How much does it cost to repair an asphalt driveway?
The national average cost of asphalt driveway removal is $1,000-$3,000, including debris disposal, and averages out to $1-$3 per sq ft. The final bill you receive, however, will vary based on a wide range of circumstances that will ultimately determine the cost of your project.
How much does it cost to repave a 20x20 driveway?
14/06/2018 · How Much Does It Cost to Replace an Asphalt Driveway? June 14, 2018. Sharing is caring! 0 shares. Share; Tweet; Pin; An asphalt driveway is solid and durable and should last for many years before it needs major repair work or outright replacement. However, this doesn’t mean an asphalt driveway is indestructible! The cost of replacing an asphalt driveway will …
How much does it cost to widen a single car driveway?
20/08/2018 · The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How much does it cost to overlay a driveway?
11/01/2022 · While the typical asphalt driveway repair cost is between $1,000 and $3,600, most homeowners pay $2,300. Fixing cracks or small holes can be as low as $100 to $300. But major repairs that require asphalt resurfacing might cost as much as $3,600. If the pothole or crack is small, you could fix it yourself.
Is it hard to remove asphalt driveway?
Removing an asphalt driveway is a tough job that might cost you a lot of money if you decide to hire a professional. You can remove the driveway yourself--and you can make this tough job much easier--with the right equipment and some patience.
Can I put new asphalt over old asphalt?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).25-Jan-2022
Should I remove old asphalt driveway?
“You should replace your driveway when it's broken up to the point you're tripping and falling over it. My parents' driveway is around 50 years old and they're in their 80s. It has no safety hazards for them, even at their age, so there's no sense in replacing it.”13-May-2021
How do you calculate asphalt removal?
Hiring a company to break up and remove asphalt paving runs roughly $2.50-$3.50 a square foot (although small jobs may cost more per square foot). A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size and the thickness of the asphalt and the gravel base.22-Apr-2015
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.25-Feb-2019
Is it better to resurface or replace asphalt driveway?
While resurfacing is a great option for your driveway, it's not always the best measure. After about 15 years your driveway will naturally lose its structural value. If your driveway is this old, our experts recommend completely replacing the asphalt.14-Aug-2017
What is the difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. As a matter of fact, blacktop is a type of asphalt.
How do you fix crumbling asphalt driveway?
Use asphalt paste patch that contains fine aggregate to fill small holes and gaps along curbing. Mound the repair above the surface the way crews do on roads. They let car tires reduce the speed bumps and gradually compact the mix. You can use a heavy metal tamper, or the end of a 2-by-4 to pound the patch nearly flat.13-Jun-2010
Are there different grades of blacktop?
When it comes to asphalt, you have many choices as homeowners. There are three different grades available in asphalt. The grades available are I-2, also known as base; I-5, known as top ;and the I-4 or commercial top grades.14-May-2014
How many square yards are in a ton of asphalt?
1 cubic yard of hot asphalt mix weighs 2.025 tons or 4050 lbs. These measurements are an approximation and therefore when you are ordering the quantity ensure that you add more asphalt to gather for the waste and you don't run short as you do your pavement project.28-Sept-2020
How much does it cost to pave a driveway calculator?
Cost to Pave a DrivewayDriveway Paving Cost CalculatorZip CodeBasicBestInstallation Cost$1250.00 - $1275.00$2250.00 - $2900.00Total$1625.00 - $1712.50$2800.00 - $3550.00Total Average Cost per square foot$6.67$12.701 more row
How many tons of asphalt are in a dump truck?
limit. Super Dumps are capable of hauling payloads from 19 to 26 tons, if you can properly distribute the loads to each axle. A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.04-Aug-2017
What is asphalt?
Like concrete, asphalt is made from a mixture of cement and aggregates. The adhesive used for asphalt is called bitumen, which is a dark, sticky substance derived from crude oil. This bitumen is heated and mixed with fine aggregate, usually sand or crushed rock.
Is all asphalt the same?
As with concrete, asphalt mixtures are all made individually. Some batches might have a higher concentration of a fine, sandy aggregate, which creates a smooth blacktop surface, and which is preferred for residential driveways.
What causes asphalt damage?
One of the most common causes of asphalt damage is an oil leak from your vehicle, as motor oil will break down the petroleum used to create bitumen. When this happens, asphalt loses its adhesion and chips or holes then form.
How long should an asphalt driveway last?
A typical asphalt driveway might last 20 or 25 years, depending on how well you care for the material. Regular seal coating, as recommended by the installer, will protect the asphalt surface and prolong its life, and help to avoid everyday chips and cracks.
Should you patch, resurface, or replace the driveway?
Even if your home's asphalt driveway is severely damaged, you may not need to replace it, but can often have the material patched or resurfaced. Your options will depend on the driveway's age and the extent of the damage to its surface.
Should you install a concrete driveway?
Concrete has its advantages, but homeowners prefer asphalt for many reasons. If you do need to have your home's asphalt driveway torn out completely, note a few reasons why you might stick with asphalt as a replacement.
How to save money on asphalt resurfacing and replacement
Even though asphalt is typically more affordable than concrete, you may be wondering how to save money on its installation, especially if you need to have your old driveway torn out before having a new one installed. To ensure you're saving the most on your new blacktop driveway, note a few things to discuss with your paving contractor.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
Is asphalt cheaper than concrete?
An asphalt driveway is cheaper than concrete, at $3 to $7 per square foot. In comparison, a concrete driveway costs $4 to $8 per square foot for installation. Concrete is more expensive than asphalt because of the price of its cement binder materials.
How much does it cost to remove asphalt?
Cost to remove an asphalt driveway. The average cost to remove an asphalt driveway is $1 to $3 per square foot , depending on the thickness. This price includes demolishing and hauling away old asphalt. The gravel sub-base may stay in place after removing the old asphalt if it's in good condition.
How much does it cost to heat a driveway?
Heated asphalt driveway cost. A heated driveway costs $12 to $28 per square foot installed, depending on if it's new or a replacement. An average 2-car heated driveway with asphalt repaving costs $6,900 to $16,000. Heating an asphalt driveway prevents ice and snow accumulation.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to pave a parking lot?
Cost to pave an asphalt parking lot. Paving an asphalt parking lot costs $3 to $7 per square foot, not including marking, striping, curbing, or permits. Paving a 10-car asphalt parking lot costs $9,000 to $21,000 on average or $900 to $2,100 per space of 300 square feet.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $900 to $2,100 on average or $9 to $21 per linear foot. Garden paths are typically 30 to 36 inches wide and don’t require a gravel base. Hard-to-access and curved paths with complicated designs cost more because of the additional labor.
How Much Does It Cost to Repair or Patch an Asphalt Driveway?
An asphalt driveway can last for 15 to 20 years. However, cracks and holes can appear over time. When they do, you’ll want to find an asphalt mix that works for your repair and the best price. You’ll also want to decide if you want to hire an asphalt pro near you or do it yourself.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Near You?
Cold or hot temperatures can impact how long an asphalt driveway will last. Plus, it’s possible that UV radiation from the sun can undermine asphalt over time. If you live in an area with seasonal changes, then the price to repair and patch your asphalt driveway can vary quite a bit from the cost in more temperate climates.
What Factors Influence the Cost to Repair or Patch an Asphalt Driveway?
While asphalt is known to be fairly inexpensive, to figure out a more exact price, there are a few factors to take into account. If you are in an area with very hot or freezing temperatures or the type of asphalt solution you choose can raise or lower your total costs.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Yourself?
Sometimes you can repair and patch your asphalt driveway yourself. It may be a dirty job and will take time, but you can save money when you do it yourself.
Repair or Patch an Asphalt Driveway Cost Breakdown
Asphalt is durable. However, in very cold or very hot conditions, even asphalt can break down, and surface-level damage, like cracks and potholes, can appear. For small potholes and cracks—less than one-fourth inch thick—pros will typically charge anywhere from $5 to $15 per square foot .
What is a crack sealant made of?
Hot-pour sealants have an asphalt cement base that might also include rubber and other materials to allow the seal to flex in hot or cold temperatures. Asphalt emulsion sealants are not heated but are liquid applications that use water and an emulsifying agent to allow the asphalt and water to mix.
How often should an asphalt driveway be seal coated? At what cost?
To maintain your asphalt driveway, pros at the Asphalt Institute agree that a seal coat should be applied every 4 to 5 years. Pricing varies, but you will pay about $.08 to $.16 per square foot from start to finish.
Asphalt Repair Cost per Square Foot
Homeowners pay between $2 and $5 per sq.ft. for asphalt 1 driveway repairs. Costs can be higher, depending on the repair method and the damage’s extent. Different repair companies and workers may also have various methods of calculating costs.
Cost to Repair an Asphalt Driveway by Type of Repair
A range of problems can arise with an asphalt driveway, from cracks and potholes to sunken sections and crumbling areas. The repair costs are strongly influenced by the type of problem because some issues are much cheaper and easier to fix than others. The table below shows common asphalt driveway problems and the average repair costs.
Asphalt Driveway Repair Cost by Solution
Repair workers use various repair methods to fix your driveway’s issue, depending on the problem. If there is a crack, they usually fill it in. However, it might need a different treatment like resurfacing if the driveway is crumbling. Different repair methods have differing costs.
Labor Costs to Repair an Asphalt Driveway
Driveway repair professionals can have fixed fees for different repair jobs or charge by the hour, averaging between $50 and $150 per hour. Some have a minimal charge or call-out fee, ranging from $50 to $100. Rates vary by state, and you might also have to pay extra to cover travel costs if the repairman has to travel a long distance.
Asphalt Driveway Maintenance
A good way to reduce the risks of asphalt damage and repairs is to ensure your asphalt driveway is well-maintained.
Repair vs Replace an Asphalt Driveway
You may be faced with the decision of repairing or replacing your asphalt driveway. Often, the best course of action is to repair the driveway. This is cheaper, simpler, and faster in most cases.
Enhancement and Improvement Costs
Pressure washing an asphalt driveway averages $135 to $180. Pressure washing is a great way to clean dirt, debris, and stains from the driveway. Many hire professionals for this service because asphalt responds better to low pressure and must be cleaned with care for the best results.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
Can you use topsoil as a base?
Never use topsoil as a base for any structures which require stability. Topsoil is the soil you use for flowerbeds. The type of soil you need to prepare your new driveway with should be as free of organic compounds as possible. It is also known as ‘fill dirt’.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
What is asphalt driveway?
It is also known as blacktop due to its color, asphalt is a mixture of stones and sand, bound together with materials left over during the production of Petrochemicals such as Pertol, Diesel and Gasoline.
How much does it cost to install an asphalt driveway?
dollars on 2017 (6,649 U.S. dollars). The cost to install an asphalt driveway could be between $2,300 and $10,300 and typically the cost is calculated per square foot.
Is asphalt good for cold weather?
Suitable for Cold Climate – Asphalt is less likely to crack in cold weather. It performs better than concrete in very harsh or snowy climates. Snow removal is also easier with asphalt. Won’t show stains – Because asphalt is generally dark in color, in doesn’t show oil stains.
How many square feet does a ton of concrete cover?
One ton material usually covers 40 to 80 square feet. The quantity you need depends on the thickness of the layers such as a 2 inches thick would cost 80 square feet per ton while 4 inches think would cost 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons.
Does asphalt stain floors?
Oily texture – Asphalt has an oily texture that softens in heat or direct sunlight. If the asphalt gets stuck to your shoes and you track it through the house, it can stain your floors. Rough edges – WIth asphalt, it can be difficult to get a straight, clean edge. Concrete Driveway Cost Per Square Foot.
How much does it cost to resurface a driveway?
Asphalt resurfacing costs $3 to $7 per square foot compared to $8 to $15 per square foot for replacing. The ideal choice depends on the condition of your existing driveway. If your driveway is in relatively good condition with no potholes, resurfacing can save you $5 to $8 per square foot.
Is concrete good for driveways?
As we all know that concrete is highly durable and long lasting and it is another popular material for driveways, especially in the South ern region. Concrete prepared by mixing Cement with a variety of sand and gravel to create this strong, durable material.
How thick should asphalt be?
Although good asphalt paving should be 3-4 inches thick on a 4-6 inch gravel base, residential asphalt may have been installed only an inch or two thick, with little or no base under it -- which makes removal easier.
How much does it cost to rent a concrete saw?
If removing only part of the asphalt and needing to leave a straight line, renting a concrete saw should be about $30-$50 (plus possibly another $25-$125 for wear on a diamond-tipped blade). For large projects, renting a small backhoe or skid-steer (also called a bobcat) with a breaker attachment can be $150-$350 a day.
Can you remove old asphalt?
For larger projects requiring heavy machinery, most excavation or paving contractors also remove old asphalt. Asphalt companies often have equipment specifically designed to rip out old asphalt, although typically they do this as part of a replacement project.
How much does it cost to remove asphalt?
Hiring a company to break up and remove asphalt paving runs roughly $2.50-$3.50 a square foot ...
How much does a short driveway cost?
A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size and the thickness of the asphalt and the gravel base. At least two business days before any digging, call 811 (the free national Call Before You Dig service) to have utility companies mark any underground lines on your property.
Why is it important to hire a concrete removal contractor?
If the driveway removal is not handled properly , damage can be done to surrounding property or underground lines.
What are the factors that affect the cost of concrete removal?
The most common factors that affect the total cost of concrete driveway removal include: Size and depth of the driveway. Location and accessibility of the driveway. Local cost of living and debris disposal fees. Whether or not the concrete is reinforced.
Is it more expensive to remove a concrete driveway?
Naturally, the larger the driveway and the deeper the concrete, the more expensive it will be to break it up and remove it. Likewise, if your driveway is located in an area that has a high cost of living and high waste disposal or permit fees, then you can expect to pay more for your driveway removal.
Does removing a driveway cost more?
And if your driveway is steep or surrounded by buildings or landscaping, it will take more time and effort to safely remove it, which will cost more as well. Another commonly overlooked factor that affects driveway removal costs is the contractor you hire to do it.