How much does it cost to restore a 30-foot yacht?
As an example, you may buy a tired-looking 30-foot boat for $30,000. Add on around $25,000 for the restoration work carried out by skilled trades, plus $15,000 for your own time—a total cost of approximately $70,000. Compared to the price of a new 30-foot yacht of around $120,000, that’s quite a saving.
How much does it cost to recover a sunken boat?
So without further ado, here goes an article about the average recovery cost of a sunken boat. Get your hands on some tissues and get reading. So how much does it cost to recover a sunken boat? Hiring a salvaging company costs between $3,500 - $7,000, depending on the length of the boat. It's expensive but risk-free.
How much does it cost to salvage a fishing boat?
Hiring a salvaging company costs between $3,500 - $7,000, depending on the length of the boat. It's expensive but risk-free. Doing it yourself will cost between $500 - $1,500 - at the risk of damaging the boat, the equipment, or yourself. Pricey stuff, I know.
What does it mean to recover a boat?
Let's recover it. First things first - by recovery I mean lifting the boat up from underwater into a position that will make it possible to work on fixing it. What happens beyond that is a matter for another article.
Are boats expensive to fix?
Boats are expensive to buy and maintain. As well as the cost of the boat to buy you also have mooring costs, insurance, licenses, and much more to pay for each year. Boat expenses for repairs are also very common and will hit you in the pocket.
How do you restore an old boat?
1:2510:57Old Boat Restoration - START to FINISH! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i was like okay i'll try and work out how to do this diy i'll take my time over the next yearMoreSo i was like okay i'll try and work out how to do this diy i'll take my time over the next year year and a half and build up this boat.
How do you make an old boat look new again?
Restoring life to your coat of wax. For boats that look old but feel new, try Life Wax. Not only will this wax protect your surfaces, but can often remove light oxidation. And since it's pre-softened, application is easy and not labor-intensive.
Can you refurbish a fiberglass boat?
Generally, refinishing a fiberglass boat involves replacing this gel coat to ensure that the coat looks smooth and continues to protect your fiberglass. When you clean in between refinishing sessions, it's important to use products that will not harm the gel coat.
Are old boats worth restoring?
Restoring a boat is a labor of love and something you are not likely to take on unless the boat concerned has some special meaning for you or you're trying to save money. It is vital to understand that boats do not generally appreciate value unless they have some historical significance.
How do you flip a boat for profit?
Flipping Boats for Profit: How to Make Money: Flipping boats is a profitable job where you buy a boat for cheap and sell it for a profit. This can be done by buying them, then fixing, cleaning, detailing, restoring, repowering, or improving them in some fashion to sell the boat for more money than what you have in it.
How much does it cost to paint a boat?
The professional topside painting will cost you $100 to $400 per linear foot. However, the average price is often $200 to $250 per linear foot for an undamaged boat, particularly when choosing low-quality paint. For instance, you need to set aside $4,000 to $5,000 for an average 20 feet (6 m) long vessel on average.
How much does it cost to restore gelcoat?
So, if you are getting professional, they might charge you around $300 to $500 per foot for the entire process. One-third of the cost is for the materials, and the rest two-third is the labor cost. As an example, with a 16-foot craft, prepare to spend around $8000 on re-gel coating.
How do you upgrade an old boat?
1:098:08Top 5 Cheap and Easy Upgrades for Your Old Ski Boat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i think it just looks great like i said before it's very easy to cut you just measure it cut itMoreAnd i think it just looks great like i said before it's very easy to cut you just measure it cut it trim it peel the back off stick it down make sure that the surface is rough. And you're good.
How do you bring a fiberglass boat back to life?
0:184:12How To Restore Gel Coat Fiberglass Boats in 2 Steps - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep number one is the heavy cut oxidation remover this product does most of the work for you it'sMoreStep number one is the heavy cut oxidation remover this product does most of the work for you it's going to remove the oxidation the staining for both standard. And unpainted gel coat surfaces.
How do you make a fiberglass boat look like new?
5:246:20Make Your Fiberglass Boat Shine! [ PRODUCT LIST BELOW] | BoatUSYouTubeStart of suggested clipEnd of suggested clipAnd then I'm going to use my polishing bonnet on the slower speed polisher just to finish it off soMoreAnd then I'm going to use my polishing bonnet on the slower speed polisher just to finish it off so let's get started. So. There we are looks fantastic feels great reflects.
Can you gelcoat over old gelcoat?
Can You Spray Gelcoat Over Gelcoat? The short answer's yes. But first, make sure the surface is free from dirt and debris. Using the window frame analogy again, you wouldn't apply new paint over old paint without preparing the surface.
Leave It In There?
What? Alright, let's get this out of the way first. I don't judge, I get it, you are considering letting the boat be. Maybe the recovery costs listed above wouldn't make sense when compared with what you'd pay for a new boat, maybe they would but you don't have the funds, whatever the case, you are thinking about letting nature take care of it.
Pro or DIY recovery?
Given the price, you might be tempted to save money by going at it DIY style, but unless you are brave or have done this before, more likely than not, you will have to hire professionals to do it for you.
The Pro Way
If you decide to leave it to the professionals, expect to pay about 3 500 USD per day of work, with this task needing one to two days to finish. With a few extra dollars added on top to be sure, you are easily looking at a 5.000 - 10 000 dollar expense.
The Do It Yourself Route
Now that I have scared you from doing it yourself, let me tell you how to do it yourself. Disclaimer - if you go down this path, you might be saving money, but you won't be saving your time or your nerves.
How To
You will need a boat that you should put downwind from the sunken vessel. After that, dive down and attach the liftbags to the boat. You don't want to attach them to cleats or rigging if you are using large liftbags - rather run a few strong belts under the boat and attach the liftbags to each of their ends.
missinginaction Senior Member
Most of you know I did a restoration on a small cruiser from 2007 until 2014. I'm actually still at it, even though I've been using the boat since 2014. I make improvements every year, some big, some small. Keep in mind that this 1973 Silverton sedan is only 25.5 LOA with a 10.5' beam.
Tiny Turnip Senior Member
Great thread starter - many thanks MIA. I would add - especially if anyone is contemplating a restoration or build at the same time as a full time job, raising a family, studying or similar, the ability to keep working at it evening after evening for perhaps several years is a HUGE ask - keeping the morale going.
Ike Senior Member
When I restored my 1972 18 foot Sea Ray SRV190, I stopped adding up the cost at around $6000.00. I never did track my labor, but it took about 6 mos, working almost every day, just to get it where I could put it in the water, and then the engine needed a lot of work.
grady Novice
So....If I may. I'm in a slightly different "Boat", I've always purchased boats that were in the best condition i could afford. Which has always been just above average.
tpenfield Senior Member
Your restoration might be on the high end of the cost scale. I totally get your comments about folks asking guidance on doing restoration on the cheap. . . it doesn't happen . . . and they end up spending the amount of money necessary or abandoning the project.
missinginaction Senior Member
As I read these replies a few things cone to mind. First, Tiny Turnip is a wise man. I could never have done what I did had I been working. I poked and planned a little but waited until I was done working before starting in earnest. It's also a good idea to consider your family. I see a lot of divorced boaters and I wonder......
chowdan 1980 PAC41 Liveaboard
As I read these replies a few things cone to mind. First, Tiny Turnip is a wise man. I could never have done what I did had I been working. I poked and planned a little but waited until I was done working before starting in earnest. It's also a good idea to consider your family. I see a lot of divorced boaters and I wonder......
Plan and Set Up Your Workspace
If you’re purchasing a boat, make sure you have a dedicated space on your property for the restoration. Storing the vessel in a shipyard at the marina means you’ll have to waste time traveling between the shipyard and your home when restoring the boat.
Workspace Requirement
If you don’t have the space to store the boat at your home, look for suitable premises you can rent close to where you live. We recommend finding a place with an overhead cover allowing you to work in all weather conditions, and don’t forget the need for power outlets for your tools.
Basic Restoration Tools
You’ll need to make sure you have the following restoration items and tools before starting your project.
Boat Inspection
When purchasing your boat, make sure you give it a complete inspection before making your final offer. It’s a good idea to have a professional inspect the boat for you and point out any problems before you make your purchase. The last thing you need is to discover damage or engine/electronics problems after paying the owner.
Create a Master Restoration List and Prioritize Tasks
After you finalize your purchase and have the boat assessed by a professional, it’s time to plan the restoration. Planning doesn’t take much time, and it will end up saving you plenty of time and money in the restoration process.
Create a Restoration Calendar
After you finish prioritizing the tasks involved with your project, it’s time to map out your schedule on your calendar. A goal is only a dream until you put a timeline to it, and this phase of your planning is as critical as the prioritization phase.
How to Restore a Boat – Checklist
By now, you should understand the basics of what you need for a boat restoration project. It’s no simple task, and you can expect to spend anywhere from a year to two years or more on the restoration, depending on the condition of your boat.
Scarborough817
you need to resize the pics just use tiny pic and select the message board size. Personally I would take a look at tinboats.net too you may be able to find a build of the same model as your boat there
Crappiebasser
Is it fiberglass or aluminum? Both can be painted but glass is a little harder and more expensive to do right. If the hull is solid it's worth painting IMO.
Crappiebasser
It really doesn't look bad. A good buffing and trailer sand and paint would make it look a lot better.
How much does it cost to change the color of a boat?
So, if you are getting professional, they might charge you around $300 to $500 per foot for the entire process. One-third of the cost is for the materials, and the rest two-third is the labor cost.
What is the best way to make a boat look new?
Re-gel coating a vessel is the best way to make it look new and increase its longevity. If you have a small watercraft, I would suggest you re-Gelcoat it yourself. But, if you own a big boat, then glam it up with the help of professionals.
Why gelcoat a boat?
You might be surprised to know that fiberglass hulls are not entirely impervious to water and can absorb water to form blisters.
Why is fiberglass used in boats?
Though fiberglass is used in boats to provide durability, it is susceptible to damage and becomes weak ( fiber blooming) due to ultraviolet rays present in sunlight. This is where a gel coat comes in handy.
How long does paint last on boat hulls?
Paints are prone to chipping and provide almost no protection to the hulls from harmful chemical reactions. Paints last for only two years and are difficult to maintain.
What is crazing in a boat?
Crazing is a common issue that can damage the vessels deeply if left untreated. Labour and material cost increases due to crazing, as it needs a considerable amount of sanding and grinding to fix the cracks first. Then some heavy-duty epoxy is used for filling and patching before the final finish coat is applied.