan to pour more than one layer.
Pouring a 12-by-12 Concrete Slab
On average, some areas can cost as low as $50 for pouring a 12-by-12 slab of concrete. Otherwise, inclusive of materials and installation, a 12-by-12 patio will cost roughly $796 to $1,476 at $4 to $8 per square foot.
DIY vs. Hiring Pros
Now that you know the average costs of pouring a 12-by-12 slab of concrete, should you go the DIY route or hire professionals to do the job for you?
Save Money, Time, and Effort
It can be tempting to go the DIY route when pouring a 12-by-12 concrete slab, but this might work to your disadvantage in the long run. While it might cost a little more to hire pros like Big Easy Concrete to do the job, you’re actually saving money.
More from Big Easy Concrete
Big Easy Concrete is your go-to concrete pouring contractor in New Orleans. We’re a Louisiana-insured company ready to provide you quality.
How to find the square footage of a concrete slab?
Take the length of the concrete slab x the width of the slab to get the total square footage.
What is a concrete slab?
A concrete slab is poured right on a gravel pad and the edges are formed with 2x4's, 2x6's, 2x8's etc.
How much does concrete cost per square foot?
Across the US, homeowners report that ready – mix concrete costs about $98-99 per cubic yard.#N#The average cost of a concrete slab (6 inches thick) is $5.00-5.50 per square foot, including materials and labor. However, the price can go up to $9-10 per square foot depending on numerous factors and enhancement costs.
How much does stamped concrete cost?
Costs for stamped concrete vary greatly; starting at around $8 per square foot, all the way up to $20+ per square foot. Most homeowners pay a mid-range price ...
How much does a concrete overlay cost?
The average cost of this overlay starts at $3-5 per square foot, but can go up to as much as $12-15 per square foot depending on the complexity of colors and patterns you want.
How much does it cost to pave a 640 sq ft driveway?
Thus, to pave a 640 sq.ft. driveway with stamped concrete will cost $5,120 – $7,680. An average size 15×20 stamped concrete patio (300 sq.ft.) costs $2,400-3,600. A typical size pool deck of 800 sq.ft. will cost $8,500 – 12,000. Because there is constant exposure to water, your concrete deck will need to be sealed multiple times with special moisture-resistant sealant. A walkway of (100 sq.ft.) made with decorative concrete will run $1,000-2,500.
What is the benefit of concrete pavement?
Another huge benefit is that concrete pavement requires minimal maintenance compared to other materials. To achieve a custom look, contractors use various types of colors such as stains and powered pigments, and combine them with an array of patterns and textures.
Can you put decorative concrete over existing concrete?
Keep in mind that applying a decorative concrete overlay is only recommended if your existing concrete pavement is in good condition, without major cracks and dents.
How much does it cost to pour a four inch slab?
If you plan on pouring a four-inch slab instead of a six-inch slab, you can subtract about $0.74 per square foot from the $6 per square foot average . If you plan on pouring a five-inch slab, you may pay about $5.63 per square foot for material and labor.
How much does it cost to build a slab?
The average cost is $2.83 per square foot for material for a four-inch-thick slab. Adding a vapor barrier, wire mesh, and thicker edges increases the cost to $4.73 per square foot. Depending on the features that you include, you may pay between $3,396 and $5,676 for the material.
What Does the Typical 30×40 Concrete Slab Include?
The estimate of $4,800 to $9,600 for a 30×40 (1200 square feet) concrete slab is based on a project with the following options:
How much does wire mesh cost?
Wire mesh can be used instead of fiber mesh to further increase the strength of the foundation. The average cost for wire mesh is about $0.40 per square foot.
What is required to prepare a foundation before pouring?
However, before pouring the foundation, additional work may be needed, such as removing tree stumps or grading the soil to make it level. These activities can add up to $1.25 per square foot to the total.
