Full Answer
How much does it cost to sand and refinish stairs?
The price to hire a professional to refinish a wood staircase is $60 to $75 per hour. It takes 2 hours to complete a 10 tread staircase. How much does it cost to sand and restain stairs? The price is $120 to $150 in total to sand and restain a 10 step flight of stairs. This includes a laborer's time with power tools, wood stain, and cleaning up.
How much does it cost to stain or restain hardwood floors?
Cost to stain or restain hardwood floors. Restaining hardwood floors costs $0.50 to $2.00 per square foot alone. Sanding, staining, and refinishing wood floors costs $2 to $7 per square foot total. Staining is only necessary to change the wood color.
How long does it take to refinish a concrete staircase?
Basic labor to refinish stairs with favorable site conditions. Prep up to 5 hr per 100 SF - remove debris, spot fill and patch level. Remove finish layer by sanding.
Where can I get better prices on refinishing stair products?
Flooring contractors and General Contractors will most always get better prices on Refinishing products — saving your back any additional costs of Refinish Stair materials, so shop around, ask your neighbors if they can recommend someone. 172 people found this helpful. Was this guide helpful to you?
How much does sandless floor refinishing cost?
How much does it cost to rent a floor sander?
How much does it cost to refinish parquet floors?
How much does it cost to refinish engineered hardwood floors?
How long does it take to refinish hardwood floors?
What is refinishing wood floors?
How much does it cost to whitewash hardwood floors?
See more
How much does it cost to sand and stain staircase?
The price for refinishing stairs is $4.50 to $8 per square foot for materials and a contractor. Stair replacement costs depend on the number of steps and surface area. Total project cost to refinish a 10 step staircase is $90 to $160, including material and labor time.
How much does it cost to get stairs stained?
Whether you choose to paint or stain your stair, you can expect to pay anywhere from $90 to $450 to work on an average 12- to 13-step stairway....Painting vs Staining a Driveway.ProjectAverage Cost (Labor Included)Staining$90 - $160Painting$350 - $450
How much does it cost to sand hardwood steps?
Average cost to refinish hardwood floorsOptionCost per square footSand and refinish$1.50 – $5.00Sand, stain, and refinish$2.00 – $7.00Screen, buff, and recoat$1.00 – $2.50Apr 19, 2021
What is the cheapest way to refinish stairs?
0:5310:20DIY Stairs Makeover for Under $200 with Full Cost Breakdown!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I start off by eliminating the connection between the drywall and stairs by adding a 1-inch pieceMoreSo I start off by eliminating the connection between the drywall and stairs by adding a 1-inch piece of trim to the top of the stringer.
How do you strip and Restain stairs?
0:5714:06How to Refinish Wood Stairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext step sweep we're vacuum up all of the debris. The next step is to sand the treads. And theMoreNext step sweep we're vacuum up all of the debris. The next step is to sand the treads. And the riser.
How much does it cost to re carpet stairs?
How Much Does It Cost to Carpet Stairs per Square Foot? The cost to install carpeting on stairs is $3.50 to $11 per square foot. You will also have to pay an extra $11 to $26 per step for more complicated installations that require extra cutting, a higher number of tack strips, and unusual shapes like curves.
Is it cheaper to sand and refinish hardwood floors?
Refinishing vs. Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
Do hardwood stairs add value?
As CNN reported, hardwood floors can also increase home value by 3-5%. This makes them a very attractive prospect for anyone looking to sell their house in the near future. However, even if you don't plan on moving any time soon, hardwood floors may still be a good investment.
How much does it cost to refinish 500 square feet of hardwood floors?
Cost per square foot to refinish hardwood floors:Flooring square footageAverage cost100 - 250 sq. ft.$600251 - 500 sq. ft.$750501 - 750 sq. ft.$1,601751 - 1000 sq. ft.$2,1003 more rows•Oct 26, 2020
How do you make old stairs look new?
8:3713:42EASY DIY Staircase Makeover on a Budget - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe rubber backing sticks to the steps and keeps it in place. And then the the rug itself it they'veMoreThe rubber backing sticks to the steps and keeps it in place. And then the the rug itself it they've got really pretty patterns. They're inexpensive this each one cost about $10.
How do you restore old stairs?
Steps to Refinishing Your Stair Treads:Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper. ... Clean. Vacuum between passes, then wipe down the treads with a tack cloth. ... Sand again. ... Clean again. ... Treat the wood. ... Stain the treads. ... Apply the Finish. ... Sand, then repeat two more times.
How do you update a staircase?
1:1319:06Amazing Staircase Makeover...Updating After 30 Years!YouTubeStart of suggested clipEnd of suggested clipSo everything for this staircase was new but we did preserve our original hand railings and whatMoreSo everything for this staircase was new but we did preserve our original hand railings and what they did was they sanded them down and stained them to match our wooden floors.
Best Hardwood Floor Refinishing Near Me - Yelp
Find the best Hardwood Floor Refinishing near you on Yelp - see all Hardwood Floor Refinishing open now.Explore other popular Home Services near you from over 7 million businesses with over 142 million reviews and opinions from Yelpers.
How To Refinish Hardwood Floors - The Home Depot
Before floor refinishing with a sander, you should pull up the shoe base moulding along where the floor meets the wall. Pry up the moulding with a pry bar, using a piece of scrap wood to protect the baseboard.; Number or otherwise label each piece as you remove it to make it easier to put it back after refinishing the floor.
How much does it cost to repair stairs?
The cost to repair stairs is $4.50 to $8 per square foot for all material, an expert's time, and fittings. Replacing the handrail costs an additional $30 to $45 per linear foot. The total average project cost to repair stairs and railings is $666 or between $306 and $1,055.
How much does it cost to refinish a hardwood staircase?
The average cost to refinish hardwood stairs is $135 compared to $1,500 to replace a 10 step staircase, including all materials and labor time.
How much does it cost to add stairs in a basement?
The costs to add new basement stairs are $1,000 to $2,000 for materials and a contractor’s time. In most cases, aesthetics for below-ground installations are less critical, so they are cheaper than ground or upper floors.
How much does it cost to replace a 10 foot railing?
The total price to replace a 10 foot length of a railing is $300 to $450, which includes a basic wooden handrail, labor time, and clean up. The cost to install stair railing and balusters together is more expensive due to extra time and material required.
How much does a step cost per square foot?
Surface area impacts on cost with the average price per square foot of step costing $6 for materials and installation. Making safe stairs requires a 30 to 35 degree angle. Steeper staircases cost slightly less because they require fewer steps from bottom to top.
How much does it cost to install a banister?
The installation cost for a banister is $25 to $40 per linear foot for the labor time only. It requires 3 to 4 hours to fit a 10 foot section. For the rail material and fittings, it is an additional $5 to $7 per linear foot.
How much does it cost to install a newel post?
The average price to install a newel post is $365, including labor costs and mid-range materials. Single posts cost $35 to $550. The price depends on the dimensions and type of material. One post is used at each end of the rail.
How much does it cost to stain stairs?
The cost to stain stairs ranges from $25 to $75 on average, depending on the chosen stain. Wood stain can be used in place of primer and paint. It brings out the wood’s natural beauty while protecting the surface. Oil-based stains tend to be less expensive than gel stains. If you put oil-based gel stain on stairs, you can expect the paint to penetrate the surface well and remain durable enough to cover blemishes for years to come. The lower cost to stain a stair railing with oil-based stain is worth it for many homeowners who accept the fact that oil fades over time and gives off an odor. In comparison, gel stains can be applied using a spray mechanism, and no rubbing is needed for the gel to penetrate wood stairs. Gel does not adhere well to busy spots like staircases. You need to allow at least 48 hours for the paint to dry.
How much does a professional stair painter charge?
The painter will then paint and clean up when complete. Professional painters typically charge around $50 per hour. An average 12 ft. high, straight stairway of 63.5 sq. ft. with minimal prep including priming and painting would cost about $550.
Why paint a stairway?
Painting a stairway refreshes a room with a new look. It can turn boring stairs into a focal point in any decor and create a more personalized space. Stairways may seem simple and even basic. However, they are complex, with numerous risers and treads.
What type of paint should I use for stairs?
The type of paint for stairs impacts the overall project costs, with some paint varieties costing more than others. Anti-slip and acrylic latex are some of the most popular and long-lasting, although they are more expensive. Anti-slip paint may use a clear, water or urethane-based sealer to offer better protection against slips and falls. This is a good choice for hardwood floors that may be slippery and senior residences where stairs can be harder to navigate. Acrylic paint is popular for stairway projects and other interior painting work, thanks to its combination of an acrylic resin and polymer solution. It doesn't take long to dry and is easy to maintain with a bit of soap and water to remove scuffs and stains.
How much does it cost to paint a stair railing?
On average, homeowners pay around $4 to $16 per linear foot of stair railings 6 painted by professionals. Most stair railings are between 5 and 10 feet long, spanning the length of the staircase. The painting project’s cost could be anywhere from $20 to $160 or more if a special type of paint is required or the railing has an intricate design that requires small brushes and more time. If the railing is being painted along with the balusters, spindles, and risers, it may be best to leave the railing until the end so the staircase can be completely assembled ahead of time. Primer and a finishing coat lock in the color for longer, especially when painting wood stair railings.
Can you paint stairs from the front door?
Exterior stairs may lead from the front door to the front sidewalk or the deck down to the backyard. The costs of interior and exterior stairway painting are similar. However, an outside job may require specialized paints to ensure the paint lasts for a long time, even with constant exposure to the elements.
Is it better to paint stairs?
High-quality paint for stairs is a smart investment. The better quality of paint, the higher the cost will be. However, the lifespan increases exponentially. If you want to add interest and contrast to your stairway, you may consider a combination of paints, or some paint and some stained and finished surfaces.
How much does sandless floor refinishing cost?
Sandless floor refinishing costs $1.50 to $4.00 per square foot. Sandless refinishing uses chemicals to etch the old finish off, followed by a tinted finish that hides scuff marks and restores the wood's color and sheen. Sandless methods are not effective for floors with scratches, stains, or damage.
How much does it cost to rent a floor sander?
Renting a floor sander costs $60 to $70 per day or $230 to $270 per week. Renting an edger to handle the room's corners and edges costs $37 to $46 per day or $170 to $185 per week. DIY refinishing projects typically take several days, depending on the home's size.
How much does it cost to refinish parquet floors?
Cost to refinish parquet floors. Refinishing parquet floors costs $2 to $6 per square foot , depending on the type of refinishing and if any repairs are needed. Sanding parquet floors requires special care from a professional because the wood grain runs in several directions.
How much does it cost to refinish engineered hardwood floors?
Refinishing engineered hardwood floors costs $2 to $6 per square foot on average. Engineered flooring features a base layer with a solid hardwood wear layer on top. Engineered floors may be sanded and refinished 1 to 5 times, depending on the wear layer's thickness.
How long does it take to refinish hardwood floors?
Hardwood floor refinishing is a time-consuming home improvement project and takes 2 to 6 days on average. Hardwood floors should be refinished every 7 to 10 years, depending on thickness, species, and age. Pine, bamboo, and parquet floors require special care while sanding or staining, but costs the same to refinish.
What is refinishing wood floors?
Hardwood floor refinishing in kitchen - before and after. Wood refinishing jobs typically removes pet stains, water damage, scratches, dings, fading, sun damage, discoloration, Polishing, buffing, and recoating cost less but only removes minor scuffs and scratches and adds a new sheen.
How much does it cost to whitewash hardwood floors?
Cost to whitewash hardwood floors. Whitewashing hardwood floors costs $2 to $7 per square foot and requires sanding to remove the old finish and then applying a light wash and clear polyurethane topcoat instead of a darker stain. Whitewashing is also known as pickling. Never use paint to whitewash a floor.
